APart MPLT62-G Manual

APart Højttaler MPLT62-G

Læs nedenfor 📖 manual på dansk for APart MPLT62-G (1 sider) i kategorien Højttaler. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
COLOUR MPLT32 MPLT32 MPLT62 MPLT62
WHITE 4 WATTS 8 WATTS2K5 Ω 1K3 Ω
GREEN 8 WATTS 16 WATTS1K2 Ω 625 Ω
YELLOW 16 WATTS 32 WATTS625 Ω 312 Ω
RED 32 WATTS 62 WATTS312 Ω 161 Ω
BLACK COMMON COMMON
● Type : 2 way exponential horn, long throw
● Woofer : 6.5 inch cone type
● Tweeter : 1 inch horn driver
● Standard colour : light gray
● Rated power handling RMS : 32 W @ 100 volt (model32)
● Rated power handling RMS : 62 W @ 100 volt (model62)
● Transformer power taps : 32-16-8-4 W @ 100V (model32)
● Transformer power taps : 62-32-16-8 W @ 100V(model62)
● SPL 1W/1m: 106 dB
● SPL max 120dB (model32)
● SPL max 123dB (model62)
● Frequency range: 75Hz - 18 kHz
● Dispersion (H x V): 110° x 80°
● IP Rating: 66
● Dim. without bracket (mm) HxWxL: 250 x 360 x 290
● Bracket W x D (mm): 285 x 210
● Weight including bracket : 4.90 Kg (model32)
● Weight including bracket : 5.00 Kg (model62)
Mounting holes : 3 x 10 mm, 60 mm spacing
The MPLT is a 2 way music projector with long throw output performance in order to bring
you quality sound over long distances and in wide areas. Thanks to the well-considered
coverage range, high sensitivity, high output, low distortion and extended frequency response,
this horn loaded 2 way speaker is the ideal loudspeaker for outdoor applications such as
recreational facilities, schools, parking facilities, as well as large indoor applications such as
sports centers, airports, exhibition halls ...
Compared to normal horns and sound projectors, our proprietary designed APart MPLT32
and MPLT62 have a very clear and high quality sound to make it useful for quality music
reproduction, paging or voice alarm with perfect intelligibility, or even alarm tones.
The MPLT’s cabinet is made of high impact ABS, supplied with a strong aluminium bracket
to avoid corrosion, making it fully weatherproof, according to IEC IP-66 Standards. The loudspeaker is equipped with a high
quality 100 volt transformer with several power taps. The standard colour is light grey. From 12 pieces upward, the speaker
can be supplied optionally in any RAL colour (Ref: PAINTMPLT).
62 62 31 31 15 15 7.5 7.5
+
++ + + + +231 Watts =
240 Watts ampli er
Amplifi er power must be higher than total power of all speakers.
Het versterkervermogen moet hoger zijn dan de som van de vermogens van de luidsprekers.
La puissance de l’amplifi cateur doit etre plus élevée que la puissance totale des haut parleurs.
An aluminium mounting bracket for mounting is included in the packing. The bracket allows you to rotate the speaker
over a range of more than 180 degrees. Securely mount the bracket to a wall or other solid surface.
Connect the 100V speaker line to the connector accessible behind the weatherproof cover at the back and make sure
to securely tighten the cable strain relief.


Produkt Specifikationer

Mærke: APart
Kategori: Højttaler
Model: MPLT62-G

Har du brug for hjælp?

Hvis du har brug for hjælp til APart MPLT62-G stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler APart Manualer

APart

APart SMB6VP Manual

8 December 2024
APart

APart SMB6V Manual

8 December 2024
APart

APart SMB6 Manual

8 December 2024
APart

APart CM1008 Manual

8 December 2024
APart

APart OVO5 Manual

2 Oktober 2024
APart

APart CM6TSMF Manual

1 Oktober 2024
APart

APart COLW41 Manual

30 September 2024
APart

APart SDQ8T-BL Manual

19 September 2024
APart

APart CM20T Manual

15 September 2024
APart

APart SDX5-BL Manual

11 September 2024

Højttaler Manualer

Nyeste Højttaler Manualer