Bestway Tobin Sports 65127 Manual

Bestway Støvle Tobin Sports 65127

Læs nedenfor 📖 manual på dansk for Bestway Tobin Sports 65127 (6 sider) i kategorien Støvle. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/6

Name of recreational craft manufacturer: Bestway Inflatables & Material Corp.

Address: No.3065 Cao An Road Shanghai 201812 P.R. China

Town: Post Code: Country: Jiangqiao 201812 China

Name of authorised representative (if applicable): Bestway (Europe) S.r.l.,

Address: Via Resistenza, 5, San Giuliano Milanese(Milano),Italy

Town: Post Code: Country: Milano 20098 Italy

Module used for design and construction assessment:

Name of Notified Body for design and construction assessment (if applicable):

Address:

Town: Post Code: Country: ID Number:

Notified Body certificate1 number (if applicable): Date: / /

Module used for noise emission assessment (if applicable):

Name of Notified Body for noise emission assessment (if applicable):

Address:

Town: Post Code: Country: ID Number:

Notified Body certificate1 number (if applicable): Date: / /

Other Community Directives applied:

DESCRIPTION OF RECREATIONAL CRAFT:

EU Declaration of Conformity of Recreational Craft with the Design, Construction and

Noise Emission requirements of Directive 2013/53/EU

(To be completed by manufacturer or if mandated, authorised representative)

Brand name of the Recreational Craft: Tobin Sports Model or Type: 65127

(Denny • Huang)

C N X B C

Watercraft Identification Number:

A G HA1 B+C B+D B+E B+F

A A1 G H

Type of construction:

Rigid Rigid-Inflatable (RIB)Inflatable

Date and place of issue (dd/mm/yyyy): 2021 / 08 / 01

Hull construction material:

Aluminium, aluminium alloys Moulded Fibre Reinforced Plastic

Steel, steel alloys Wood

Other (specify):

Recreational Craft

Design category(-ies)

related to the

maximum recommended

number of

persons:

Maximum Recommended engine power: 11.2 kW

Installed engine power: kW

Number of propulsion engines: #

Maximum recommended engine mass2: kg

Length of hull L H

: 3.30 m

Beam of hull B H: 1.60 m

Maximum Draught T:

This declaration of conformity is issued under the sole responsibility of the manufacturer. I declare on behalf of the manufacturer that the recreational craft

mentioned above fulfils the requirements specified in Article 4 (1) and Annex I of Directive 2013/53/EU.

(identification of the person empowered to sign on behalf of the manufacturer

or his authorised representative)

(or an equivalent marking)

Name and function: Signature and title: Director of R&D Center

Deck:

Fully enclosed

Partially protected

Open

Type of hull:

MultihullMonohull