Audio-Technica BPHS2C Manual

Audio-Technica Headset BPHS2C

Læs nedenfor 📖 manual på dansk for Audio-Technica BPHS2C (1 sider) i kategorien Headset. Denne guide var nyttig for 52 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

BPHS2/BPHS2C/BPHS2S Specifications

For product improvement, the product is subject to modification without notice.

* During a wired connection with the product. Performance varies depending on the device used.

• 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL

* During a wired connection with the product. Performance varies depending on the device used.

• 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL

Specifications (Headphones)

Specifications (Microphone)

BPHS2/BPHS2S

Polar pattern Polar pattern

Frequency response Frequency response

BPHS2C

ver.1 2018.09.01

150°

180°

210°

120°240°

270°

300°

330°

60°

30°

0°

90°

120°

150°

180°

210°

240°

270°

300°

330°

60°

30°

0°

10dB

50 20k

(Hz)

10k5k2k1k500200100

10dB

50 20k

(Hz)

10k5k2k1k500200100

Frequency (Hz) Frequency (Hz)

Response (dB)

Type Closed-back dynamic

Driver 45 mm

Sensitivity 102 dB/mW

Frequency response 15 to 28,000 Hz

Maximum output 1,600 mW

Impedance 38 ohms (312 ohms when limiter switch is on)

Input jack TB6M jack

Weight (without cable) BPHS2: 250 g (8.8 oz), BPHS2C: 240 g (8.5 oz), BPHS2S: 190 g (6.7 oz)

Accessories Windscreen x 3, clip, pouch

Replacements/separately sold items BPCB2 (3.0 m (9.8’) / TA6F, 3-pin XLRM, plug), BPCB3 (3.0 m (9.8’) / TA6F, unterminated), Earpad HP-M60x,Head pad

Element Dynamic

Polar pattern Hypercardioid

Frequency response* 50 to 14,000 Hz (at 2 cm (0.79”))

Sensitivity* –57 dB (1.4 mV) (0 dB = 1 V/Pa, 1 kHz)

Impedance 550 ohms

Dimensions Height: 18.0 mm (0.71”),

Main unit maximum diameter: 23.4 mm (0.92”)

Output connector TB6M

Element Back electret condenser

Polar pattern Cardioid

Frequency response* 60 to 15,000 Hz (at 2 cm (0.79”))

Sensitivity* –45 dB (5.6 mV) (0 dB = 1 V/Pa, 1 kHz)

Impedance 100 ohms

Maximum input sound

pressure level*

140 dB SPL (1 kHz THD1%)

Signal-to-noise ratio* 60 dB (1 kHz at 1 Pa, A-weighted)

Dynamic range 106 dB (1 kHz at Max S.P.L.)

Phantom power

requirements

11 to 52V DC, 2 mA

Dimensions Minimum width: 12 mm (0.47”), Height: 12.7 mm (0.5”)

Output connector TB6M

Legend

200Hz

1kHz

5kHz

Scale is 5 decibels

per division

Legend

200Hz

1kHz

5kHz

Scale is 5 decibels

per division

Legend 0°, 2 cm Legend 0°, 2 cm

BPHS2 BPHS2C BPHS2S

Produkt Specifikationer

Mærke:	Audio-Technica
Kategori:	Headset
Model:	BPHS2C
Vægt:	264 g
Produktfarve:	Sort
Produkttype:	Headset
Anbefalet brug:	Spil
Impedens:	65 ohm (Ω)
Forbindelsesteknologi:	Ledningsført
Produkter pr. palle:	1 stk
Kabellængde:	2 m
Bæremåde:	Headset
Headset type:	Binaural
Hovedtelefon frekvens:	20 - 20000 Hz
Hovedtelefon følsomhed:	100 dB
Driverenhed:	40 mm
Plug and play:	Ja
Mikrofonindgangsimpedans:	560 ohm (Ω)
Mikrofon frekvens:	40 - 20000 Hz
Ørekobling:	Circumaural
Magnet-type:	Neodym
Akustisk system:	Lukket
Stikforbindelse kontakter plettering:	Kobber