Argox AI-6821 Manual


Læs nedenfor 📖 manual på dansk for Argox AI-6821 (138 sider) i kategorien Stregkodelæser. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/138
AI- /AI-6821HD6821
Scanner2D
User Guide
ii
Regulatory Compliance
FEDERAL COMMUNICATIONS COMMISSION
INTERFERENCE STATEMENT
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protecon
against harmful interference in a residenal
installaon. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instrucons, may cause harmful interference to
radio communicaons. However, there is no
guarantee that interference will not occur in a
parcular installaon. If this equipment does
cause harmful interference to radio or television
recepon, which can be determined by turning
the equipment o and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
vi
Contents
1 Introducon ..........................................................1
1.1 Unpacking .......................................................2
1.2 Understand your scanner ................................ 4
1.2.1 Scanner ..................................................... 4
1.2.2 Cradle ........................................................ 5
1.3 Indicators ......................................................... 6
1.3.1 Status lights ............................................... 6
1.3.2 Status sound ............................................. 7
1.3.3 Vibraon ................................................... 8
2 Get started ............................................................ 9
2.1 Installaon ....................................................... 9
2.1.1 Set up your scanner .................................. 9
2.1.2 How to scan ............................................ 11
2.1.3 Work with the ASCII table ....................... 12
2.1.4 Search your scanner ...............................12
2.2 Baery ........................................................... 12
2.2.1 Charge the baery .................................. 13
2.2.2 Replace the battery ................................. 13
2.3 Connecon .................................................... 16
2.3.1 Connect to your cradle again .................. 16
2.3.2 Connect to a Bluetooth adapter ............. 16
2.3.3 Connect to a mobile device .................... 20
Connect to an iOS device ........................ 20
Connect to an Android device ................23
3 Controls and sengs ........................................... 26
3.1 Data transmission .......................................... 26
3.1.1 Character length ..................................... 26
3.1.2 Name of the bar code type ..................... 27
vii
3.1.3 AIM symbology ID ................................... 27
3.1.4 Acknowledge meout ............................. 28
3.1.5 Prex and sux ......................................30
3.2 Volume and vibraon .................................... 31
3.2.1 Good scan beep duraon .......................31
3.2.2 Inquiry beep (cradle only) ....................... 33
3.2.3 Scan volume ............................................ 34
3.2.4 Vibraon ................................................. 36
3.2.5 Power on alert ........................................36
3.3 Operang mode ............................................ 37
3.3.1 Handcu mode ....................................... 37
3.3.2 Batch mode ............................................. 38
3.3.3 Sleep mode ............................................. 39
Time to sleep (cradle ) ............................39
Time to sleep (mobile device) ................. 40
Sleep paral ............................................ 40
3.3.4 Auto-sensing mode ................................. 41
3.4 Interface selecon (cradle only) .................... 41
3.4.1 HID seng .............................................. 42
Country (cradle only) .............................. 42
Caps Lock (cradle only) ...........................46
Funcon key (cradle only) ....................... 46
Alphanumeric keys (cradle only) ............. 47
3.4.2 -232 sengs RS .......................................49
Flow control (cradle only) ....................... 49
Response delay (cradle only) .................. 50
Baud (cradle only) ................................... 52
Parity check (cradle only) ........................ 52
3.5 Update rmware ........................................... 55
Install driver ............................................ 65
x
Appendix A. Test symbologies ..............................160
Appendix B. ASCII table ........................................ 163
Appendix C. Default setngs of bar codes ............ 164
Appendix D. Data entry bar codes ........................ 166
6
1.3 Indicators
1.3.1 Status lights
Status lights (LED) are helpful for checking
your scanner’s status Both your scanner and .
cradle have LEDs, and each of them have four
colors: blue, green, red and amber. The table
below shows the LED behavior and the status
it indicates.
Status
Scanner LED
Cradle LED
Scanner
Connected
Flash at 1-blue
second
intervals
Flash at 1-blue
second
intervals
Scanner
Disconnected
O
O
Good Scan
Flash green
once
Flash green
once
Cradle ACK
Timeout
Flash every red
0.5 second
unl meout
N/A
Firmware
Update
Flash amber
fast
Flash green
fast
Cradle Inquiry
N/A
Flash amber
slowly
Cradle Inquiry
and Charging
N/A
Flash ,amber
green and red
slowly
Charging
Solid red
Flash green
every second
Baery Full
O
Solid green
7
1.3.2 Status sound
In addion to status lights, your scanner and
your cradle make sounds to indicate the
status it is in.
Status
Scanner
Sound
Cradle Sound
Scanner
Connected
Sound 1
N/A
Scanner
Disconnected
Sound 2
N/A
Good Scan
A short beep
N/A
Cradle Inquiry
N/A
Beeps ve
mes at 1-
second intervals
Cradle ACK
Timeout
Beeps once in
low tone
A short beep
Baery Low
Three short
beeps (fast)
N/A
Memory Full
Sound 3
N/A
Programming
Two short
beeps
N/A
Interface
Ready
N/A
Sound 4
Power On
A long beep
A long beep
Reset
N/A
Sound 5
9
2 Get started
This chapter provides informaon about how
to install, connect and use your scanner to do
your work, and how to charge and replace
your baery.
2.1 Installation
This secon describes how to set up your
scanner.
2.1.1 Set up your scanner
1. Connect the USB or the RS-232 cable to
your cradle. Lay the cable into the notch
on the cradle edge.
18
4. In the Add Bluetooth Device Wizard
dialog box, select the My device is set up
and ready to be found check box, and
click .Next
5. If it detects your scanner, it shows
“AI6821:XXXXXXXXX” (X is your scanner’s
serial number) in the list. Click your
scanner, and click .Next


Produkt Specifikationer

Mærke: Argox
Kategori: Stregkodelæser
Model: AI-6821

Har du brug for hjælp?

Hvis du har brug for hjælp til Argox AI-6821 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Stregkodelæser Argox Manualer

Argox

Argox AS-8310 Manual

29 August 2024
Argox

Argox AR-3100 Manual

29 August 2024
Argox

Argox AI-6801 Manual

29 August 2024
Argox

Argox AS-8020CL Manual

29 August 2024
Argox

Argox AI-6821 Manual

28 August 2024
Argox

Argox AI-6821HD Manual

28 August 2024
Argox

Argox AS-8000 Manual

28 August 2024
Argox

Argox AS-8120 Manual

28 August 2024
Argox

Argox PT-90 Manual

28 August 2024
Argox

Argox AS-9600 Manual

28 August 2024

Stregkodelæser Manualer

Nyeste Stregkodelæser Manualer

Approx

Approx appLS25WS Manual

24 Marts 2025
Approx

Approx appLS24 Manual

24 Marts 2025
Cognex

Cognex DataMan 50 Manual

26 Februar 2025
Unitech

Unitech MS852N Manual

23 Februar 2025
Unitech

Unitech MS926 Manual

23 Februar 2025
Unitech

Unitech MS242 Manual

23 Februar 2025
Unitech

Unitech MS588 Manual

23 Februar 2025
Unitech

Unitech MS851 Manual

23 Februar 2025
Unitech

Unitech MS840P Manual

21 Februar 2025
Unitech

Unitech MS838B Manual

20 Februar 2025