Audac NELO706V Manual

Audac Højttaler NELO706V

Læs nedenfor 📖 manual på dansk for Audac NELO706V (2 sider) i kategorien Højttaler. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
INSTALLATION MANUAL
NELO706V SERIES SURFACE MOUNT SPEAKERS
STEP 1
STEP 2
The NELO706V series speakers are delivered assembled.
For installation, both parts (speaker part and wall part) needs to be
taken apart. This is done through releasing both screws (top and
bottom) of the speaker, and removing both parts from each other.
The wall part has to be assembled to the provided location on the
wall or ceiling. This is done through knocking out the provided areas
(teardrop holes) for the fasteners. Choose the fasteners depending on
the mounting surface (concrete, wooden, steel, ...) The distance between
both mounting positions is 130 mm.
Also make sure the connection cables are provided through the
designated openings (grommets) for connecting the speaker accordingly.
STEP 3
Connect the wires coming from the amplier to the SnapConnect™ on
the rear speaker part.
The correct power tapping is chosen by connecting the appropriate
terminals of the connector. A description of the power tap selection
is shown on the magnet sticker on the rear side of the loudspeaker.
NELO706V:
White: 833 Ω - 70V/6W
Red: 1667 Ω - 100V/6W - 70V/3W
Blue: 3333 Ω - 100V/3W - 70V/1.5W
Black: COM
STEP 4
Assemble both speaker and wall part again through joining both parts
together. Make sure the speaker part is in the right direction to make
sure it can easily slide into position. Once positioned, insert both screws
again to tighten both parts together.
The speaker is now ready for use.
STEP 5
The NELO706V includes two knobs for volume adjustment. The
protruding knob is assembled by default and allows easy adjustment
by hand. This is recommended for frequent volume changes. A second
ush knob with screwdriver notch is included and recommended
for permanent settings, or when rare and non user congurable
adjustments are required.
The included knobs can be exchanged and easily replaced by just
pulling from the shaft and assembling (by pressing) the replacement
part on this position.


Produkt Specifikationer

Mærke: Audac
Kategori: Højttaler
Model: NELO706V

Har du brug for hjælp?

Hvis du har brug for hjælp til Audac NELO706V stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler Audac Manualer

Audac

Audac CIRA724I Manual

17 December 2024
Audac

Audac ATEO6M Manual

17 December 2024
Audac

Audac WS500 Manual

6 Oktober 2024
Audac

Audac ATEO4 Manual

4 Oktober 2024
Audac

Audac MERO6 Manual

2 Oktober 2024
Audac

Audac MERO2D Manual

1 Oktober 2024
Audac

Audac CENA710D Manual

27 September 2024
Audac

Audac CIRA724 Manual

27 September 2024
Audac

Audac CIRA730D Manual

27 September 2024
Audac

Audac CENA306 Manual

27 September 2024

Højttaler Manualer

Nyeste Højttaler Manualer