Audio-Technica ES945 Manual

Audio-Technica Telefon ES945

Læs nedenfor 📖 manual på dansk for Audio-Technica ES945 (2 sider) i kategorien Telefon. Denne guide var nyttig for 47 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
OMNIDIRECTIONAL CONDENSER BOUNDARY MICROPHONE
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
0°
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Optional Accessories:
AT8506 four-channel 48V phantom
power supply (AC powered).
AT8668 quick-mount plug-in micro-
phone desk stand.
AT8801/EU single-channel 48V
phantom power supply (AC pow-
ered).
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
FORM No. ATGC-L0105-07-E
Machida • Tokyo • Japan
SPECIFICATIONS
ELEMENT Fixed-charge back plate
permanently polarized condenser
POLAR PATTERN Omnidirectional
FREQUENCY RESPONSE 40-18,000 Hz
OPEN CIRCUIT SENSITIVITY -42 dB (7.9 mV) re 1V at 1 Pa
IMPEDANCE 200 ohms
MAXIMUM INPUT SOUND LEVEL 142 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 112 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 64 dB, 1 kHz at 1Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
WEIGHT 63 g
DIMENSIONS 28.0 mm - diameter,
69.0 mm - length
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED One pair isolators
T h e E S 9 4 5 i s a w i d e- r a ng e
condenser microphone with an
omnidi re ct io na l pol ar pattern.
It is desig ned for u nob trus ive
table, ceiling or panel-mounted
applications for high-quality sound
reinforcement, teleconferencing,
professional recording, television
a nd oth e r d e m an d ing s ou n d
pickup applications.
Th e ES9 4 5 is e qui pp e d wi th
U n i G u a r d ® R F I - s h i e l d i n g
t e c h n o l o g y , w h i c h o f f e r s
outstand ing rejection o f radi o
frequency interference (RFI). The
microphone is RoHS compliant –
free from all substances specied
in the EU directive on hazardous
substances.
The microphone should be placed on a at, unobstructed mounting
surface. The smalldiameter capsule near the boundary eliminates
phase distortion and delivers clear, high-output performance.
The microphone requires 11V to 52V phantom power for operation.
The microphone is enclosed in a heavy-duty die-cast case and
protected by a two-layer steel mesh grille. The low-profile housing
has a low-reectance black nish. The microphone is also available
in white as the ES945W (shown above). Isolators are included with
the microphone for optional mechanical isolation from the mounting
surface.
Output is low impedance balanced. The balanced signal appears
across Pins 2 and 3, while the ground (shield) connection is Pin 1.
Output is phased so that positive acoustic pressure produces positive
voltage at Pin 2 in accordance with industry convention.
To mount the ES945 in a ceiling or table top without the isolators,
a 20.5 mm diameter hole is required. To mount the ES945 with the
isolators, a 23.5 mm hole is required. Place the isolators on either
side of the hole to achieve mechanical isolation from the mounting
surface.
The microphone shall be a xed-charge condenser designed for use
in table, ceiling or panel-mount boundary applications. It shall have
a frequency response of 40 Hz to 18,000 Hz and an omnidirectional
polar pattern. It shall have a self-contained power module and shall
operate from an external 11V to 52V DC phantom power source.
It shall offer outstanding rejection of radio frequency interference
(RFI). It shall be capable of handling sound input levels up to 142 dB
with a dynamic range of 112 dB. Nominal open circuit output voltage
shall be 7.9 mV at 1 kHz, 1 Pascal. Output shall be low impedance
balanced (200 ohms) from an integral 3-pin XLRM-type connector.
The microphone shall have a maximum diameter of 28.0 mm and an
overall length of 69.0 mm. Weight shall be 63 grams. The microphone
shall be housed in an all-metal case with a two-layer steel mesh
grille. Finish shall be low reectance black [white]. Resilient isolators
shall be provided for reduction of mechanical noise transfer from the
mounting panel.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 43°C for extended periods. Extremely high
humidity should also be avoided.

Produkt Specifikationer

Mærke: Audio-Technica
Kategori: Telefon
Model: ES945

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica ES945 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Telefon Audio-Technica Manualer

Audio-Technica

Audio-Technica ES945 Manual

29 Oktober 2022

Telefon Manualer

Nyeste Telefon Manualer

Panasonic

Panasonic VE-GE10DW Manual

21 December 2024
Panasonic

Panasonic KX-TGC252 Manual

21 December 2024
Huawei

Huawei P60 Manual

21 December 2024
Philips

Philips D260 Manual

21 December 2024
HTC

HTC Desire 19+ Manual

15 December 2024
Ranex

Ranex RX 6031 Manual

15 December 2024
Vtech

Vtech DS6611-2 Manual

14 December 2024
Vtech

Vtech DS6771-3 Manual

14 December 2024
Vtech

Vtech DS6161 Manual

14 December 2024
Vtech

Vtech DS6621-2 Manual

14 December 2024