AstralPool SENA Manual


Læs nedenfor 📖 manual på dansk for AstralPool SENA (100 sider) i kategorien Pomp. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/100
SENA MANU
SENA MANU
SENA MANU
SENA MANUAL
AL
AL
ALSENA MANUAL
MANUEL SENA
MANUEL SENA
MANUEL SENA
MANUEL SENA
MANUEL SENA
MANUAL
MANUAL
MANUAL
MANUAL SENA
SENA
SENA
SENA
MANUAL SENA
MANUALE
MANUALE
MANUALE
MANUALE SENA
SENA
SENA
SENA
MANUALE SENA
HANDBUCH SENA
HANDBUCH SENA
HANDBUCH SENA
HANDBUCH SENA
HANDBUCH SENA
MANUAL
MANUAL
MANUAL
MANUAL SENA
SENA
SENA
SENA
MANUAL SENA
SENA ΕΓΧΕΙΡΙΔΙΟ ΕΓΚΑ
SENA ΕΓΧΕΙΡΙΔΙΟ ΕΓΚΑ
SENA ΕΓΧΕΙΡΙΔΙΟ ΕΓΚΑ
SENA ΕΓΧΕΙΡΙΔΙΟ ΕΓΚΑΤ
Τ
Τ
ΤΑΣΤ
ΑΣΤ
ΑΣΤ
ΑΣΤΑΣΗΣ
ΑΣΗΣ
ΑΣΗΣ
ΑΣΗΣ
SENA ΕΓΧΕΙΡΙΔΙΟ ΕΓΚΑΤΑΣΤΑΣΗΣ
ORIGINAL INSTRUC
ORIGINAL INSTRUC
ORIGINAL INSTRUC
ORIGINAL INSTRUCTIONS
TIONS
TIONS
TIONS
ORIGINAL INSTRUCTIONS
INSTRUCTI
INSTRUCTI
INSTRUCTI
INSTRUCTIONS D‘ORIGINE
ONS D‘ORIGINE
ONS D‘ORIGINE
ONS D‘ORIGINE
INSTRUCTIONS D‘ORIGINE
INSTRUCCIONE
INSTRUCCIONE
INSTRUCCIONE
INSTRUCCIONES ORIGINALE
S ORIGINALE
S ORIGINALE
S ORIGINALES
S
S
S
INSTRUCCIONES ORIGINALES
ISTRUZIONI O
ISTRUZIONI O
ISTRUZIONI O
ISTRUZIONI ORIGINALI
RIGINALI
RIGINALI
RIGINALI
ISTRUZIONI ORIGINALI
ORIGINAL ANLEITUNG
ORIGINAL ANLEITUNG
ORIGINAL ANLEITUNG
ORIGINAL ANLEITUNG
ORIGINAL ANLEITUNG
INSTRUÇÔES O
INSTRUÇÔES O
INSTRUÇÔES O
INSTRUÇÔES ORIGINAIS
RIGINAIS
RIGINAIS
RIGINAIS
INSTRUÇÔES ORIGINAIS
ΑΥΘΕΝΤΙΚΕΣ ΟΔΗΓΙΕΣ
ΑΥΘΕΝΤΙΚΕΣ ΟΔΗΓΙΕΣ
ΑΥΘΕΝΤΙΚΕΣ ΟΔΗΓΙΕΣ
ΑΥΘΕΝΤΙΚΕΣ ΟΔΗΓΙΕΣ
ΑΥΘΕΝΤΙΚΕΣ ΟΔΗΓΙΕΣ
 
SWIMMING POOL PUMPS
POMPES POUR PISCINES
BOMBAS PARA PISCINAS
POMPA PER PISCINAS
PUMPEN FÜR SCHWIMMBECKEN
BOMBAS PARA PISCINAS
ΑΝΤΛΙΕΣ ΠΙΣΙΝΑΣ
 
  SENA
SENA
SENA
SENASENA
Installation and general maintenance manual - POOL PUMPS
4
ENGLISH
1. GENERAL SAFETY INSTRUCTIONS
These symbols ( ) indicate the possibility of danger where the corresponding instructions
are not followed.
DANGER. Risk of electrocution.
Failure to abide by these instructions may lead to the risk of electrocution.
DANGER.
Failure to abide by these instructions may lead to the risk of injury to people or damage to
property.
WARNING.
Failure to abide by these instructions may lead to the risk of damage to the pump or the
installation.
The pump can not be installed in the Zone 0 and Zone 1. To see drawings
refer to page 87.
The pump is intended to be used while fastened to a support or while secured
in a specic location.
See the maximum total head, in metres in page 100.
A sump with an adequate outlet for the liquid is considered to be placed
where ooding is likely to occur.
If a self-priming pump is to be tted above the water level, the pressure
dierential to the pump suction pipe should not be higher than 0.02 MPa
(2 mH2O). Ensure that the suction pipe is as short as possible as a longer pipe
would increase suction time and the installation’s load losses.
The unit should be connected to an alternating current supply (see data on the
pump’s plate) with an earth connection, protected by a residual current device
(RCD) with a rated residual operating current that does not exceed 30 mA.
Seethetotal head, in metres, inthebackcoverofthespecicmanualforeach
pumprange
Installation and general maintenance manual - POOL PUMPS 5
ENGLISH
2. GENERAL SAFETY REGULATIONS
GENERAL
- Install the pump units in line with the specic instructions for each installation.
- Respect current regulations regarding accident prevention.
- All modications to the pump require prior authorization from the manufacturer. Original
spare parts and accessories authorized by the manufacturer ensure greater safety. The pump
manufacturer is exempt from all liability regarding any damage caused by unauthorized spare
parts or accessories.
- When working on each unit or others connected to them, disconnect the unit from the power
supply and the start-up devices, as the electrical parts of the pump are live during operation.
- To guarantee safety when operating the machine, you must comply with the installation and
service instructions.
- In the event of defective operation or faults, contact your supplier or nearest dealer.
WARNINGS DURING INSTALLATION AND ASSEMBLY WORK
- In cases of junction box connections only: when connecting the electrical wiring to the
motor, check the layout inside the connection box and make sure there are no pieces of
wiring inside after it has been closed and that the grounding conductor is correctly con-
nected. Connect the motor in line with the wiring diagram attached to the machine.
- In cases of junction box connections only: make sure that the electrical wiring connections
to the terminal box are well mounted and screwed tightly to the connection terminals.
- Ensure the seal of the motor’s junction box is properly tted to prevent water getting in.
Likewise, position and tighten the gland inside the cable duct of the junction box.
-Make sure that water is unable to enter the motor or the live electrical parts.
- Where the intended use is not as indicated, additional technical adaptations and regulations
may apply.
WARNINGS DURING START-UP
- Before starting the machine, check the calibration of the electric protection devices on the
motor and that the protection against electrical and mechanical contacts is correctly posi-
tioned and secure.
Installation and general maintenance manual - POOL PUMPS 11
ENGLISH
7. TROUBLESHOOTING
1. The pump is not primed 4. The pump will not start
2. The pump only releases a small ow of water 5. The motor is making a noise but will not start
3. The pump makes a noise 6. The motor has stopped
1 2 3 4 5 6 CAUSES SOLUTIONS
Air entering the suction pipe Check the condition of connections
and seals on the suction pipe
Filter cap badly sealed Clean the lter cap and check the
condition of the rubber seal
Motor turning in wrong direction Invert 2 power phases
Wrong voltage Check the voltage on the rating
plate and that of the mains
Pre-lter blocked Clean the lter
Load loss in the installation Prevent parts from causing load loss
wherever possible
Pump incorrectly secured Secure the pump correctly
Motor blocked Remove the motor and contact the
technical service
Increased temperature in the
terminal box due to electric arc
Check the junction box connections
The thermal protection trips Connect the cables correctly to the
junction boxes
Incorrect junction box connections Tighten the cable correctly to the
junction box / Adapt the size of the
cable connection to the junction box


Produkt Specifikationer

Mærke: AstralPool
Kategori: Pomp
Model: SENA

Har du brug for hjælp?

Hvis du har brug for hjælp til AstralPool SENA stil et spørgsmål nedenfor, og andre brugere vil svare dig




Pomp AstralPool Manualer

AstralPool

AstralPool CTX 400 Manual

29 December 2024
AstralPool

AstralPool KIVU Manual

29 December 2024
AstralPool

AstralPool CTX 500 Manual

29 December 2024
AstralPool

AstralPool FX Manual

29 December 2024
AstralPool

AstralPool CTX 280 Manual

29 December 2024
AstralPool

AstralPool Eco Range Manual

15 December 2024
AstralPool

AstralPool CTX 360 Manual

18 August 2024

Pomp Manualer

Nyeste Pomp Manualer