B-Speech Jass Manual

B-Speech Ikke kategoriseret Jass

Læs nedenfor 📖 manual på dansk for B-Speech Jass (6 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/6

BDL Jass 11_2012

User Manual

Congratulations

Congratulations on your purchase of the B-Speech® Jass multilink-headset. This headset

allows you to communicate wirelessly through your mobile phone and includes a built-in mi-

crophone and earphone. It uses BT 2.1 and multilink technology, but is also compatible with

mobile phones using version 1.1 and 1.2 technology. Your B-Speech

® Jass headset uses a

built-in Lithium Polymer rechargeable battery, with long life.

Package Contents

• Headset B-Speech® Jass

• 2 Ear hook

• 3 Rubber ear gels

• USB Charger Cable

• User Guide

Headset overview

1. Ear hook

2. Volume +

3. Volume -

4. Earphone

5. Microphone

6. Charging port

7. Multifunction key

8. Status LED

The headset can be worn

on either ear. Just clip the

ear hook on to the preferred

side.

Charging the internal battery

Before using your headset, please charge the internal battery.

To charge the battery:

1. Connect the USB Charger to a USB port.

2. Plug the adaptor‘s connector into the charging port of Jass

3. While charging, the red LED light will stay on and turn off when charging is complete.

You can then unplug the adaptor‘s connector from the headset and disconnect the

adaptor from the electrical outlet.

4. During normal use you see the red LED blinking, please charge the Headset

5. Charging time is about 2 hours

Switching the headset on or off

To switch on:

Press and hold the multi-function key for 3 seconds until the blue LED comes on.

To switch off:

Press and hold the multi-function key for 3 seconds until the red LED ﬂ ashes.

Note, if there is no connection with B-Speech® Jass, the headset will switch off automati-

cally. After switching on, Jass will go into auto-pairing mode and connect to the mobiles,

which were paired before

Pairing Procedure

Your B-Speech® Jass needs to be paired to your Bluetooth® mobile phone before it can

be used. This is a two part process; one part is carried out on the headset and the other is

carried out on the mobile phone.

Note that different mobile phones use different methods of pairing.

To pair your B-Speech®Jass:

1. Make sure that the B-speech® Jass is powered off. Press and hold the multifunction key

for about 7 seconds. The blue LED will ﬁ rst light up, keep holding down until the LED

ﬂ ashes red and blue. This indicates that the B-speech® Jass is in pairing mode.

2. Use your phone‘s menu to search for Bluetooth® audio devices. The phone should

indicate it has found the B-Speech® Jass headset. Conﬁ rm that you want to pair your

mobile phone and headset together. If you are unsure how to go through the pairing

process on your mobile phone, please refer to the user manual.

3. When asked for a pin key, enter: . Your phone will con„0000“ ﬁ rm that pairing has been

successful.

Note that there is usually a time limit to pair devices. It is usually not necessary to enter the

PIN code for phones with Bluetooth version 2.1.

Note for Multi-link use:

In order to pair a second mobile please press the volume - button for 3 seconds, the LED will

alternate rapidly between blue and red, B-Speech® Jass will go into pairing Mode and you

can pair the second mobile. Please proceed with pairing as described before. To activate

the multilink-function turn the headset off and on. The headset will connect to both paired

phones.

Phone call use

Making a call from the mobile phone

While your mobile phone is paired with your headset, you can use the mobile phone to make

phone calls in the same way as normal. The only difference will be that the earphone and

microphone functions of the head set will be used instead of the phone‘s.

Answering a call

To answer a call after a ring tone heard in your headset, simply press the multi-function key.

Note for Multi-link use:

In Multi-link mode you can hold a running conversation to accept an incoming call from

the second mobile phone and switch between those two phone calls. During a running

conversation with the ﬁ rst mobile phone, press the volume + key 3 seconds to hold the ﬁ rst

and accept the second mobile phones call. The conversation of the ﬁ rst mobile phone will be

set to hold. To switch between both calls, press the volume + key 3 seconds again. After the

active call is ended, the hands-free set will automatically switch to the second running call.

Note that you can set your mobile phone to automatically answer calls, which means

you do not even need to press the multi-function key. Please refer to your mobile phone‘s

user guide for more information about this setting.

Ending a call

During a call, press the multi-function key to hang up. If the other person hangs up ﬁ rst, then

the call will end automatically.

Voice dialling through the headset

In order to use the voice dial feature of your headset, your phone must support voice dialling

and must have voice tags stored. To use voice dialling, the corresponding voice proﬁ les must

be stored I your Phone Your Mobile must also support this function. Press the multi-function

key brieﬂ y. You will hear a short tone. Speak the voice tag immediately. Your phone will

make the call.

Last number redialling

When the headset is in standby mode (not in conversation), press the volume + key 3

seconds, (tone appears) and your phone will re-dial the last number that you called.

Note: This function only works on Bluetooth® phones that support the Hands-free proﬁ le

In the multi-link mode, the number is either the number of the last paired or the last used

mobile.

Transferring a single call

During a call, you can press and hold the Multifunction key for 3 seconds (tone appears), to

switch the conversation between the headset and the mobile phone. Repeat the operation

to return.

Note: Please note that your mobile phone have to support this function. If your mobile phone

does not support it please use it to transfer the call back to your headset.

Rejecting Calls

Press the multi-function key for 3 seconds during an incoming phone (tone appears) call to

reject the call.

Microphone Mute

While talking using the headset press the volume - key 3 seconds to mute the microphone.

Repeat the operation to activate the headsets microphone.

Adjusting the volume

• To increase the volume, brieﬂ y press the increase volume key.

• To decrease the volume, brieﬂ y press the decrease volume key.

Bluetooth® headset speciﬁ cation

• BT Version 2.1 Class 2

• Maximum distance 30 Feet (10 meters)

• Multilink, 2 mobile phones can be used simultaneously

• Typical standby time is up to 100 hours

• Typical talk time is up to 7 hours

• Typical re-charge time is 2 hours

• Battery type: Lithium Polymer rechargeable

WARNING: Risk of explosion if battery is replaced by an incorrect type. Dispose of used

batteries according to the instructions.

Registration and Safety

Certiﬁ cation/General Information

We hereby declare, that this device carries the CE mark in accordance with the regulations

and standards. It conforms with the fundamental requirements of the R&TTE- (1995/5/EC),

EMC directive 2004/108/EC as well as the Low Voltage Directive 2006/95/EC.

You can ﬁ nd the complete declaration of conformity under www.b-speech.com.

Note on environmental protection:

After the implementation of the European Directive 2002/96/ EU in the national legal

system, the following applies: Electrical and electronic devices may not be disposed

of with domestic waste. Consumers are obliged by law to return electrical and

electronic devices at the end of their service lives to the public collecting points

set up for this purpose or point of sale. Details of this are deﬁ ned by the national law of

the respective country. This symbol on the product, the instruction manual or the package

indicates that a product is subject to these regulations. By recycling, re-using the materials

or other forms of utilising old devices, you are making an important contribution to protecting

our environment.

Produkt Specifikationer

Mærke:	B-Speech
Kategori:	Ikke kategoriseret
Model:	Jass

Har du brug for hjælp?

Hvis du har brug for hjælp til B-Speech Jass stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret B-Speech Manualer

B-Speech Pago Manual

16 August 2024

B-Speech Jass Manual

15 August 2024

B-Speech RTX1 Manual

10 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Snom HD300A Manual

4 November 2024

Atlona NETGEAR-AXM Manual

4 November 2024

Sanus VMF822 Manual

4 November 2024

Sanus VLF828 Manual

4 November 2024

Sanus VSF817 Manual

4 November 2024

BEKO BHCP65422BCH Manual

4 November 2024

Blaupunkt GG3010 Manual

4 November 2024

Blaupunkt BP-YF07D Manual

4 November 2024

Blaupunkt GG6010 Manual

4 November 2024

Native Instruments Kithara Manual

4 November 2024