Black And Decker RO410 Manual
Black And Decker
Rysteplaster
RO410
Læs nedenfor 📖 manual på dansk for Black And Decker RO410 (6 sider) i kategorien Rysteplaster. Denne guide var nyttig for 38 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/6
General Safety Rules
WARNING: Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in electric shock,
fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (cord-
ed) power tool or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of ammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the inuence of
drugs, alcohol or medication. A moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, nonskid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before
connecting to power source and/ or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch or energizing power tools
that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables bet-
ter control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your application. The cor-
rect power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s oper-
ation. If damaged, have the power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cut-
ting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to be per-
formed. Use of the power tool for operations different from those intended could result
in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualied repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
SPECIFIC SAFETY RULES
Hold power tools by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will
make exposed metal parts of the tool “live” and shock the operator.
Always use proper eye protection and a respirator when sanding.
Use clamps or another practical way to secure and support the work piece to a
stable platform. Holding the work by hand or against your body leaves it unstable and
may lead to loss of control.
Sanding of lead-based paint is not recommended. Sanding Lead Based Paint See for
additional information before sanding paint.
Clean your tool out periodically.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to the State of California to
cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
designed to filter out microscopic particles.
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,
and other construction activities. Wear protective clothing and wash exposed areas
with soap and water.
promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disperse dust, which may cause
serious and permanent respiratory or other injury. Always use NIOSH/OSHA
approved respiratory protection appropriate for the dust exposure. Direct particles
away from face and body.
WARNING: ALWAYS use safety glasses. Everyday eye glasses are NOT safety
glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS WEAR
CERTIFIED SAFETY EQUIPMENT:
•ANSI Z87.1 eye protection (CAN/CSA Z94.3)
•ANSI S12.6 (S3.19) hearing protection
•NIOSH/OSHA/MSHA respiratory protection
CAUTION: Wear appropriate hearing protection during use. Under some conditions
Printed in China
VEA EL ESPA OL EN LA CONTRAPORTADA.Ñ
SAVE THIS MANUAL FOR FUTURE REFERENCE.
ADVERTENCIA:
INSTRUCTION MANUAL
Palm Grip Sander
Catalog No. RO400G, RO410
12
3 4
KEY INFORMATION YOU SHOULD KNOW:
the base.
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-800-544-6986
o AND
DATE CODE . BLACK & DECKER
T B & D !hank you for choosing lack ecker
go To www lackanD ecker com ew wner .B D . /n o
To regisTer your new proDucT .
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains
are used to help you recognize this information.
DANGER:
in death or serious injury.
WARNING:
result in death or serious injury.
CAUTION:
result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous situation
65
Produkt Specifikationer
| Mærke: | Black And Decker |
| Kategori: | Rysteplaster |
| Model: | RO410 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Black And Decker RO410 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Rysteplaster Black And Decker Manualer
23 Maj 2024
14 Maj 2024
7 Maj 2024
19 April 2024
14 April 2024
5 April 2024
4 April 2024
18 Marts 2024
5 Marts 2024
3 Marts 2024
Rysteplaster Manualer
- Rysteplaster Scheppach
- Rysteplaster Bosch
- Rysteplaster Ozito
- Rysteplaster Metabo
- Rysteplaster DeWalt
- Rysteplaster RYOBI
- Rysteplaster Silverline
- Rysteplaster Skil
- Rysteplaster AEG
- Rysteplaster Makita
- Rysteplaster Worx
- Rysteplaster Güde
- Rysteplaster Biltema
- Rysteplaster Vonroc
- Rysteplaster Milwaukee
- Rysteplaster Parkside
- Rysteplaster Power Craft
- Rysteplaster Trotec
- Rysteplaster Einhell
- Rysteplaster Proxxon
- Rysteplaster Stanley
- Rysteplaster Hikoki
- Rysteplaster Hilti
- Rysteplaster Hitachi
- Rysteplaster Festool
- Rysteplaster Dremel
- Rysteplaster Fein
- Rysteplaster Craftsman
- Rysteplaster Powerplus
- Rysteplaster Fieldmann
- Rysteplaster Porter-Cable
- Rysteplaster Ridgid
- Rysteplaster Cotech
- Rysteplaster Handwerk
- Rysteplaster RIKON
- Rysteplaster Holzmann
- Rysteplaster Cocraft
- Rysteplaster Maestro
- Rysteplaster Mac Tools
- Rysteplaster Workzone
- Rysteplaster Tryton
- Rysteplaster Stalco
- Rysteplaster Prowork
Nyeste Rysteplaster Manualer
4 December 2024
23 November 2024
22 November 2024
15 November 2024
24 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
11 September 2024