Avantree BTTC-500-W Manual

Avantree Ikke kategoriseret BTTC-500-W

Læs nedenfor 📖 manual på dansk for Avantree BTTC-500-W (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 17 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

Contents

1. Features & AptX low latency

2. Package Contents

3. Product Overview & Control Functions

4. LED indications

5. Use as a Transmitter (TX mode)

6. Use as a Receiver (RX mode)

7. Bypass mode (Non-Bluetooth)

8. Pair and Connect two Devices Simultaneously

9. Restore Factory Default Settings

10. Product Specifications

11. Troubleshooting

12. Warnnings

1. Features & AptX low latency

Avantree Oasis is a wireless long range audio transmitter & receiver incorporating the

latest “AptX low-latency” technology for CD-like quality sound with virtually no delay.

Multifunctional, supporting optical, bypass and voice prompts. Providing the best

solution to enable your TV or home audio system to wirelessly stream hi-fi audio

directly to any wireless headphones or speakers.

2. Package Contents:

A. Avantree Oasis (BTTC-500)

B. Power adapter

C. USB charging cable

D. Optical cable

E. 3.5mm audio cable

F. 3.5mm female to RCA male cable

G. User manual & Quick user guide

3. Product Overview & Control Functions

5. Use as a transmitter (TX mode)

1) Connect audio source (TV, DVD etc.) to Oasis "TX Input" port with the audio

cables provided (optical or AUX/RCA).

2) Connect Oasis to a power source (TV, PC USB socket or power adapter) with a

USB cable.

3) Slide TX/RX switch to the "TX" position.

4) Slide Power/Mode switch to the "Bluetooth" position.

5) Select the correct audio input mode (AUX/OPT) by short pressing the

button (Very Important)

6) Pairing - Pair Oasis with your Bluetooth-enabled headsets/speakers.

• Set Oasis into pairing mode, TX LED flash GREEN / WHITE alternately fast.

– First-time use: Oasis will auto enter pairing mode (with clear memory).

– Afterward: press button for 3 seconds.

• Set your headsets/speakers to pairing mode refer to its user manual.

• Wait until connected (For quick pairing, better keep them within 1 meter when

pairing)

6. Use as a Receiver (RX mode)

1) Connect your speaker to Oasis "RX Output" port with the audio cable provided

(optical or AUX/RCA).

2) Connect Oasis to a power source with USB cable and adapter.

3) Slide TX/RX switch to the "RX" position.

4) Slide Power/Mode switch to the "Bluetooth" position.

5) Select the correct audio input mode (AUX/OPT) by short pressing the

button (Very Important)

6) - Pair Oasis with your Bluetooth-enabled phone/PC/tablet.Pairing

• Set Oasis into pairing mode, RX LED flash GREEN / WHITE alternately fast.

– First-time use: Oasis will auto enter pairing mode (with clear memory).

– Afterward: press button for 3 seconds to enter.

Active Bluetooth on your phone or another device to find “Avantree Oasis” to •

connect.

Wait and connected (For quick pairing, better keep them within 1 meter when •

pairing).

8. Pair and Connect two Devices Simultaneously

In TX mode

1) Pair with the first device by following the previous instructions in the “Use as a

Transmitter (TX mode)” section.

2) Pair with the second device

• Set second headphones/speaker to pairing mode.

• Set Oasis to pairing mode again, press the button for 3s until the TX LED

flashes GREEN and WHITE.

• Wait until connected. Once Oasis connected to two devices, you will see LEDs

A and B both illuminated.

Notes:

1) For improved compatibility and sound quality, we suggest that you use

Bluetooth devices with CSR chipset, e.g. Avantree Audition Pro, Plantronics

backbeat pro, etc.

2) When using dual-link, Oasis doesn’t support aptX low latency.

In RX mode

1) Pair with the first device by following the previous instructions in the “Use as a

Receiver (RX mode)” section.

2) Pair with the second device

• Set Oasis to pairing mode again, press the button for 3s until the RX LED

flashes GREEN and WHITE.

• Active Bluetooth on the second device to find “Avantree Oasis” to connect.

• Wait until connected. Once Oasis connected the two devices, you will see LEDs

A and B both illuminated.

Note: Only one device can play music at any time. You must stop the music on one

device to play on the other.

9. Restore Factory Default Settings

You may need to reset Oasis if it is not working as expected. When Oasis is reset to

factory default settings, all the paired device information will be cleared.

1) Slide Power/Mode switch to the “Bluetooth position”.

2) Make sure Oasis is not connected to any Bluetooth devices – LEDs A and B should

both be off.

3) Press and hold the and buttons together until you hear voice prompt

“pairing history cleared”.

- 5 -

To take advantage of the better performance of the APTX Low Latency Codec,

the other side device must support the same codec. If the other side device only

supports the normal AptX codec, or the SBC one, those codecs will be used instead.

Audio delay when paired with different headphones/receiver-

Headphones/receiver support - The audio delay will be

aptX Low Latency codec 40ms~

aptX codec 70ms~

SBC codec (most standard Bluetooth audio) 220ms~

- 3 -

- 8 - - 9 - - 10 -

- 4 -

- 1 -

- 6 -

- 2 -

- 12 - - 13 - - 14 -

- 16 - - 17 -

Dispose of the packaging and

this product in accordance with

the latest provisions.

- 18 -

11. Troubleshooting

1) I am having trouble pairing and connecting to my Bluetooth device.

Please check the following:

1. Your wireless device supports the wireless profiles listed in the specifications.

2. Oasis and your device are next to each other or within 3 feet / 1 meter.

3. Make sure both Oasis and the wireless device are in pairing mode.

2) After connecting and pairing with my wireless device, I cannot hear any music

from my sound system.

1. Make sure you select the correct audio input mode (AUX/OPT) by short

pressing the button.

2. Make sure to remove the protective head on optical cable.

3. In Optical mode, Oasis support device with sampling rate under 48kHz.

12. Warnnings

Avantree Technology CO.,Ltd.

The 4th Floor, Yurpeng Building, NO.1019 Jiabin Rd, Luohu District, Shenzhen,

Guangdong, China.

This device complies with part 15 of the FCC Rules. Operation is subject to the

condition that this device does not cause harmful interference (1) this device may

not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.Changes or

modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

Z-PKMN-T500-V0

www.avantree.com

support@avantree.com

For a Beer Experience

Need help?

- FAQ：support.avantree.com

- Live chat: www.avantree.com (5:00 pm–1:00 am PST)

- Email: support@avantree.com

- for Oasis on Youtube.comVideo user guide

- Telephone support：+1 408 600 0579 (CET 8am-3pm)

+1 800 232 2078 (PST 9am-5pm)

+86 755 82285022 (CST 9am-6pm)

www.avantree.com

Oasis User Manual

Bluetooth Transmitter and Receiver 2-in-1

Avantree TC500

For a Beer Experience

Scan p1-me for warranty registration

C GD HF

Bypass

Bluetooth

TX AUX APTX

SBC A

OPT

Bypass

Bluetooth

TX AUX APTX

SBC A

OPT

Power / Mode

switch TX/RX switch

Status indicators

TX AUX APTX

SBC A

OPT

TX RX

4. LED indications

- 7 -

Indicator Status

In receiving mode

OPT Optical audio mode

AUX AUX audio mode

SBC Oasis is using SBC codec

APTX Oasis is using aptX codec

LL Oasis is using aptX low latency codec

A Oasis is using device A

B Oasis is using device B

Bypass mode

Flashes GREEN and WHITE alternately to indicate Oasis is in pairing mode

In transmitting mode

Button Function Operation

Power/

Mode switch

Slide to “ ” to turn off the device.Power off

Enter paring mode

AUX/ Optical switch

In AUX audio mode, short press once

(OPT mode doesn’t support).

Volume down/

Previous song

In AUX audio mode, short press once.

(OPT mode doesn’t support).

Slide to RX to enter receiving mode.

TX/RX

switch Receiver mode

Transmitter mode Slide to TX to enter transmitting mode.

Short press once.Reconnect

Slide to "Bluetooth" to power on & enter

Bluetooth mode.

Bluetooth mode

Bypass mode Slide to “Bypass” to power on & enter

Bypass mode.

Voice prompt on/off Hold for 3 seconds to switch Voice on/off.

Short press once to switch between

AUX (3.5mm) and Optical audio mode.

Details see next page.Indicate status

Status indicators

Hold this button for about 3 seconds.

www.a vantree.com

Oasi s User Manual

Wireless Transmitter and Receiver 2-1

Avantree T C500

For a Beer Experience

Scan p1-me for warr anty regis tr atio n

7. Bypass mode (Non-Bluetooth)

Bypassing means using Oasis as a non-Bluetooth device which connects the TV

and speaker via wires directly. This design enables you to switch between wired

(Bypass mode) and wireless (Bluetooth mode) with just one switch without the need

to disconnect any cables.

1) Connect audio source (TV, DVD etc.) to Oasis “TX Input" port with the audio

cables provided (optical or AUX/ RCA).

2) Connect your speaker to Oasis "RX Output" port with your own audio cable

(optical or AUX/RCA).

3) Connect Oasis to a power source with USB cable and adapter.

4) Slide the Power/Mode switch to the "Bypass" position.

5) Select the correct audio input/output mode (AUX/OPT) by short pressing

the button.

(Important Note: Bypass for AUX to AUX & OPT to OPT only).

6) Ready for use.

- 11 -

- 15 -

10. Product Specifications

• BT version: 4.1

• Supports profiles: A2DP, AVRCP

• Audio codec: AptX, AptX-LL, SBC

• Operational range: Class I, up to 50 meters

• Input voltage/ current: Micro USB DC5.0V 500mA

• Operating temperature:-10

C ~ 45°C

• Storage temperature: -20

°C ~ 60°C

• Support sampling rate in optical mode

: ≤48KHz

• Product size: 114×75×30mm

• Product weight: 90g

may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.If this equipment

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment

should be installed and operated with minimum distance between 20cm the radiator

your body: Use only the supplied antenna.

Volume up/

Next song

Produkt Specifikationer

Mærke:	Avantree
Kategori:	Ikke kategoriseret
Model:	BTTC-500-W
Bredde:	114 mm
Dybde:	75 mm
Højde:	30 mm
Vægt:	90 g
Antal pr. pakke:	1 stk
Brugervejledning:	Ja
Produktfarve:	Hvid
Kabler inkluderet:	Audio (3.5mm), RCA, USB
Bluetooth-version:	4.1
Bluetooth-profiler:	A2DP, AVRCP
LED-indikatorer:	Ja
Trådløs teknologi:	Bluetooth
Transmissionsafstand:	50 m