Avtex W152D Manual

Avtex LCD TV W152D

Læs nedenfor 📖 manual på dansk for Avtex W152D (58 sider) i kategorien LCD TV. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/58
TFT-LCD TV
READ CAREFULLY
BEFORE OPERATION
USER MANUAL
W152D
W152D
Before connecting the AC power cord to the DC adapter outlet ,make sure the
voltage designation of the LCD TV corresponds to the local electrical supply .
If you are unsure of your power supply , ask your local power company .
Never insert anything metallic into the cabinet openings of the LCD TV;
otherwise may cause the danger of electric shock.
To avoid electric shock, never touch the inside of the LCD TV / adapter.
Only a qualified technician should open the case of the LCD TV/adapter.
Never use your LCD TV/adapter when the power cord has been damaged .
Make sure there is nothing resting on the power cord, and keep the cord
away from places where people can trip over it .
Be sure to hold the plug, not the cord when disconnecting the adapter from
an electric socket.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
TO PREVENT ELECTRICAL SHOCK.
DO NOT REMOVE THIS COVER. NO
USER- SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol indicates
dangerous voltage
inside the product that
presents a risk of electric
shock or personal injury.
This symbol indicates
important instructions
accompanying the
product.
Please read this manual carefully before using this product.
IMPORTANT SAFETY INSTRUCTIONS
Openings in the LCD TV/adapter cabinet are provided for ventilation.
To prevent overheating, these openings should not be blocked or covered.
Also, avoid using the LCD TV on a bed ,sofa ,rug, or other soft surface. As
this, may block the ventilation openings in the bottom of the cabinet. If you
put the LCD TV in a bookcase or some other airless space, be sure to provide
adequate ventilation.
Do not expose the LCD TV to extreme temperature conditions or to extreme
humidity conditions.
The apparatus should not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, should be placed on the apparatus.
Do not clean the front with keton-type materials (e.g.Acetone ),ethyl alcohol,
toluene, ethy lacid, methyl, or chloride-these may damage the panel.
Locate your DC adapter near an easily accessible AC outlet.
If your LCD TV does not operate normally in particular, if there are any
unusual sounds or smells coming from it unplug it immediately and
contact an authorized dealer or service center.
High temperature can cause problems. Don t use your LCD TV in direct
sunlight, and keep it away from heaters, stoves, fireplaces, and other
sources of heat.
'
Unplug the DC adapter when it is going to be left unused for a long time .
To reduce the risk of fire or electric shock, and annoying interference, use the
recommended accessories only.
If the LCD TV is broken, do not try to repair it yourself. Contact qualified service
personnel.
Unplug your DC adapter from the AC outlet before any service.
Be sure the service technician uses authorized replacement parts or their equi-
valents. Unauthorized parts may cause fire, electrical shock, or other hazards.
Following any service or repair, be sure the service technician performs safety
checks to certify that your TFT-LCD TV is in a safe operating order.
The apparatus with CLASS I construction shall be connected to a MAINS
socket outlet with a protective earthing connection.
IMPORTANT SAFETY INSTRUCTIONS
CONTENT
AV, S CART and YPBPR SETUP
Video setting menu 17
VGA SETUP
Picture Sound
Monitor setup Function
18
20
19
21
EXTERNAL EQUIPMENT
Connecting diagram 4
LET'S START
Changing source operation 8
REMOTE CONTROL HANDSET
Remote buttons 5 Battery installation 7
TV MENU SETUP
Picture Sound
TV setup Function
9
11
12 14
PANEL BUTTON FUNCTIONS
Panel control 23
Rear panel
INSTALLATION
Normal installation 1
FM OPERATION
FM Sound
22 23
Function 23
TELETEXT FUNCTION
Teletext display
Mix mode
Page selection
Lock
Zoom in teletext 16
Index
Display mode 16 Colorized buttons 16
15
15
15
15
15
CONTENT
DISPLAY MODE
51
Display mode
SPECIFICATIONS
Specifications 50
TROUBLE SHOOTING
DVD troubleshooting 49
Display troubleshooting Sound and TV troubleshooting 48
48
DVD FUNCTION S ETUP
General setup 40
Video setup
43
Audio setup
Password setup
42
42
40
Preference setup
Usage of USB equipment 38
CARD READER AND USB OPERATION
Headphone enjoying 37
Fast playback
32 Repeat playback of selected segment 33
Zooming the displayed frame 35
34
MPEG4 and JPEG file playing 35
DVD OPERATION
Brief introduction to DVD24
Features 25
Compatible disc types 26
Volume control 27
Playback 27
Play/pause playback
28
Information 28 DVD menu playback 28
PBC playback
2930
Direct play 30
Memory 31
Repeat playback
31
Select language/audio 31
VCD, SVCD menu playback
Select track to play directly
by number buttons
33 Play from the desired position
DVB FUNCTION S ETUP
General setup 44
DVB-T setup
Video setup
45
44
Password setup 47
1, Hook the tache (labeled A)of the kickstand onto the plate (labeled C).
2, Tighten the screws ( M4 10) through the ostium (labeled B).
3, Figure shows the finished installation. The kickstand can rotate 15 -degree.
Kickstand
Ostium
Rear viewing of
LCD TV
1
1
1
INSTALLATION
NORMAL INSTALLATION
AB
M4 10
Screw 1pcs
C
Hook
10
25
2
PANEL BUTTON FUNCTIONS
Indicator( )Indicator is red when in standby mode, green when working normally.
1IR sensor window
2
Front panel
CH+/- (Increase or decrease channel number)
6
5
VOL+/-(Increase or decrease volume)
SOURCE (Enter to exit source menu)
7
4
SETUP (Enter or exit setup menu)
STANDBY (To switch between standby mode and power-on mode)
8
Left panel
11 USB 1 jack
9
Headphone jack
Right panel
14
13
Disc in/out door
16
(Stop button)
15
(Eject button)
(Play/puase button)
PANEL CONTROL
3
POWER(Turns on or off the power supply).
10USB 2 jack
1 2
3
4
5
6
7
8
9
14
13
10
11
12
12
MEDIA CARD socket
15
16
DVD or VCR player
RL
EXTERNAL EQUIPMENT
NOTE
CONNECTING DIAGRAM
You should connect all interconnecting cables BEFORE plugging in the power cord.
Power amplifier (with coaxial digital audio in)
PC IN
VGA AUDIO
COAXIAL
SCART
AV IN
VIDEO
Y
PB/CB
PR/CR
L
R
R cable
F
4
FM ANTENNA
23
456
789
1
0
W152D
SLEEP
SAVESCAN
REMOTE CONTROLLER
5
REMOTE BUTTONS
EJECT
1
Disc in/out in DVD mode.
Number button
5
To select program number.
OK button
9
To confirm the selections.
17 INDEX/PAGE+
To display main content page when playing the
teletext /Change to the program in next page in
DVB mode.
18 SUBPAGE/PAGE-
To display the subpage of the teletext/
Change to the program in previous
page in DVB mode.
19 REVEAL/EPG
Display the hidden teletext information
/ in DVB
mode
To display the program guide
.
20 ZOOM/CYAN
To zoom in and zoom out the picture
in DVD mode/CYAN button.
SETUP
11
Enter or exit setup menu.
DISC MENU
12
To go to the DVD main menu.
LANGUAGE/NICAM
To switch the output language in DVD/DVB
mode/Switch in NICAM,A2 and mono channel
(It is effective in TV signal input with NICAM
or A2 function).
14
15 CARD/DISC
Switches between the card reader, DVD and
USB mode(valid in DVD mode).
1
2
3
4
5
8
9
15
13
11
18
14
7
10
6
12
16
17
19
20
21
7
To set the sleep timer.
SLEEP
13CHANNEL+/-
To increase or decrease program number in
TV/DVB/FM mode.
To play normally or pause playing in DVD mode.
[ ] button
2
3
To fast-forwards DVD playback in DVD mode.
[ ] button
[ ] button
4
To select the next chapter or track in DVD mode.
10Left/Right cursor(menu adjustment )
To move leftward/ rightward or adjust the
selected item in the menu, or adjust sound
volume (invalid in DVD and DVB mode).
16 HOLD/INFO
To stop teletext on current page/To display the
language and sound track in DVD/DVB mode.
21 REPEAT/YELLOW
To repeat playback in DVD mode/
YELLOW button.
6RETURN
To exchange channel between the previous
program and the current program in TV/DVB/
FM mode.
8FAVORITE/Q-PLAY
Display your favorite channel list in DVB mode
/Play DVD directly in DVD mode.
23
456
789
1
0
W152D
SLEEP
SAVESCAN
6
REMOTE CONTROLLER
SOURCE
To select input source: TV, DVB, DVD, FM, AV,
SCART, YPBPR and VGA.
27
UP/DOWN cursor
To select upward/downward in the menu or
change the channel in TV/DVB mode.
28
To display TV and teletext in the same time
/Selects the subtitle language in DVD/DVB
mode.
MIX/SUBT
35
Volume +/-
31
To increase or decrease sound volume.
To play from a certain time point
in DVD mode/RED button.
GOTO/RED
38
23
22
24
25
27
28
29
26
TEXT/TEXT
34
To enable or disable the function of teletext.
A-B/GREEN
To segment repeat in DVD mode
/Green button.
39
DISPLAY
To display current source information.
29
38
31
30
32
STANDBY
22
To switch between standby mode and power-
on mode.
39
37
36
34
35
33
[ ] button
To fast backward playback in DVD mode.
23
26TWO-DIGIT NUMBER BUTTON
To switch between one or two-digit program
number.
24[ ] button
To select the previous chapter or track in DVD
mode.
MUTE
Sound mute switch.
30
SAVE
33
Save the channel in FM mode.
CANCEL/AUDIO
To cancel teletext/To change the audio
language and sound track in DVB mode.
36
25 [ ] button
To stop playing in DVD mode.
32SCAN
Long press the button to start scanning
automatically in TV/DVB/FM mode.
SIZE/TV/
To magnify teletext page/To switch between
TV and Radio modes in DVB mode.
37
7
REMOTE CONTROLLER
Remove the battery cover. Insert two SUM-4(AAA) batteries matching the -/+ polarities of
the battery to the -/+ marks inside the battery compartment, as in the following figure:
BATTERY LIFE
Generally speaking, the battery may be used for one year, but the battery life is also
related to the usage times and remote controller operation.
If the remote controller is still not operating when very near to the remote sensor window,
please replace the battery.
Please use SUM-4(AAA) battery.
NOTES
Never use rechargeable battery.
Never charge, short-circuit, disassemble and heat the battery, or throw it into fire.
Pay attention not to fall or knock the remote controller, which may cause damage or
function failure to it.
Do not use new and old battery together.
If electrolyte splashes into body, please clean it with water.
CAUTION
Please put the battery in a place children cannot access. If swallowed by accident,
please contact your local doctor immediately.
BATTERY INSTALLATION
When not using the remote controller for a long time, please take out the batteries to avoid
liquid leakage. Before replacing new batteries, please clean the electrolyte in the remote
controller.
Please confirm whether the accessories contain the power adapter.
Please make sure to use power adapter within the specification range, otherwise it will
cause damage.
POWER SUPPLY
Use the car adapter in the accessories, connect one end to the socket in you car, the
other to the DC socket in the TV.
The input voltage of the car adapter should be 12Volts.
Item
BRIGHTNESS To adjust brightness.
CONTRASTTo adjust contrast.
SATURATIONTo adjust color saturation.
This product can store up to 100-channel programs (0 99). You can scan and
store all of the channels through manual or automatic scan mode.
In TV mode, press [SETUP] button and the setup menu will show as follows:
Pressing [ ] button on the remote control,
you can select setup menu sections(setup menu
consist of
. Press [ ] or [OK]
button to enter this menu section.
" PICTURE " , " SOUND " , " TV
SETUP " , " FUNCTION ")
Press [ ] button on the remote control to select
the item, and then press [ ] button to adjust
parameters. Press [SETUP] button to return to
main menu sections.
Select " " and menu will show as follows:
Press [ ] button to select different items and
[ ] button to adjust them.
TV MENU SETUP
Description
TINTTo adjust picture tint, only valid in N 3.58/N 4.43/PA L 60 and display
mode with V-scanning frequency equal to 60HZ (please refer to P51).
9
PICTURE
PICTURE Can be changed between : "USER ", "STA NDARD ", " DYNAMIC "
and "SOFT ".
TINT
PICTURE
BRIGHTNESS
SATURATION
CONTRAST
50
40
50
50
SELECT RETURN
SETUP
ENTER
OK
PICTUREMODEUSER
PICTURE
SATURATION
CONTRAST
70
TINT50
50
70
SHARPNESS
SELECT RETURN
SETUP
ADJUST
SHARPNESS
COLOR TEMP.
To adjust picture sharpness.
Select color temperature mode : "NORMAL ", " WARM "and "COOL ".
NORMAL
COLOR TEMP.
TV MENU SETUP
10
" " Means there are more items in this page, you can press [ ] button to select them.
NOTE
Select "BRIGHTNESS " to adjust it, the sub item will show as follows :
press [ ] button to adjust the value of brightness.
BRIGHTNESS
50
RETURN
SETUP
ADJUST
Item
BALANCE
TREBLE
To adjust balance of left and right channels.
To adjust bass.
To adjust treble.
Select " "and menu will show as follows:
TV MENU SETUP
BASS
Description
SOUND MODECan be changed between USER, ,FILM."""MUSIC" " " and "NEWS"
11
SOUND
Press [ ] button to select different items and press [ ] button to adjust them. The
following are the descriptions of the sound item.
50
50
50
SOUNDMODE
BASS
BALANCE
TREBLE
SOUND
USER
NICAM MONO
NICAM
Nicam/A2 function is only valid in TV mode while current program coming with Nicam/A2
signal.
If you can receive Nicam/A2 signal, you can operate as follows to enjoy that.
You can select Nicam stereo, mono channel or bilingual through NICAM button on the remote
control. If Nicam/A2 signal is too weak, this unit will switch into mono channel automatically.
When selecting mono channel, "MONO" will show on screen; when selecting bilingual I,
"DUAL I " will show on screen; when selecting bilingual II, "DUAL I I " will show on screen
and when selecting stereo, " STEREO " will show on screen.
NOTES
Select the NICAM mode( please refer to the notes).
SELECT RETURN
SETUP
ENTER
OK
TV MENU SETUP
12
Press [ ] button to select different items and press [ ] button to adjust them.
Item
CHANNELTo change the channel number.
CHANNEL EDIT
FINE TUNING To adjust the channel frequency accurately to make the sound
and picture effect better.
MANUAL SEARCH
To scan programs manually.
Description
AUTO SEARCH
To scan programs and store all of them automatically.
Select " " and TV setup menu will show as follows:
TV SETUP
NOTES
To enter a submenu to set channel skip and channel swap.
Please refer to the next page.
TV SETUP
CHANNEL
COLOR SYSTEM
SOUNDSYSTEM
FINE TUNING
AUTO SEARCH
1
AUTO
I
40.00MHZ
SELECT RETURN
SETUP
ENTER
OK
COLOR SYSTEM
SOUND SYSTEM
Can be changed between: "AUTO ", "PA L " and " SECAM " .
Can be changed between: "B/G ", "D/K " , " L " and " I ".
Which COLOR SYSTEM mode and SOUND SYSTEM mode to use is related to the
local TV broadcasting system.
""""
If the local system is SECAM L, the color system must be selected as "SECAM" and sound
system must be selected as "L".
TV SETUP
SOUNDSYSTEM
FINE TUNING
AUTO SEARCH
I
40.00MHZ
MANUAL SEARCH
SELECT RETURN
SETUP
ADJUST
CHANNELEDIT
Item
CHANNEL
Description
SKIP
SWAP
SAVE
To select current channel here.
To select "YES " or "NO ", you can select "YES " to make current
channel unaccessible while using [CH+/-] button to browse
channels.
Select or enter the channel number directly to swap with current
channel.
Highlight this option and press the [OK] button to confirm the swap
function.
13
TV MENU SETUP
CHANNEL EDIT
SELECT RETURN
SETUP
ADJUST
SKIP
SWAP
SAVE
5
CHANNEL
NO
?
__
Select "CHANNEL EDIT " , the menu will show as follows:
AUTO SEARCH
112.25MHZ
RETURN
SETUP
FOUND:3
VHF L
Select "AUTO SEARCH " , the searching menu will show as follows:
3
1
2
3
4
The number of programs have found.
The current searching frequency Band, 3 Bands in total: "VHF L" ,"VHF H"," UHF".
The current searching frequency.
4During the searching, you can press [SETUP] button to stop it.
2
1
TV MENU SETUP
Press [ ] to select " " item and press [ ] button to enter the following section:
14
FUNCTION
You can setup system configuration here.
Description
LANGUAGE
TRANSPARENCY
RESET
Set OSD language.
To reset all value to default.
Press [ ] button to select different items and press [ ] button to adjust them.
Item
FUNCTION
LANGUAGE ENGLISH
TRANSPARENCY LEVEL3
SLEEPOFF
RESET
SELECT RETURN
SETUP
ENTER
OK
SLEEPTo set the sleep timer.
To adjust transparency of OSD. it can be change from OFF
to LEVEL6, 7 levels in total.
15
TELETEXT FUNCTION
Press [REVEAL] button to display the hidden teletext information. Press this button again
to cancel teletext information displaying.
DISPLAY MODE
COLORIZED BUTTONS (RED, YELLOW, GREEN, CYAN)
Select the corresponding teletext page through colorized buttons.
When teletext page shows, you may double zoom in to display this teletext page;
Press [SIZE] button to zoom in the upper half part of teletext page;
Press [SIZE] button again to enter the under half part of teletext page;
Press this button for the third time to return to original display mode.
ZOOM IN TELETEXT
16
User could press [SUBPAGE] button to select to the subpage of teletext.
SUBPAGE
If no signal input in TV, AV, SCART, YPBPR the screen will show a similar signal to the
following figure.
NOTE
AV ,SCART and YPBPR SETUP
17
AV
NO SIGNAL
4:50
VIDEO SETTING MENU
This unit will go into standby mode automatically
with no signal input for 5 minutes.
The menu setup of AV/SCART /YPBPR modes is much the same as that of TV mode, except
the " " section is invalid and a bit difference in sound mode. It is not repeated here.
You can find it in preceding pages.
If the input channel is SCART, this unit will automatically recognise RGB or CVBS
signal of SCART; when normal RGB signal appears, this unit will automatically switch
into RGB display mode. For this unit is combined by multiple functions, when inserting
into SCART socket, it will not automatically switch into SCART mode. You have to
select SCART channel through [SOURCE] menu, that is a little difference with that of
others TV set.
With the VGA mode supported up to 1024*768@75Hz, and speakers built in, you can use
this unit as a multimedia PC monitor. When this unit works in VGA mode, the following setup
can be done.
Press [SETUP] button to enter main section. Press [ ] button to select sections and then
press [ ] button or [OK] button to enter. If all is done, please press [SETUP] button twice to
exit and your setup data will be saved automatically.
Press [ ] button to select " ", and press [ /OK] button to enter.
To adjust brightness of picture .
Item Description
BRIGHTNESS
COLOR TEMPERATURE
CONTRAST
AUTO CONFIG
STATUS
Press [ ] button to adjust value of item.
To adjust contrast of picture .
Enter sub menu to adjust color temperature of picture. Press
[ /OK ] button to enter.(details refer to the next page)
Auto config horizontal/vertical position, phase and frequency.
Press [ /OK] button to activate.
The format of the input signal.
18
VGA SETUP
PICTURE
PICTURE
AUTO CONFIG
BRIGHTNESS
COLOR TEMPERATURE
CONTRAST
50
40
SELECT RETURN
SETUP
ENTER
OK
1024 X768 V:75HZ
VGA SETUP
Here shows the color temperature sub menu.
19
Item Description
COLOR TEMP.
RED
GREEN
BLUE
Select color temperature mode :"USER", "NORMAL", "WA R M"
and "COOL".
Adjust red value of color temperature.
Adjust green value of color temperature.
Adjust blue value of color temperature.
SOUND
Press [ ] button to select " " and press [ /OK] button to enter.
The operation of sound section here is the same as that in TV mode except the NICAM
is invalid. Please refer to P11.
Press [ ] button to select item and press [ ] button to adjust the value of the item.
NOTE: The RED,GREEN , BLUE only can be adjusted in USERmode." "" """ ""
50
50
50
SOUNDMODE
BASS
BALANCE
TREBLE
SOUND
USER
NICAM MONO
SELECT RETURN
SETUP
ADJUST
COLOR TEMPERATURE
BLUE
GREEN
RED50
SELECT RETURN
SETUP
50
50
ADJUST
NORMALCOLOR TEMP.
To adjust frequency.
VGA SETUP
20
MONITOR SETUP
Press [ ] button to select " " and press [ /OK] button to enter.
Item Description
PHASE
FREQUENCY
H-POSITION
V-POSITION
To adjust phase.
To adjust screen horizontal position.
To adjust screen vertical position.
Press [ ] button to select different items and press [ ] button to adjust .
NOTE
VGA
NOSIGNAL
1:50
If you use this unit as a PC-monitor, This unit will go into sleep
mode with no signal input for in 2 minutes.
In this mode, the indicator will turn red, and the screen is turned
off. You can wake it up by waking up your PC .
MONITOR SETUP
PHASE
FREQUENCY
H-POSITION
V-POSITION
SELECT RETURN
SETUP
ENTER
OK
50
50
50
50
VGA SETUP
21
FUNCTION
Press [ ] button to select " ", and press [ /OK] button to enter.
Press [ ] button to select different items and press [ ] button to adjust .
Item Description
LANGUAGE
TRANSPARENCY
RESET
Select OSD language .
To adjust transparency of OSD. it can be change from OFF
to LEVEL6, 7 levels in total.
Reset all value that related to picture and sound to default .
FUNCTION
LANGUAGE ENGLISH
TRANSPARENCY LEVEL3
SLEEPOFF
RESET
SELECT RETURN
SETUP
ENTER
OK
SLEEPTo set the sleep timer.
FM OPERATION
22
FM
FREQUENCY
FM
CHANNEL
MANUAL SEARCH
AUTO SEARCH
12
101.20MHz
SELECT ENTER
OKRETURN
SETUP
With radio decoder built in , you can enjoy radio programs using this unit.
Connect the FM antenna in the accessories to the FM socket on the rear panel of the TV, change
source to FM. Press [SETUP] button and a menu will show as follows:
NOTE
Up to 20 programs can be preset/stored, and you can recall them in 2 ways:
For programs 1 ~ 9, press the number buttons on remote control to access them.
For programs 10 ~ 19, press "-/--" first ,then press "0 ~ 9" to access to them;
For channel 20, just press "-/--" twice to access to it.
1. CHANNEL:
Display current channel number, press [ ] button to change channel.
2. FREQUENCY:
The frequency of current channel, press [ ] button to adjust it and press [SAVE] button to save
the new frequence of the channel.
3. MANUAL SEARCH:
Search a new channel for current channel number, press [ ] button to decrease frequency and
press [ ] button to increase frequency. When a program is found, manual search will stop and
press [SAVE] button to save the new channel.
4. AUTO SEARCH:
Search and store all the channels in FM band 87.5--108MHz. Move the cursor to AUTO SEARCH,
it become high bright, then press [ ] or [ ] button to auto search.
Press [SETUP] button to give up AUTO SEARCH.
Method 1:
Method 2:
Press [CH-] button to decrease channel and press [CH+] button to increase channel.
During scanning, you can press [SETUP] button to stop it.
FM OPERATION
SOUND
In main section press [ ] button to select " ", press [ /OK] button to enter.
The operation of sound options here is the same as that in TV mode. Please refer to P11.
SOUND
40
50
34
SOUNDMODE
BASS
BALANCE
TREBLE
MTSMONO
SOUND
FUNCTION
The operation of function options here is the same as that in VGA mode. Please refer to P21.
Press [ ] button to select " " and press [ /OK] button to enter.
23
FUNCTION
LANGUAGE
TRANSPARENCY
RESET
ENGLISH
LEVEL3
SELECT ENTER
OKRETURN
SETUP
SELECT ENTER
OKRETURN
SETUP
USER
SLEEPOFF
Disc Pictures
TV Screen
4:3 16:9
Pan-Scan Letterbox
16:9
4:3
DVD is well known for its extraordinarily large capacity and outstanding audio-video effects.
Its capacity is as high as 4.7-17 GB (approximately 7-26 times the CD capacity).With 500-line
horizontal resolution of picture , it brings a new era to household AV products.
Analog
Linear PCM
FM modulation
Linear PCM
One
430 lines or more
350 lines or more
250 lines or more
CDROM
650MB
12cm
VCD
Super VCD
Digital/MPEG1Digital Digital
Digital/MPEG2
650MB
44.1kHz
12cm
74min.
650MB
12cm
45min.
CD
650MB
44.1kHz/16bit
12cm
74min.
LD
44.1kHz/16bit
30cm/20cm
1 side 60min.
2 sides 120min.
Digital/MPEG2
Single-
sided
1layer
4.7G
Single-
sided
2layers
8.5G
Double-
sided
1layer
9.4G
Double-
sided
2layers
17G
133min.
500 lines or more
Multiple
Dolby Digital
32 types
242min. 266min. 484min.
DVD
48kHz,96kHz/16,20,24bit
12cm
Recording Method
Capacity
Playback time
Disc Diameter
Horizontal
Resolution
Aspect Ratio
Subtitle
Audio
Sound Quality
Max. 16 types
DVD disc can support as many as 8 dubbing languages and 32 subtitle languages.
Multiple languages and subtitles
User can select to play the desired plots (the beginning, development or ending) of the same disc.
Multiple story plots
Multiple aspect ratios support various TV screens.
Multiple aspect ratios
Comparison Between DVD and Other Discs
Function Introduction
DVD OPERATION
Brief Introduction to DVD
24
26
DVD OPERATION
Sizes Recorded Contents
Types
CD-DA Digital audio
VIDEO CD Compressed digital audio+compressed digital video
(dynamic picture)
DIGITAL VIDEO
SVCD: Compressed digital audio+compressed digital video
(dynamic picture)
12cm
12cm
12cm
12cm DVD:Compressed digital audio+compressed digital video
(dynamic picture)
Compatible Disc Types
NOTES
These icons on the top banner indicate the disc types that the function described in
this section applies to.
VCD
SVCD
Issues related to CDVCDSVCDDVD
Applies to CD disc
CD
Applies to DVD disc
Applies to SVCD disc
Applies to VCD disc
DVD
This model does not support the 8cm disc. Do not insert that type of disc into
this device to prevent disc jam.
Applies to MPEG4 disc
MPEG4
MPEG4
12cm MPEG 4: Compressed digital + compressed digital video (dynamic
picture).
MPEG 4
23
456
1
1. Power on and place the disc (with label side facing users) to the door and the unit
will draw in the disc and switch signal source to DVD mode automatically.
2. Press [ ] button to begin playing disc.
3. Press [ ] button to stop playing.
5. When finishing playing, switch signal source to other working state or press [ ]
button to make the unit enter standby state. Please pull out the power plug from
power socket when not using the unit for a long time.
The unit begins to read disc information.
CDVCDSVCD
DVD
4. Press [ ] button to take out disc.
EJECT
STANDBY
PLAY
STOP
When the unit is playing a disc, press [ ] button the first time and the unit enters pre-stop state,
press [ ] button again and the unit enters stop state.
At the pre-stop state, if you press [ ] button, the unit will continue to play from the stopped point.
At the stop state, if you press [ ] button, the unit will play from the beginning point of the disc.
Press [ ] button when playing MPEG4 discs and the unit enters stop state directly.
DVD OPERATION
27
PLAYBACK
MPEG4
2. Press [VOL+/VOL-] buttons on the remote control of this unit.
Press [VOL+] button to increase volume; press [VOL-] button to decrease volume; the
maximum volume is 100.
CDVCDSVCDDVD
1. Press [VOL+/VOL-] buttons to adjust volume.
MPEG4
VOLUME CONTROL
VOL
RATIO
SAVESCAN
28
DVD OPERATION
PLAY/PAUSE PLAYBACK
1. Press [ ] button in playback status.
INFORMATION
CDVCDDVDSVCD
1. Press [INFO] button.
Disc information and operation function hint display on TV screen when in operation.
Press [INFO] button to display the following function:
DVD disc
TT XX/XX CH XX/XX X:XX:XX
Track XX/XX X:XX:XX
Super VCD, VCD, CD discs:
CDVCDDVDSVCDMPEG4
Press [ ] button once to pause playback, display on TV screen:
2. To restore playback, press the [ ] button.
23
456
1
PLAY
When you set the screen save mode to ON(see Page 40 for details), the display on TV
screen turns to screen saver status after the picture on TV screen keep still for about 2
minutes (in mode such as pause mode, stop mode, menu select, set up menu, no disc
mode and so on).
NOTE
DVD MENU PLAYBACK
DVD
Some DVD discs are made with title menu or chapter menu function.
INFO
DVD OPERATION
1. Press [DISC MENU] button to display menu on TV screen for selection, operate
according to the hint of menu and press number buttons to select.
2. Press cursor button to select track you desired,
then press [ ] button or [OK] button.
ROOT MENU1. ........
2. ........
3. ........
23
456
789
1
0
PLAY
DISC MENU
Number
Cursor
OK
NOTE
Press [DISC MENU] button to return to initial menu.
The return location varies with discs.
VCDSVCD
When playing SVCD,VCD2.0 discs with menu playback function, you may enjoy simple menu
playback alternation function. You may set menu playback state in the setup menu and select
menu playback or sequence playback.
For instance, VCD 2.0 disc menu playback.
VCD, SVCD MENU PLAYBACK
2. After entering main menu 1, TV screen displays submenu.
2.
3.
4.
5.
1.
3. Press [ ], [ ] buttons to turn pages.
4. Press number buttons to select submenu content. For instance,
press number button 5 and the unit begins to play the fifth track.
2.
3.
4.
1.
5.
5. When playing, pressing [DISC MENU] button to return to the root menu.
1. TV screen displays main menu.
Press number buttons to select. For instance, press number
button 1 to select main menu 1.
1.
2.
1.
2.
23
456
789
1
0
DISC MENU
Number
Cursor
OK
29
456
789
0
30
DVD OPERATION
Direct play is a creative function that very helpful for users to enjoy DVDs. With direct
play function, you can play DVD directly, skipping the legal warning, advertisements,
chapter selection and other thing that come before the movies start. You can enjoy
pure movies without bothering.
When the disc is loaded and the legal warning, advertisements, chapter selection
message shows, just press [ ] button to activate direct play function and start
a pure movies playback.
DIRECT PLAY
DIRECT PLAY
When you are enjoying VCD with PBC function, direct play can disable the PBC and VCD
will be played in sequence.
NOTE
PBC PLAYBACK
VCD
SVCD
Enjoy PBC alternate function when playing Super VCD, VCD2.0 disc with PBC function,
For example:playVCD2.0 disc.
1. Main menu displays on TV screen A:
Press number button to select. For example: select main menu 1. The TV screen as
show in B:
1. ........
2. ........
1. ........
2. ........
2. Submenu displays on TV screen after enter into main menu 1.
1. ........
2. ........
3. ........
4. ........
5. ........
3. Press[ ] or [ ] button adjacent page.to turn to
4. Press number buttons to select submenu. For instance,
press number5,the player begin playback with track 5.
5. Press [DISC MENU] button to submenu. Press again to
return to main menu.
6. Press [DISC MENU] button to shut off the PBC and start
the sequence playback function.
23
456
789
1
0
DISC MENU
Number
Cursor
OK
RATIO
SAVESCAN
As for VCD,SVCD or CD disc with multiple channels, you may select audio output from left or
right channel or select stereo audio output. For VCD disc, left channel records dubbing and
right channel records singing, and you may select left channel for dubbing.
VCD,SVCD,CD disc: Mono Right
Mono Left
Stereo
Language type varies with disc recording.
When playing some DVD discs, pressing [LANGUAGE] button to switch language may
result in playing the track from its beginning.
For VCD story disc with double languages, you may press [LANGUAGE] button to
select the desired language.
NOTE
DVD disc:
Audio 1/2
French
Audio 2/2
Chinese
LANGUAGE
DVD OPERATION
To SVCD,VCD2.0 discs, the repeat function cannot be operated in menu playback mode.
1. Press [REPEAT] button. Each press of REPEAT button may realize different repeat functions.
The repeat playback function enables a certain title/chapter/track/disc repeated.
DVD DISC:
SVCD,VCD,CD discs:
To SVCD,VCD2.0 discs, the repeat function is effective in sequence playback mode; to VCD1.1,
CD discs, the repeat function may be directly operated.
Track Repeat Off
ALL
Repeat Off
TitleChapter ALL
CDVCDSVCDDVDMPEG4
REPEAT PLAYBACK
REPEAT
32
Mix-Mono
33
DVD OPERATION
The A-B repeat function may be invalid to some discs.In menu playback mode, the segment
can only be selected in the track.
3.Press [A-B] button for the third time.
The unit restores to normalplayback.
NOTE
When playing disc, you may press [A-B] button to play your desired segment content repeatedly.
1.In normalplayback, press [A-B] button at the beginning point (point A) of the segment that
you desire to play repeatedly.
TV screen displays:
A
2.In normalplayback, press [A-B] button at the ending point (point B) of the segment that
you desire to play repeatedly.
TV screen displays:
AB
The unit automatically returns to point A and begins to play the selected segment (A-B).
CDVCDSVCDDVDMPEG4
REPEAT PLAYBACK OF SELECTED SEGMENT
A-B
1.Press [ ] button and the unit begins fast forward playback.
Press [ ] button each time and the disc playback speed switches in the following sequence
circularly:
2.Press [ ] button and the unit begins fast backward playback.
Press []button each time and the disc playback speed switches in the following sequence
circularly:
When playing discs, you may select fast forward or fast backward playback to search a certain
point.
CDVCDSVCDDVDMPEG4
2X
16X32X
8X
4X
2X
16X32X
8X
4X
FAST PLAYBACK
34
DVD OPERATION
1.Search title and chapter.For instance, search the 2nd chapter in title 6.
Inputting a certain time, title number or chapter number directly may search in the disc fast and
then play forward from this position.
Play DVD disc
DVDSVCD VCD CD
MPEG4
PLAY FROM THE DESIRED POSITION
Then press number button 6 to select Title 6, shown in the figure:
Title06 /30 Chapter /02
2.Search title time
Press [GOTO] button until TV screen displays the following figure. Then press number
buttons to input hour, minute and second.
Title 06/30 Time ::
Finally press number button 2 to select Chapter 2, shown in the figure:
Title 06 /30 Chapter 02/02
Press [GOTO] button and TV screen displays:
Press []button to move cursor and lighten the title number, shown in the figure:
Title 03/30 Chapter /02
Title /30 Chapter 01/02
3.Search chapter time
Press [GOTO] button until TV screen displays the following figure. Then press number
buttons to input hour, minute and second.
Chapter 01/04 Time : :
1.Search disc time
Play SVCD, VCD and CD discs
Press [GOTO] button until TV screen displays the following figure. Then press number
buttons to input minute and second.
Disc Go To--:--
1.Select track
2.Search track time
Play MPEG4 disc
Press [GOTO] button until TV screen displays the following figure. Then press number
buttons to input the track.
Select
Press [GOTO] button until TV screen displays the following figure. Then press number
buttons to input hour, minute and second.
-:--:--
2.Search track time
Press [GOTO] button until TV screen displays the following figure. Then press number
buttons to input minute and second.
Track Go To--:--
Go To
35
DVD OPERATION
3.Select the track
Select Track --/15
Press [GOTO] button until TV screen displays the following figure.Press number buttons to input
track.
GOTO
ZOOMING THE DISPLAYED FRAME
VCDSVCDDVDMPEG4
1.When playing a disc, press the [ZOOM] button can open the zoom in/out function, and the
TV screen displays( take X2 mode as an example):
Zoom in/out the player frame.
The frame is magnified to 2 times of the normalsize.
4.When the fame is magnified, press the [] buttons to move the frame.
2.Press the [ZOOM] button continually, all the magnified/ minified modes display on the
screen in turn.The magnified/ minified modes includes:2X,3X,4X,1/2,1/3,1/4.
3.When the mode is on , press [ZOOM] button to close the zoom in/ out function, and the
frame restores normalsize.
1/4
ZOOM
MPEG4 is the video/audio standard published by MPEG(Moving Pictures Experts Group) in
November,1998.As the discrepant parts between frames of the picture only are processed
and the same parts are deleted, the data quantity is greatly decreased. T he most distinct
feature of MPEG4 i s the high compression and clear imaging. Furthermore, MPEG4 provides
elastic specifications to adjust the stream according to the user requirements. The larger
stream can be used when collecting private films; and the small stream can be used in network
transferring, which make MPEG4 widely used.
JPEG(Joint Photographic Experts Group) is the most widely used picture compression and
storage format today. Utilizing high efficiency compression algorithm, JPEG compresses the
original picture 15
to 20 times with excellent picture quality. JPEG features small size data,
convenient application and is supported by most picture processing software, so it is very
suitable to store photos.
MPEG4 AND JPEG FILE PLAYING
The strong decoding capability of this unit can decode and play the files with the above formats.
In the course of playing, an operation menu will appear and its construction is shown as follows.
36
DVD OPERATION
2
DIR window
Display the current
path.
Display the current
state information.
1
State window 4
Scroll bar window
Indicate the current file's position.
Display the current
path's file.
3
File window
5
Preview window
JPEG image preview.
6
Information window
Display the current operation
prompts.
The state information in state window is as follows:
4
00:57
002/073
03:31128
2
13
5
6
Elapsed playback time
1
Total playback time
2
The audio bit rate (generally the bit rate is 128kbps,
sometimes it is VBR).
3
Current playback mode indicator
4
Track indicator
5
6
Dynamic frequency spectrum indicator
00:00 00:00
004/369
\PIC\
Du000
Du001
Du002
..
1
2
3
4
5
6
After you put a MPEG4 format file into the unit, it will search disc information and display the
operation menu as figure A (The displayed content varies with disc.).
1. Play MPEG4 file
In Figure B, press [ ] button to select the MPEG4 format file you desired and press [OK]
button to confirm. The unit begins to play MPEG4 format movie.
A:00:00 00:00
\
Du000
Du002
Du001
Du003
001/004
Press [] button to select the directory you desired and press [OK] button to confirm.
For instance, you select the directory Du000 in Figure A, press [OK] button and TV screen
displays as in Figure B. The window returns to the previous directory when you select [ .
..]
or press [] button.
B:00:00 00:00
001/369
\Du000\
MP000
MP001
MP002
..
A/V
A/V
A/V
2. Play JPEG file
After you put an JPEG format file into the unit, it will search disc information and display the
operation menu as in the following figure. After selecting JPEG file, the preview window will
appear this file's preview image to facilitate you to select.
After you select the JPEG file you desired and press [OK]
button to confirm, the picture will
display in full screen.
00:00 00:00
004/369
\PIC\
Du000
Du001
Du002
RESOLUTION 640480
..
DVD OPERATION
1. Press [ ],[ ] button may turn to the next or last page.
Other basic operation methods
Other functions of JPEG file
NOTE
When buttons are invalid, TV screen displays:
Please press effective button again.
2. When in preview playback, pressing [DISC MENU] button will exit preview playback function.
1. When playing JPEG file, pressing [ ] button will achieve preview playback function.
At the same time, all JPEG files are displayed on T V screen. One page can display up
to 12 pictures at most. The remaining ones are shown on the next page. P ressing [ ]
button will enter the next page and [ ] button will enter the previous page. Y ou may
press number buttons or [ ] button to select the picture you desired and press [OK]
button to confirm.
37
23
456
789
1
0
SLEEP
DISC MENU
Cursor buttons
OK
MPEG4
23
456
789
1
0
SLEEP
RATIO
SAVESCAN
1.Down mix mode:this item is used to set this unit's DOWN MIX mode to change multi
channelaudio into 2-channelaudio output.
Optionalsettings: LT/RT, Stereo; Default: Stereo
1.TV Display:This item is used to set the output picture ratio of this unit.
Optionalsettings: Normal/PS, Normal/LB,Wide, Wide Squeeze; Default: Wide.
2.OSD language:This item is used to set the OSD language .
Optionalsettings: English; Default: English
40
3.Screen Saver:Open or close the screen saver.
Optionalsettings: On, Off; Default: On
DVD FUNCTION SETUP
GENERAL SETUP
AUDIO SETUP
General Setup Page
Last Memory
On
Screen Saver
TVDisplay Wide
OSD Lang ENG
Go To GeneralSetup Page
On
Audio Setup Page
3DProcessing
HDCD
Down mixSTR
Equalizer
Dolby DigitalSetup
Go To Audio Setup Page
SPDIF Setup
Turn on this TV, press [SOURCE] button to change source to DVD, press [SETUP] button,
then press [ ] button to choose DVD item, the DVD setup menu will be displayed as follow:
4.Last Memory:This player can save the currently played time point automatically when
you leave the current DVD disc playback (switch from DVD to card read state, switch
from DVD signalsource to other signalsource, enter standby state in DVD mode).
NOTE:When switching to DVD playback state again, this player can automatically search the time
point saved last time to continue playing. If you want to play from the beginning, please
press [ ] button twice and then press [ ] button.
Optionalsettings: On, Off; Default: On
2.SPDIF Setup:Press [OK]or []button to enter the submenu of SPDIF setup.
DVD FUNCTION SETUP
41
5.3D Processing:Set reverberation mode .
6.HDCD:Set filter mode.
Optionalsettings: Off, Concert, Living Room, Hall,Bathroom, Cave, Arena, Church; Default: Off.
Optionalsettings: Off,1X, 2X; Default: 1X.
Treble Boost: Enhance high frequency sound level, optionalsettings: On, Off; default: Off.
Super Bass: Enhance very low frequency sound level, optionalsettings: On, Off; default: Off.
Optionalsettings: SPDIF/RAW,PCM; Default:SPDIF/SPDIF/RAW
LPCM output: This item is used to set the output frequency of LPCM audio data
to fit for different power amplifiers.
Optionalsettings: 48K, 96K; Default: 48K.
3.Dolby DigitalSetup:Press [OK]or [ ] button to enter the submenu.
DualMono:
Dynamic:
Optionalsettings: Stereo, L-Mono, R-Mono, Mix-Mono ;Default: .Stereo
Optionalsettings: Off,1/4,1/2,3/4,Full;Default: Off.
4.Equalizer : Press [OK]or [ ] button to enter the submenu to adjust the items.
EQ Type: Set equalizer type, optionalsettings: None, Rock,Pop, Live, Dance, Techno, Classic,
Soft; Default: None.
Bass Boost: Enhance low frequency sound level, optionalsettings: On, Off; default: Off.
SPDIF output: This item is used to set the bit stream type of the digital output.
SDIF Setup Page
Setup SPDIF
LPCM Out 48K SPDIF/PCM
SPDIF Output RAW SPDIF/RAW
Dolby DigitalSetup
Dual Mono (1+1) Setup
DynamicL-Mono
Dual Mono STR Stereo
R-Mono
Mix-Mono
Equalizer Page
Select Equalizer Type
Bass Boost
EQ Type None None
Pop
Live
Dance
Techno
Classic
Soft
Off
Super Bass
Treble Boost
Off
Off
Rock
NOTE:Only when the SPDIF output is set the SPDIF/PCM, the frequency of LPCM audio data
is optional.
DVD FUNCTION SETUP
1.TV Type:To set the output video system of this player.
Optionalsettings: PAL,Auto, NTSC; Default: PAL.
2.PBC:To set the PBC status.
Optionalsettings: On, Off; Default: On
When playing SVCD,VCD2.0 discs, if PBC is set On, this unit enters PBC playback mode; if PBC
is set Off, the unit plays the disc according to track sequence.
PREFERENCE SETUP
Preference Page
Disc Menu ENG
Parental
AudioENG
PBC On
TVType PAL
Go To Preference Page
Subtitle
ENG
Country Region ENG
Default
Off
5. Disc menu language: This item is used to set the preference disc menu language
when playing.
Default of disc menu language: English
3.Audio:This item is used to set the preference audio language when playing.
4.Subtitle:This item is used to set the preference subtitle language when playing.
2.Brightness:This item is used to set the brightness of video outputs.
1.Sharpness:This item is used to set the sharpness of video outputs.
Optionalsettings: High, Medium, Low; Default: Med.
4.Gamma:This item is used to set the color temperature of video output.
Optionalsettings: High, Medium, Low, None ; Default: None
5.Hue:This item is used to set the hue of video outputs.
3.Contrast: This item is used to set the contrast of video outputs.
6.Saturation:This item is used to set the saturation of video outputs.
VIDEO SETUP
Video Quality Setup
Hue 00
Saturation 00
Sharpness Med
Contrast 00
Brightness 00
Go To Video Setup Page
Gamma
None
42
DVD FUNCTION SETUP
Password : This item is used to set a six digit password to enable you to change the parental
controlratings.
Password Mode: To set whether parental control function needs a password, optional setting:
On, Off; Default: On.
PASSWORD SETUP
Password : To change the password of the parental control function, default :000000.
43
Password Setup Page
Password Mode On
Password
Go To Password Setup Page
When changing the parentalcontrolratings, a password is needed.Please refer to the
following password item for details.
8.Default:This item is used to restore all settings to the default value except "Parental
control and Password" in the setup menu.""
6.Parental: this item is used to set the parentalcontrolratings to prevent children from
watching restricted contents.(In the event the disc supports this function)
Optionalsettings: KID SAFE,G,PG, PG 13, PGR,R,NC17, ADULT,Off; Default: Off
NOTE
Audio, subtitle and disc menu language are only effective in DVD mode.
If the disc is not recorded with the language you appointed, the unit will apply the language
that the disc appointed to play.
Select other languages: press [ ] button to move cursor to "OTHER" item, press [OK]
button and then number buttons to input the language code you desired.After input finishes,
press [OK]button again.
NOTE
7. Country Region:Set the country region according to your country.
DVB FUNCTION SETUP
DVB- T Setup Page
Area UK
Parental Age
Time Zone
Go To DVB - T Setup Page
DVB
DIS
DVB-T SETUP
The DVB-T Setup Page is composed of five parts: Area, Time Zone, parental Age, Antenna
power, Channel Setup.
Note : Press [ ] button to select different item, and press [OK] or [ ] button to enter it.
Press [ ] button to return to the previous menu or to exit the current menu .
Optional settings: A ustralia, Austria, Belgium, Denmark, Estonia, Germany, Spain, France,
Italy, Netherland, Taiwan, UK ,Others, Default: UK.
Note : you must set the correct area before searching channels.
You can choose the area of your country.
1.Area
To choose your time zone, it is set depending on your country. If you dont know the exact
time, please ask l ocal time manage department.
Default: 00:00
2.Time zone
This item is used to set the parental control ratings .To prevent your children watching
undesired programmes.
Optional settings: 4,5,6,7,8,9,10,11 ,12,13,14,15,16,17,18,Disable
Default: Disable
3.Parentalage
5.Channelsetup
This item is used to search channels, edit the channel list or your favourite channel l i st,
view program guide information, etc.
45
Antenna Power
Channel Setup
Channel Remap
Auto Scan Start
Adjust Channel
Manual Scan
Auto Scan
DVB
Reserve Channel
Auto Scan
Connect the antenna to the RF socket on the TV as follows, then you can automatically
search channels without entering any other information.
Channel setup
Off
4.Antenna power
Turn on/off antenna power supply, optional settings: On, Off; Default: Off.
46
Press [SCAN] on remote control more than 3
seconds to auto scan.
Using the [ ] button to select the A uto Scan item,
and press [OK] or [ ] button to select Start item,
then press [OK] button;
A prompting message will be displayed to request that
you confirm, select OK and press the [OK] button to
confirm.
In the scan process, the scan result will be displayed in the Auto Scan window.
DVB FUNCTION SETUP
Note: If you press the [SETUP] button during scanning, the operation is stopped and a prompting
message will be displayed at the bottom of Auto Scan window. Select OK and press [OK]
button to abort auto scan operation, and the channels found until then will be saved. And
select Cancel and press [OK] button to return to auto scan process.
Wait while the TV searches for the channels, this may take a few minutes.
""
""
Once you press [OK] button to start auto search operation, all the saved channels will be
cleared.
You can scan channels manually by setting scan parameters.
1. In setup menu, select Manual Scan item using
the[ ]button, and press [OK] or [ ] button to
select Start item, then press [OK] button.
2. Use [ ] button or enter you desired frequency
to search directly.
3. Select Scan item to start manual scan operation.
4. The scan result will be displayed on the manual scan
window, you can save the found channels or delete them if the T V has the same program.
""
Manual scan
Manual Scan
Freq: 177500KHz
Status Found Channels
Scan
Auto Scan
Freq: 65000KHz
TV Total: 00
Radio Total: 00
Progress:
Status Found Channels
40%
You can change every channel position as you like in channel remap window.
Channel Remap
Adjust channel
You can set your favorite channel, set parental control age for some channels or skip
channel in A djust Channel window.
1. Select channel using [ ] button , Press [RED] button to set this channel as one of
your favorite channels.
2. Select channel using [ ] button , if you don't like this channel press [GREEN] button
to skip it .
3. Select channel using [ ] button, press [YELLOW] button to set this channel as a
protected one, to prevent children dialog from watching the undesired program.
Note: If the password mode is set to be On, when you set a channel protected, a password
will be needed to inputted in the Protect Channel window. The default password is
000000.
You can set the time when the reminding signal should be displayed before the program
starts.
Press [EPG] button, then a program information list of current channel will be displayed in
a window, move the cursor to PROGRAM, then press [OK] button, a more detailed program
list will be displayed, move the cursor to the program which you want to watch, then press
[OK] button ,the program is saved in your reserved channel.
47
DVB FUNCTION SETUP
If you want to watch a special program on a channel at a later time, you can reserve it.
Then a reminding signal will be displayed on screen several minutes before it starts.
Reserve Channel
DVB
Tenestrial
EPG002 FlowerGd 4Mbs
Channel FlowerGd 4Mbs
Program
DVB
Notify time
OK
03 min
Password : This item is used to set a six digit password to enable you to change the parental
controlratings or the protected channels..
Password Mode: To set whether parental control function or protected channels needs
a password, optional setting: On, Off; Default: On.
PASSWORD SETUP
Password: To change the password, default :000000.
Password Setup Page
Password Mode On
Password
Go To Password Setup Page
DVB
Please check for causes of problems in accordance with the following chart before contacting
maintenance personnel.
Cannot power on Please make sure the power cord is correctly connected
No sound
Please make sure the audio cord is correctly connected
Check volume
Volume too low
Check volume
If volume is still too low when adjusting volume to maximum,
please check whether the input device is correctly
Please make sure the antenna is well connected
Remote control failure
Check whether remote control battery is full charged
Whether battery installation is correct
Whether obstacles exists between remote control and the
unit's receiving window
Check whether receiving window has strong light
Symptom Causes and Correction
Symptom Causes and Correction
Black screen, power
indicator light off
Check whether the power cord is well connected, and
whether this unit is powered on
Check whether the signal cord of input device is well
connected
Check whether input device is powered on
Check whether the input device signal is in this unit's
specification
Check computer output mode: control panel-display-setup
If the setup does not accord with this unit's specification,
please change the display setup
Horizontal scanning frequency: 30kHz 75kHz
Max display mode:
1024X768 75 Hz@
Image display flicker,
unstable
~
Vertical scanning frequency: 50 Hz 75Hz
~
TROUBLESHOOTING
DISPLAY TROUBLESHOOTING
SOUNDAND TV TROUBLESHOOTING
Snowy picture
48
Make sure there is nothing plugged into the headphone jack

Produkt Specifikationer

Mærke: Avtex
Kategori: LCD TV
Model: W152D

Har du brug for hjælp?

Hvis du har brug for hjælp til Avtex W152D stil et spørgsmål nedenfor, og andre brugere vil svare dig


LCD TV Avtex Manualer

Avtex

Avtex L165DRS Manual

12 Januar 2025
Avtex

Avtex W152D Manual

19 Juli 2024

LCD TV Manualer

Nyeste LCD TV Manualer

JVC

JVC LT-19DB9 Manual

15 Januar 2025
JVC

JVC LT-26ED91U Manual

15 Januar 2025
Walker

Walker WPS28265 Manual

14 Januar 2025
JVC

JVC LT-42X579 Manual

14 Januar 2025
Hitachi

Hitachi L40A105A Manual

14 Januar 2025
Finlux

Finlux 42FLSKR170LHCD Manual

14 Januar 2025
Hitachi

Hitachi L42N03A Manual

13 Januar 2025
Samsung

Samsung LA32C400E4 Manual

13 Januar 2025
Technika

Technika LCD40-271 Manual

13 Januar 2025
SunBriteTV

SunBriteTV SB-4660HD Manual

12 Januar 2025