APart CMR15T Manual

APart Højttaler CMR15T

Læs nedenfor 📖 manual på dansk for APart CMR15T (1 sider) i kategorien Højttaler. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
COLOUR KLEUR COULEUR POWER IMPEDANCE
Black Zwart Noir Common
GREEN GROEN VERT 2.5 Watt 4 KΩ
WHITE WIT BLANC 5 Watt 2 KΩ
YELLOW GEEL JAUNE 10 Watt 1 KΩ
RED ROOD ROUGE 15 Watt 0.66 KΩ
• Type : Two-Way HiFi
• Woofer : 4” Coated Paper
• Tweeter : 1” Mylar Dome
• Rated Power RMS : 15 W / 100 Volt
• Music Power RMS : 25 W / 100 Volt
• Rated Power RMS : 30 W / 16 Ω
• Music Power RMS : 60 W / 16 Ω
• Trafo Power Tappings : 15 - 10 – 5
- 2.5W
• Impedance: 16 Ω / 100 Volt
• Dimensions Outside : 147 x 220 mm
• Dimensions Cutout : 118 x 192 mm
• Mounting Depth : 60 mm
• Weight : 1.4 Kg
The APart miniature metal CM speaker is a high quality built-in loudspeaker. It has a
full metal frame and a coated dual paper cone for the lowest distortion and increased
resistance against moisture. It can be used for 100 volt speaker lines as well as low
impedance systems, such as hi, surround or multi room ampliers/receivers.
For 100 volt systems, different power taps are present on the high quality built-in line
transformer: for background music with low background noise, you can use the lower
power taps. For maximum sound pressure level, use the highest power tap. The
APart technology avoids any overload of your amplier by applying the unique IMC
protection device.
For use as a low impedance speaker, you can bypass the transformer and connect
directly to the speaker. Our special impedance of 16 ohms allows you to connect up
to 4 speakers per channel onto a regular amplier than can drive 4 ohms, and 2 – 3
speakers onto an amplier than can drive 6 ohms. The APart technology offers you a
rich, clear and efcient sound, surpassing most of the regular 8 ohm speakers.
15 15 15 10 10 5 5 5++ + + + + +80 Watt =
120Watt Amplier
Amplier power must be higher than total power of all speakers.
Het versterkervermogen moet hoger zijn dan de som van de vermogens van de luidsprekers.
La puissance de l’amplicateur doit etre plus élevée que la puissance totale des haut parleurs.
The speaker is very easy to install, rst connect the speaker wires, then carefully
remove the speaker grille. In every corner you will nd a screw attached to the “dog
ears”. Put the speaker in the mounting hole and tighten the mounting screws until the
speaker is securely fastened. Slide the speaker grille back in place. Finished !
16Ω 16Ω 16Ω 16Ω 16Ω 16Ω 16Ω
4Ω 4Ω
16Ω
Please disconnect the 100 Volt transformer for use in low Z applications. Connect the speaker lines on the
speaker directly. All necessary connection hardware is already included and mounted on the speaker.
Gelieve de 100 V transformator bij gebruik in lage Z toepassingen af te koppelen. Koppel de luidsprekerkabels
rechtstreeks op de luidsprekers aan. Alle benodigde verbindingsstukken zijn inbegrepen en reeds op de luidspreker
gemonteerd.
Veuillez déconnecter le transformateur lors d’usage en applications basse-Z. Connectez les cables haut-parleur
directement sur l’haut-parleur. Tout les pièces de connection sont comprises et déjà installées sur l’haut-parleur.


Produkt Specifikationer

Mærke: APart
Kategori: Højttaler
Model: CMR15T

Har du brug for hjælp?

Hvis du har brug for hjælp til APart CMR15T stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler APart Manualer

APart

APart SMB6VP Manual

8 December 2024
APart

APart SMB6V Manual

8 December 2024
APart

APart SMB6 Manual

8 December 2024
APart

APart CM1008 Manual

8 December 2024
APart

APart OVO5 Manual

2 Oktober 2024
APart

APart CM6TSMF Manual

1 Oktober 2024
APart

APart COLW41 Manual

30 September 2024
APart

APart SDQ8T-BL Manual

19 September 2024
APart

APart CM20T Manual

15 September 2024
APart

APart SDX5-BL Manual

11 September 2024

Højttaler Manualer

Nyeste Højttaler Manualer