Black And Decker JS700BL Manual
Black And Decker
Sav
JS700BL
Læs nedenfor 📖 manual på dansk for Black And Decker JS700BL (5 sider) i kategorien Sav. Denne guide var nyttig for 61 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/5
INSTRUCTION MANUAL
Catalog Number JS700
SAVE THIS
SAVE THIS
SAVE THIS
SAVE THIS SAVE THIS MANUAL FOR
MANUAL FOR
MANUAL FOR
MANUAL FOR MANUAL FOR FUTURE REFERENCE.
FUTURE REFERENCE.
FUTURE REFERENCE.
FUTURE REFERENCE.FUTURE REFERENCE.
VEA EL
VEA EL
VEA EL
VEA EL VEA EL ESPAÑOL EN
ESPAÑOL EN
ESPAÑOL EN
ESPAÑOL EN ESPAÑOL EN LA CONTRAPORTADA.
LA CONTRAPORTADA.
LA CONTRAPORTADA.
LA CONTRAPORTADA.LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA:
LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
CAT. NO. JS700 FORM NO. 587384-00 Copyright Black & Decker © 2004 (Apr 04) Printed in China
GENERAL SAFETY RULES AND INSTRUCTIONS FOR
ALL TOOLS
WARNING: Read and understand all instructions. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious personal
injury. SAVE THESE INSTRUCTIONS
Work Area
• Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust
or fumes.
• Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.
Electrical Safety
• Double insulated tools are equipped with a polarized plug (one blade is wider than
the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install a polarized outlet. Do not change the plug in any way. Double
Insulation eliminates the need for the three wire grounded power cord and grounded
power supply system.
• Avoid body contact with grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is grounded.
• Don’t expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
• Do not abuse the cord. Never use the cord to carry the tools or pull the plug from
an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace
damaged cords immediately. Damaged cords increase the risk of electric shock.
• When operating a power tool outside, use an outdoor extension cord marked "W-A"
or "W." These cords are rated for outdoor use and reduce the risk of electric shock.
Personal Safety
• Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use tool while tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating power tools may result in serious
personal injury.
• Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your
hair, clothing, and gloves away from moving parts. Loose clothing, jewelry, or long
hair can be caught in moving parts. Air vents cover moving parts and should be avoided.
• Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with
your finger on the switch or plugging in tools that have the switch on invites accidents.
• Remove adjusting keys or wrenches before turning the tool on. A wrench or key that
is left attached to a rotating part of the tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. Proper footing and
balance enables better control of the tool in unexpected situations.
• Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes,
hard hat, or hearing protection must be used for appropriate conditions.
Tool Use and Care
• Use clamps or other practical way to secure and support the workpiece to a stable
platform. Holding the work by hand or against your body is unstable and may lead to
loss of control.
• Do not force tool. Use the correct tool for your application. The correct tool will do the
job better and safer at the rate for which it is designed.
• Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled
with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing the tool. Such preventative safety measures reduce
the risk of starting the tool accidentally.
• Store idle tools out of reach of children and other untrained persons. Tools are
dangerous in the hands of untrained users.
• Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained
tools, with sharp cutting edges are less likely to bind and are easier to control.
• Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tools operation. If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
• Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool, may become hazardous when used on
another tool.
Service
• Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
• When servicing a tool, use only identical replacement parts. Follow instructions in
the Maintenance section of this manual. Use of unauthorized parts or failure to follow
Maintenance Instructions may create a risk of electric shock or injury.
Specific Safety Rules
• Hold tool by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will
make exposed metal parts of the tool "live" and shock the operator.
•Keep hands away from cutting area. Never reach underneath the material for any
reason. Hold front of saw by grasping the contoured gripping area. Do not insert fingers or
thumb into the vicinity of the reciprocating blade and blade clamp. Do not stabilize the
saw by gripping the shoe.
•Keep blades sharp. Dull blades may cause the saw to swerve or stall under pressure.
•When cutting pipe or conduit ensure that they are free from water, electrical wiring,
etc.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber (CCA).
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,
and other construction activities. Wear protective clothing and wash exposed areas
with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may
promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disperse dust, which may cause
serious and permanent respiratory or other injury. Always use NIOSH/OSHA
approved respiratory protection appropriate for the dust exposure. Direct particles
away from face and body.
CAUTION: Wear appropriate hearing protection during use. Under some
conditions and duration of use, noise from this product may contribute to hearing loss.
The label on your tool may include the following symbols.
V................ A ............amperesvolts
Hz.............. ............wattshertz W
min ............minutes alternating current
..........direct current no ..........no load speed
............Class II Construction ..........earthing terminal
..............safety alert symbol .../min ........revolutions or
reciprocations per minute
Features - JS700
1. On/Off switch
2. Lock-on button
3. Variable Speed control knob
4. Saw blade locking lever
5. AccuCutTM saw blade support roller
6. Support roller adjustment screw
7. Saw blade
8. Scroller knob
9. Mode selector
10. Shoe plate
11. Shoe plate locking knob
12. Saw blade storage compartment
13. Dust blower
14. Dust extraction adaptor
AB
CD
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-800-544-6986
IF YOU SHOULD EXPERIENCE A PROBLEM
WITH YOUR BLACK & DECKER PRODUCT,
C
C
C
CCA
A
A
AAL
L
L
LLL
L
L
LL
1
1
1
11-
-
-
--8
8
8
880
0
0
000
0
0
00-
-
-
--5
5
5
554
4
4
444
4
4
44-
-
-
--6
6
6
669
9
9
998
8
8
886
6
6
66
BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG No. ,
TYPE No., AND DATE CODE. IN MOST CASES, ABLACK & DECKER R E P R E S E N TATIVE CAN
R E S O LVE THE PROBLEM OVER THE PHONE. IF YOU HAVE A SUGGESTION OR COMMENT,
GIVE US A CALL. YOUR FEEDBACK IS VITA L TO BLACK & D E C K E R .
Produkt Specifikationer
| Mærke: | Black And Decker |
| Kategori: | Sav |
| Model: | JS700BL |
Har du brug for hjælp?
Hvis du har brug for hjælp til Black And Decker JS700BL stil et spørgsmål nedenfor, og andre brugere vil svare dig
Sav Black And Decker Manualer
28 Juni 2024
28 Juni 2024
22 Maj 2024
20 Maj 2024
6 Maj 2024
1 Maj 2024
23 April 2024
22 Februar 2024
22 Februar 2024
9 Februar 2024
Sav Manualer
- Sav Scheppach
- Sav Bosch
- Sav Ozito
- Sav Guede
- Sav Stiga
- Sav Panasonic
- Sav Metabo
- Sav Martha Stewart
- Sav DeWalt
- Sav Husqvarna
- Sav RYOBI
- Sav Silverline
- Sav Skil
- Sav Mafell
- Sav AEG
- Sav Gardena
- Sav AL-KO
- Sav Zipper
- Sav Stihl
- Sav McCulloch
- Sav Makita
- Sav Worx
- Sav Dolmar
- Sav Garden
- Sav Güde
- Sav Biltema
- Sav Jonsered
- Sav Vonroc
- Sav Hyundai
- Sav Milwaukee
- Sav Parkside
- Sav FERM
- Sav Trotec
- Sav Einhell
- Sav Proxxon
- Sav Stanley
- Sav Hikoki
- Sav Hilti
- Sav Hitachi
- Sav Kress
- Sav Remington
- Sav Park & Garden
- Sav Elu
- Sav Festool
- Sav Echo
- Sav EGO
- Sav Partner
- Sav Powerworks
- Sav Texas
- Sav Dremel
- Sav Kinzo
- Sav Powerfix
- Sav Elektra Beckum
- Sav Ford
- Sav Craftsman
- Sav Powerplus
- Sav Gamma
- Sav Westfalia
- Sav Genesis
- Sav Pattfield
- Sav Fieldmann
- Sav Cobra
- Sav Spear & Jackson
- Sav Porter-Cable
- Sav Baumr-AG
- Sav BabyGO
- Sav Ridgid
- Sav Sun Joe
- Sav Cotech
- Sav Snow Joe
- Sav Hobart
- Sav Royal Catering
- Sav Yard Force
- Sav Evolution
- Sav Ferrex
- Sav Fuxtec
- Sav RIKON
- Sav Extralink
- Sav Cocraft
- Sav Maestro
- Sav Yellow Garden Line
- Sav Wolfcraft
- Sav Mac Tools
- Sav Workzone
- Sav Tryton
- Sav Sovereign
- Sav Varo
- Sav Batavia
- Sav Protool
- Sav Stalco
- Sav Triton
- Sav Lux Tools
- Sav Anova
- Sav Fleurelle
- Sav Dual Saw
- Sav Toolson
- Sav Dexter Power
- Sav Toledo
- Sav Graule
- Sav Exakt
- Sav Mac Allister
- Sav MSW
- Sav Prowork
- Sav Lawn Star
Nyeste Sav Manualer
14 December 2024
14 December 2024
14 December 2024
14 December 2024
4 December 2024
4 December 2024
4 December 2024
4 December 2024
2 December 2024
24 November 2024