Black And Decker IR07XC Manual
Black And Decker
Jern
IR07XC
Læs nedenfor 📖 manual på dansk for Black And Decker IR07XC (2 sider) i kategorien Jern. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/2
Please Read and Save this Use and Care Book.
IMPORTANT SAFEGUARDS.
When using your iron, basic safety precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING.
• Only use iron for its intended use.
• To avoid risk of electric shock, do not immerse the iron in water or other liquids.
• Always turn iron off before plugging or unplugging from the electrical
outlet. Never pull on the cord to disconnect the iron from the electrical
outlet; instead, grasp the plug and pull on the plug to disconnect the iron.
• Do not let the cord touch hot surfaces. Let the iron cool completely before
putting the iron away. Coil the cord loosely around the iron when storing.
• Always disconnect the iron from the electrical outlet before filling the iron
with water, emptying the water from the iron, and when the iron is not in use.
• Do not operate the iron with a damaged cord or in the event the iron has
been dropped or damaged. To avoid the risk of electric shock, do not
disassemble the iron. Take it to a qualified serviceman for examination and
repair. Incorrect assembly might result in a risk of electric shock when the
iron is used after reassembly.
• Close supervision is necessary for any appliance used by or near children.
Do not leave the iron unattended while the iron is connected or on an
ironing board.
• Burns can occur from touching hot metal parts, hot water or steam. Use
caution when you turn a steam iron upside down— there might be hot
water in the reservoir.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• The iron must be used and rested on a stable surface.
• When placing the iron on its stand, ensure that the surface on which the
stand is placed is stable.
• The iron is not to be used if it has been dropped, if there are visible signs of
damage or if it is leaking.
SPECIAL INSTRUCTIONS.
• To avoid a circuit overload, do not operate an iron on the same circuit with
another high wattage appliance.
• If an extension cord is absolutely necessary, a cord with an ampere rating
equal to or greater than the maximum rating of the iron should be used. A
cord rated for less amperage can result in a risk of fire or electric shock
due to overheating. Care shall be taken to arrange the cord so that it cannot
be pulled or be tripped over.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
POLARIZED PLUG (120V MODELS ONLY)
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not attempt to
modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to
prevent removal of the outer cover. To reduce the risk of fire or electric shock,
do not attempt to remove the outer cover. There are no user-serviceable parts
inside. Repair should be done only by authorized service personnel.
Note: If the power cord is damaged, it should be replaced by qualified
personnel; in Latin America, by an authorized service center.
HOW TO USE
This product is for household use only.
GETTING STARTED
• Remove any labels, stickers or tags attached to the body or soleplate of the iron.
• Please go to www.prodprotect.com/applica to register your warranty.
Note: Use ordinary tap water for ironing. Do not use water processed through a
home softening system.
Important: For optimum performance, let the iron
stand for 90 seconds before beginning to iron.
FILLING WATER TANK
1. With iron on flat surface with soleplate down, open
water-fill cover (A).
2. Tilt the iron and using a clean measuring cup, pour
water into opened chamber until water reaches the MAX level mark on the side of
the water tank. Do not overfill.
3. Close the water-fill cover.
4. Plug in the iron. The power indicator light illuminates.
Note: If you need to add water while ironing, unplug the iron and follow above steps.
Tip: If unsure of a garment’s fiber, test a small area (on an inside seam or hem)
before ironing.
3-WAY AUTOMATIC SHUTOFF
The automatic shutoff feature in your iron works as follows:
• Once the iron reaches appropriate temperature,
it will turn off after 30 seconds of inactivity if left
on its soleplate or tipped over on its side. If left
vertically on its heel rest, it will shut off after
8 minutes (B).
• The power indicator light starts blinking to let you
know that the iron has stopped heating.
• As soon as you pick up the iron, it will start heating
again. Wait for iron to reheat completely before resuming operation.
SMART STEAMTM TECHNOLOGY
The Smart SteamTM system automatically produces steam when you turn the
fabric select dial between settings 4 and 6.
SURGE OF STEAM
Horizontal
Tip: Use to remove stubborn creases.
1. With the water tank filled to the MAX mark, set fabric select dial to
appropriate setting (between 4 and 6) for your fabric. See fabric guide on
water tank and read garment’s label to help you determine fabric type.
2. Be sure there is water in the reservoir. Steam is automatically turned off
between settings 0 and 3.
3. For best performance, use surge of steam at 5-second intervals.
4. When finished ironing, turn the fabric select dial to 0 and unplug the iron.
Important: Always stand the iron on its heel rest when powered on but
not in use.
Vertical
Tip: Use for removing wrinkles from hanging clothes and drapes.
1. Be sure the water tank is filled to the MAX mark.
2. Hang the garment to be steamed on a clothes hanger. (Curtains or drapes
can be steamed once they are hung.)
3. Set the fabric select dial to appropriate setting (between 4 and 6) for your fabric.
4. Hold the iron close to, but not touching, the fabric.
5. Pull the fabric tight in your free hand and press the button as you move the
iron over the fabric.
USING SPRAY
Tip: Use to dampen tough wrinkles at any setting.
1. Be sure the iron is filled with water.
2. On first use, pump the button several times.
ANTI DRIP SYSTEM
The anti drip system prevents water spotting at low temperatures.
DRY IRONING
1. Turn the fabric select dial to setting 1, 2, or 3 to iron without steam.
XPRESS STEAM™ IRON
Product may vary slightly from what is illustrated.
1. Spray nozzle
2. Water-fill cover
3. Fabric select dial
4. Steam button
5. Spray button
6. Power indicator light
7. Handle
8. 360° pivoting cord
9. Slip-resistant heel
10. Fabric guide
11. Translucent water tank
12. Auto CleanTM
button
13. Soleplate
© 2013 Applica Consumer Products, Inc.
is a registered trademark of The Black & Decker Corporation,
Towson, Maryland, USA
Made and Printed in People’s Republic of China
USA/Canada 1-800-231-9786
Accessories/Parts 1-800-738-0245
Register your product at www.prodprotect.com/applica
R2 2012/5-15-100 E/F
Model: IR05XC, 6XC, 7XC, 8XC
www.prodprotect.com/applica
HOW TO USE (CONT)DRY IRONING
2. To dry iron at higher settings, empty the water from the reservoir to
prevent steaming.
EMPTYING WATER TANK (OPTIONAL)
1. Unplug the iron and let it cool.
2. To release the water, hold the iron over a sink with the tip pointing down
and to one side. Water will empty out of the water-fill opening.
CARE AND CLEANING
This product contains no user serviceable parts. Refer service to qualified service
personnel.
CLEANING OUTSIDE SURFACES
Make sure iron is unplugged and has cooled completely. Wipe the soleplate
and outersurfaces with a soft cloth dampened with water. Add mild household
detergent. Neve ruse abrasives, heavy-duty cleansers, vinegar or scouring
pads that may scratch or discolor the iron. After cleaning, steam iron over an
old cloth to remove any residue from the steam vents.
AUTO CLEANTM SYSTEM
Tip: To keep the steam vents free of any buildup, follow these instructions
about once a month:
1. Fill the water tank well below the MAX line. Plug in the iron.
2. Turn the fabric select dial to 6 and stand the iron on its heel rest. Allow it to heat.
3. Turn fabric select dial to 0, unplug the iron and hold over a sink with the
soleplate facing down.
4. Press and hold the AUTO CLEANTM button. Be careful, as hot water and steam
will come out of the steam vents. Continue to hold the AUTO CLEANTM button until
all the water has emptied. If necessary, rock iron side-to-side and front-to-back.
5. When finished, release the button, stand the iron on its heel rest and plug it
in. Heat for about 2 minutes to dry out any remaining water.
STORING YOUR IRON
1. Unplug the iron and allow it to cool.
2. Check that the selector is set to 0.
3. Store vertically on its heel to prevent water leaking from the soleplate.
NEED HELP?
For service, repair or any questions regarding your appliance, call the
appropriate 800 number on the cover of this book. return the product Do not
to the place of purchase. Also, please mail product back to the Do not
manufacturer, nor bring it to a service center. You may also want to consult
the website listed on the cover of this manual.
Two-Year Limited Warranty
(Applies only in the United States and Canada)
What does it cover?
• Any defect in material or workmanship provided; however, Applica’s liability
will not exceed the purchase price of the product.
For how long?
• Two years from the date of original purchase with proof of such purchase.
What will we do to help you?
• Provide you with a reasonably similar replacement product that is either
new or factory refurbished.
How do you get service?
• Save your receipt as proof of date of sale.
• Check our on-line service site at www.prodprotect.com/applica, or call our
toll-free number, 1-800-231-9786, for general warranty service.
• If you need parts or accessories, please call 1-800-738-0245.
What does your warranty not cover?
• Damage from commercial use
• Damage from misuse, abuse or neglect
• Products that have been modified in any way
• Products used or serviced outside the country of purchase
• Glass parts and other accessory items that are packed with the unit
• Shipping and handling costs associated with the replacement of the unit
• Consequential or incidental damages (Please note, however, that some
states do not allow the exclusion or limitation of consequential or incidental
damages, so this limitation may not apply to you.)
How does state law relate to this warranty?
• This warranty gives you specific legal rights, and you may also have other
rights that vary from state to state or province to province.
A
B
8 minutes
30 seconds
10111213
8
9
1 2 3
4 5 6 7
Produkt Specifikationer
| Mærke: | Black And Decker |
| Kategori: | Jern |
| Model: | IR07XC |
Har du brug for hjælp?
Hvis du har brug for hjælp til Black And Decker IR07XC stil et spørgsmål nedenfor, og andre brugere vil svare dig
Jern Black And Decker Manualer
6 Oktober 2024
4 Oktober 2024
1 Oktober 2024
30 September 2024
22 September 2024
16 September 2024
16 September 2024
14 September 2024
5 September 2024
16 August 2024
Jern Manualer
- Jern DeLonghi
- Jern Sinbo
- Jern Bosch
- Jern SilverCrest
- Jern OBH Nordica
- Jern Sencor
- Jern Singer
- Jern Siemens
- Jern Breville
- Jern Panasonic
- Jern Gorenje
- Jern VOX
- Jern Miele
- Jern Philips
- Jern Concept
- Jern Vitek
- Jern LG
- Jern AEG
- Jern Electrolux
- Jern Shark
- Jern Elica
- Jern Braun
- Jern Hotpoint
- Jern Melissa
- Jern Hoover
- Jern Korona
- Jern Arçelik
- Jern ProfiCare
- Jern Grundig
- Jern Livoo
- Jern Klarstein
- Jern Tefal
- Jern Trisa
- Jern Princess
- Jern Emerio
- Jern Moulinex
- Jern Sunbeam
- Jern Westinghouse
- Jern Hyundai
- Jern Proctor Silex
- Jern Jura
- Jern Imetec
- Jern TriStar
- Jern Clas Ohlson
- Jern Adler
- Jern Camry
- Jern Blaupunkt
- Jern Tomado
- Jern AEG-Electrolux
- Jern Becken
- Jern BEKO
- Jern Privileg
- Jern Alpina
- Jern Clatronic
- Jern Quigg
- Jern Hitachi
- Jern Rowenta
- Jern Fagor
- Jern Haier
- Jern AFK
- Jern Bomann
- Jern Morphy Richards
- Jern Russell Hobbs
- Jern Ariete
- Jern Innoliving
- Jern Maxim
- Jern Zelmer
- Jern Leifheit
- Jern Vivax
- Jern JML
- Jern Calor
- Jern Sunny
- Jern Telefunken
- Jern Primo
- Jern Orbegozo
- Jern Optimum
- Jern Taurus
- Jern Exquisit
- Jern Elba
- Jern MPM
- Jern Profilo
- Jern Tesla
- Jern G3 Ferrari
- Jern Domo
- Jern BEEM
- Jern GlobalTronics
- Jern Swann
- Jern Thomas
- Jern Hamilton Beach
- Jern Ambiano
- Jern Unold
- Jern Nevir
- Jern Ursus Trotter
- Jern Inventum
- Jern Cleanmaxx
- Jern Swan
- Jern Khind
- Jern Frigidaire
- Jern SVAN
- Jern Scarlett
- Jern Izzy
- Jern ECG
- Jern Nova
- Jern Saturn
- Jern Eldom
- Jern Maxwell
- Jern H.Koenig
- Jern Proline
- Jern Waves
- Jern Termozeta
- Jern Laurastar
- Jern Easy Home
- Jern Polti
- Jern Eta
- Jern Turmix
- Jern Orion
- Jern Rotel
- Jern Kalorik
- Jern Cecotec
- Jern Solac
- Jern CHI
- Jern Beper
- Jern Tower
- Jern Team
- Jern Jocca
- Jern Brentwood
- Jern Duronic
- Jern Bestron
- Jern Philco
- Jern Kunft
- Jern Arzum
- Jern LERAN
- Jern Conair
- Jern Hacienda
- Jern Andis
- Jern Oster
- Jern Jocel
- Jern Ufesa
- Jern DPM
- Jern Create
- Jern Flama
- Jern Kambrook
- Jern Jata
- Jern Aigostar
- Jern Heinner
- Jern Defy
- Jern First Austria
- Jern Drew & Cole
- Jern Qilive
- Jern Lümme
- Jern Johnson
- Jern Koblenz
- Jern Essentiel B
- Jern Gallet
- Jern Zephir
- Jern Superior
- Jern Grunkel
- Jern Coline
- Jern Elta
- Jern Imarflex
- Jern Lelit
- Jern Girmi
- Jern Zomix
- Jern Vanguard
- Jern Domena
- Jern Eudora
- Jern Elgento
- Jern High One
- Jern Lagrange
- Jern Robinhood
- Jern LAFE
- Jern Inno-Hit
- Jern Britania
- Jern Vaporella
- Jern Kleva
- Jern Steamfast
- Jern Michelini
Nyeste Jern Manualer
10 December 2024
9 December 2024
8 December 2024
8 December 2024
7 December 2024
6 December 2024
6 December 2024
6 December 2024
6 December 2024
6 December 2024