Baby Lock Accomplish 2 Manual
Læs nedenfor 📖 manual på dansk for Baby Lock Accomplish 2 (3 sider) i kategorien Symaskine. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/3
• Pull up the thread antenna to its highest position. Place the thread
spool on the first spool pin. Pass the thread up through the first
triangular hole on the antenna and then down through eyelet
and around the tension disk.
• Pass the thread through the bobbin winding thread guide as
shown on the machine.
• Bring thread through the top thread notch on the bobbin.
Position bobbin on post.
• Pull latch lever to hold bobbin in place and return it to its
original position.
• Pass thread through the quick bobbin threading device until
the thread is cut.
• Press the bobbin winding clutch up against empty bobbin.
Start winding the bobbin a few rotations, then stop and trim the
extra thread next to the notch on the bobbin.
• Stop the winding process when the bobbin is full, then manually
move the bobbin winding clutch back to its original position.
Remove bobbin and cut the thread.
• To locate the bobbin case, raise the needle plate, lower the
door and place the bobbin inside the bobbin case. Bobbin
should be positioned so it winds to the left. Run the thread
through the thread notch and under latch spring, so that a
length of thread is exposed.
1.
2.
3.
4.
5.
let’s get to the basics
Your machine is out of the box and you have plenty of ideas waiting to get out,
right? Let’s get the basics out of the way. Before you start sewing, you’ll have
to wind a bobbin and then thread your machine. But don’t be intimidated – it’s
easier than you think with Accomplish 2’s friendly features. Once you’ve followed
these quick and easy steps, simply select a stitch and you’re ready to sew!
the bobbin
D02F7J-001
Produkt Specifikationer
| Mærke: | Baby Lock |
| Kategori: | Symaskine |
| Model: | Accomplish 2 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Baby Lock Accomplish 2 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Symaskine Baby Lock Manualer
10 December 2024
29 August 2024
21 August 2024
21 August 2024
21 August 2024
20 August 2024
20 August 2024
20 August 2024
20 August 2024
20 August 2024
Symaskine Manualer
- Symaskine Sinbo
- Symaskine Ikea
- Symaskine SilverCrest
- Symaskine Toyota
- Symaskine EasyMaxx
- Symaskine Elna
- Symaskine Singer
- Symaskine Juki
- Symaskine Siemens
- Symaskine Husqvarna
- Symaskine AEG
- Symaskine Hugin
- Symaskine Pfaff
- Symaskine Livoo
- Symaskine Brother
- Symaskine Emerio
- Symaskine TriStar
- Symaskine TecLime
- Symaskine Blaupunkt
- Symaskine Privileg
- Symaskine Medion
- Symaskine Kohler
- Symaskine Lifetec
- Symaskine Micromaxx
- Symaskine Lervia
- Symaskine Anker-Bernette
- Symaskine RCE
- Symaskine Mellerware
- Symaskine Bernette
- Symaskine Husqvarna-Viking
- Symaskine Bernina
- Symaskine Ambiano
- Symaskine Dürkopp Adler
- Symaskine Huskystar
- Symaskine Hema
- Symaskine Janome
- Symaskine Prixton
- Symaskine Termozeta
- Symaskine Easy Home
- Symaskine Alfa
- Symaskine Cecotec
- Symaskine Silver
- Symaskine Solac
- Symaskine Primera
- Symaskine Crofton
- Symaskine Jocca
- Symaskine Kenmore
- Symaskine Bestron
- Symaskine Kunft
- Symaskine Union Special
- Symaskine LERAN
- Symaskine Veritas
- Symaskine Yamato
- Symaskine Mistral
- Symaskine Aigger
- Symaskine Jata
- Symaskine Guzzanti
- Symaskine Necchi
- Symaskine Kayser
- Symaskine Carina
- Symaskine Vendomatic
- Symaskine Home Electric
- Symaskine Wëasy
- Symaskine Empisal
- Symaskine Lewenstein
- Symaskine Victoria
- Symaskine Durabase
- Symaskine Meister Craft
- Symaskine Yamata
- Symaskine Łucznik
- Symaskine Prince
- Symaskine Hofmann
- Symaskine Muller
- Symaskine Sinojo
- Symaskine Gritzner
- Symaskine W6
- Symaskine Zippy
- Symaskine Feiyue
- Symaskine Mediashop
- Symaskine ER
- Symaskine Novamatic
- Symaskine Siemssen
- Symaskine Mio Star
- Symaskine SteamMax
Nyeste Symaskine Manualer
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024