APC AP7532 Manual

APC bryter AP7532

Læs nedenfor 📖 manual på dansk for APC AP7532 (1 sider) i kategorien bryter. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

*990-2395*

990-2395 05/2005

Addendum — Rack PDU

Circuit Breaker Operation

How to reset a mid-tripped circuit breaker

The circuit breaker is at a mid-trip state when the

actuator is partially extended from the circuit

breaker, but not fully extended, as if it had been

turned off manually. Pushing the actuator in while

in mid-trip state will not reset the breaker. The

circuit breaker needs to be fully extended before it

can be reset. To fully extend the circuit breaker:

1. Insert a small slotted screwdriver or other tool

into the hole located above the word “OFF”.

2. Push the lower part of the actuator in gently

until the upper part “clicks” out.

How to reset a circuit breaker

The circuit breaker is ready to be reset when the

actuator is fully extended. Quickly and forcefully

push the circuit breaker actuator into the PDU to

reset the breaker.

pdu0346a

Note

Before resetting the circuit breaker you

should determine the cause of the fault

and remedy the fault before resetting

the circuit breaker. If the fault is not

removed, the breaker will trip again as

soon as it is reset.

pdu0345a

Produkt Specifikationer

Mærke:	APC
Kategori:	bryter
Model:	AP7532
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Vægt:	5570 g
Produktfarve:	Sort
Opbevaringstemperatur (T-T):	-25 - 65 °C
Relativ luftfugtighed ved drift (H-H):	0 - 95 %
Relativ luftfugtighed ved opbevaring (H-H):	0 - 95 %
Driftstemperatur (T-T):	0 - 40 °C
Certificering:	cUL, CSA C22.2 No. 60950-1-03, UL 60950-1, UL
Kabellængde:	3.05 m
Input forbindertype:	NEMA L5-30P
Nominel udgangsspænding:	120 V
Nominel indgangsspænding:	120 V
Load-kapacitet:	2880 VA
Maksimal strømtræk pr. fase:	24 A
Maksimal input strøm pr. fase:	30 A
Output-forbindere:	(24) NEMA 5-20R