Asaklitt 31-8541 Manual

Asaklitt Skridttællere 31-8541

Læs nedenfor 📖 manual på dansk for Asaklitt 31-8541 (10 sider) i kategorien Skridttællere. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/10
GREAT BRITAIN • CUSTOMER SERVICE
tel: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk
ENGLISH
1
2
3
4
Ver. 20150327
3D Pedometer
Art.no 31-8541-1, 31-8541-2
Please read theentire instruction manual before using theproduct
and then save it for future reference. We reserve theright
for any errors in text or images and any necessary changes
made to technicaldata. In theevent of technical problems or
other queries, please contact our Customer Services.
Product description
Alarm
If you have set acertain number of steps as atarget asymbol
will appear on theleft of thedisplay. Itshows you how close to
thetarget youare. Thesymbol starts to flash when you have
reached your target. Thedefault target value for steps is 5000.
Operating modes
Thepedometer has 6 modes, listed in thefollowingorder.
Browse thelist using the [ MODE ] button.
• Step counting: “Step”
• Distance: “Km”
• Calories burned: “Kcal”
• Exercisetime: “Min”
• Memory: “Total step”
• Reset: “Res”
Step counting (Step)
Thestandard operatingmode. “Step” appears on thedisplay.
Instep counting mode thedisplay shows thetotal number
of steps taken since midnight. All daily information is saved
in thedaily memory and is erased automatically at midnight.
Accumulated data is saved in thelong-term memory for 30days.
It is possible to see the daily statistics for the past 30 days.
1. Press [ MODE ] until you come to “Step” and “Days record”.
2. Go to the day you wish to view by pressing [ RES ].
3. Browse the data by pressing [ SET ].
Distance (Km)
Press [ MODE ] to enter thedistancemode. “Km” or “Mile”
will show on thedisplay. Thereading shown is thedistance
travelled since midnight.
Calories burned (Kcal)
Press [ MODE ] to enter thecalories burnedmode. “Kcal” is
shown on thedisplay. Thereading shown is thenumber of
calories burned since midnight.
Exercise time (Min)
Press [ MODE ] to enter theExercise timemode. “Min” will
show on thedisplay. Thereading displayed is thetotal
distance you have walked/run since midnight.
Memory (Total step)
Press [ MODE ] to enter thememorymode. “Total step”
appears on thedisplay. Thereading displayed shows thetotal
accumulated data since thepedometer was lastreset.
Press [ SET ] repeatedly to retrieve thetotal data as follows:
Stepcounting/distance/calories burned/exercisetime.
Reset (Res)
There are 2 different kinds of resets: Daily reset and total reset.
• To perform a daily reset, press and hold in [ RES ] for
2 seconds whilst the pedometer is in “Step” mode.
The daily data is reset.
• To perform a total reset, press and hold in [ RES ] for
2 seconds whilst the pedometer is in “Total step” mode,
this resets all data.
Note: Allcategories are deleted by areset. Itis not possible
to reset just one singleday.
Battery replacement
1. Unscrew theretaining screw and
remove thebatterycover.
2. Remove theold CR2032 battery
and insert anewone.
3. Refit thebattery cover and tighten
theretainingscrew.
Care and maintenance
Clean theproduct by wiping it with asoft, damp cloth when
needed. Neveruse solvents or abrasive cleaning agents.
Disposal
This product should be disposed of in accordance with local
regulations. Ifyou are unsure how to proceed, contact your
local council.
Specifications
Stepcount 0–99999
Distance 0–999.999km
Time format 12/24hours
Battery CR2032
Weightrange 20–150kg
Stride length 30–180cm
Size 75×35×10mm
1. [ MODE ] Scrolls through themenu
2. [ SET ] Settings
3. [ RES ] Resets dailydata
4. [ RESET ] Resets to factory settings
Operating instructions
[ SET ]
Make settings for 12/24 clock format, seconds, hours,
minutes, date, units of measurement, stride length, weight
and target:
1. Press and hold in [ SET ] for 2 seconds to enter clock
setmode. “Adj” will begin flashing on thedisplay.
2. Increase values using [ RES ] and decrease values using
[ MODE ].
3. Confirm with [ SET ]. Repeat to make other settings such
as thedate, units of measurement,etc.

Produkt Specifikationer

Mærke: Asaklitt
Kategori: Skridttællere
Model: 31-8541

Har du brug for hjælp?

Hvis du har brug for hjælp til Asaklitt 31-8541 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Skridttællere Asaklitt Manualer

Asaklitt

Asaklitt 31-8541 Manual

8 Juli 2024

Skridttællere Manualer

Nyeste Skridttællere Manualer

Dexford

Dexford PE 300 Manual

14 Oktober 2024
Brunton

Brunton PED 1202 Manual

14 Juli 2024
Dexford

Dexford PE 226 Manual

11 Juli 2024
Conrad

Conrad PDG001 Manual

8 Juli 2024
Biltema

Biltema 14-7501 Manual

5 Oktober 2022
Crivit

Crivit IAN 56018 Manual

5 Oktober 2022
Biltema

Biltema 14-750 Manual

5 Oktober 2022
Crivit

Crivit IAN 68547 Manual

5 Oktober 2022