Argon 6355FS Manual

Argon Højttaler 6355FS

Læs nedenfor 📖 manual på dansk for Argon 6355FS (2 sider) i kategorien Højttaler. Denne guide var nyttig for 61 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
w w w . a r g o n a u d i o . c o m 1
Quick start
63xx series Quick start Guide
(Argon Audio 6340, 6350, 6344C, 6344FS and 6355FS)
We care about the Environment
By refraining from inserting a full printed manual with our
Argon Audio products we save more than 20 tons of paper
each year. You can find full product information for this
product on; www.argonaudio.com
S peaker positioning
The Speakers are best used with the tweeters
approximately at ear level when seated. Variations in
placement of your Speakers can produce dramatic
differences in the way music sounds. No listening rooms are
the same and therefore we encourage you to spend some
time experimenting with which placements work best in your
listening room. Trust your ears and be willing to experiment
freely. You can start with our basic recommendations.
Please try to ensure that the rooms surroundings of each
S peaker left and right are similar in acoustic character.
For example, if one Speaker is placed on bare walls while
the other is placed close to soft and curtains, furniture’s
both the overall sound quality and the stereo image are
likely to be compromised. Because bookshelves are usually
located close to the wall, placement on bookshelves will
often provide a richer, more bodied sound. In other full-
words; you will get more Bass. e other hand, if you On th
place the Speakers free You will get less Bass but -standing
a clearer sound. kers should be To begin with, the Spea
positioned between 1.5m and 3m apart at two corners of an
equilateral triangle completed by the listening area at the
third corner. See fig. 1
Home Theatre Systems
Argon Audio 63xx series speakers can be used as front
channels in a surround sound home theatre system.
Positioning the front Speakers within approximately 1metre
of the sides of your TV will create the best sound image in
scale with the visual image. The Speakers’ height should
ideally be between the centre and top of the screen. If the
Speakers are to be used for reproducing the surround
channels in a multi channel home theatre system, we
suggest you place them as illustrated in Figures 2 to 4
depending on the number of channels.
Connecting your loudspeakers
We recommend that you read the manual of your amplifier
or peakers. -AV receiver carefully before connecting your S
Please switch off all equipment when connecting your
S . peakers The binding posts on the terminal accepts wire
up to Ø 4mm or cables with banana plugs. that Make sure
positive peaker terminal binding posts on the S (marked +
and colored red) are connected to the positive output
terminal binding posts on the amplifier and that the negative
terminals on the Speaker (marked black) are – and colored
connected to the negative output terminal on the amplifier.
See fig 5.
You are now ready to enjoy your Argon Audio Speakers…!
Running-in period
We recommend a running-in time of your Argon Audio
S - peakers of approximately 15 20 hours at normal listening
level before you decide on the final positioning of the
S -peakers. During the running in time the drive units will
settle in and perform as intended.


Produkt Specifikationer

Mærke: Argon
Kategori: Højttaler
Model: 6355FS

Har du brug for hjælp?

Hvis du har brug for hjælp til Argon 6355FS stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler Argon Manualer

Højttaler Manualer

Nyeste Højttaler Manualer

JL Audio

JL Audio C2-650 Manual

16 November 2024
ELAC

ELAC 4 Pi PLUS.2 Manual

16 November 2024
Genelec

Genelec 8381A Manual

15 November 2024
RCF

RCF HD 10-A MK5 Manual

15 November 2024
Genesis

Genesis Helium 800BT Manual

15 November 2024
Genesis

Genesis Helium 600 Manual

15 November 2024
Lexon

Lexon Terrace Manual

15 November 2024
PreSonus

PreSonus Eris 8 Manual

15 November 2024