Black And Decker RS600 Manual
Black And Decker
Sav
RS600
Læs nedenfor 📖 manual på dansk for Black And Decker RS600 (6 sider) i kategorien Sav. Denne guide var nyttig for 17 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/6
General Safety Rules
WARNING: Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in electric shock,
fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (cord-
ed) power tool or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of ammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the inuence
of drugs, alcohol or medication. A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, nonskid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before
connecting to power source and/ or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch or energizing power tools
that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your application. The cor-
rect power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s oper-
ation. If damaged, have the power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualied repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Specific Safety Rules
• Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory may contact hidden wiring or its own cord. Cutting
accessory contacting a “live” wire may make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
• Use clamps or another practical way to secure and support the workpiece to a
stable platform. Holding the work by hand or against your body leaves it unstable and
may lead to loss of control.
•Keep hands away from cutting area. Never reach underneath the material for any reason.
Hold front of saw by grasping the contoured gripping area. Do not insert fingers or thumb
into the vicinity of the reciprocating blade and blade clamp. Do not stabilize the saw by
gripping the shoe.
Dull blades may cause the saw to swerve or stall under pressure.
and pay particular attention to overhead wires which
may be hidden from view. Anticipate the path of falling branches and debris ahead of time.
ensure that they are free from water, electrical wiring, etc.
•leadfromlead-basedpaints,
•crystallinesilicafrombricksandcementandothermasonryproducts,and
•arsenicandchromiumfromchemically-treatedlumber(CCA).
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
Allowing dust to get into your mouth, eyes, or lay on the
skin may promote absorption of harmful chemicals.
. Always use NIOSH/OSHA
approved respiratory protection appropriate for the dust exposure. Direct particles
away from face and body.
Under some conditions
and duration of use, noise from this product may contribute to hearing loss
The label on your tool may include the following symbols.
V
..................
volts A
...................
amperes
Hz watts
................
hertz W ..................
min minutes
..............
or AC
......
alternating current
or DC.....direct current n
o
.................
no load speed
................Class I Construction earthing terminal..................
(grounded) ................safety alert symbol
................Class II Construction .../min or rpm
....
revolutions or reciprocation
(double insulated) per minute
SPM
............
Strokes per minute
RECIPROCATING SAW - Cat. No. RS600, RS601
CAT. NO. RS600, RS601 FORM NO. 90590178
Copyright © 2012 Black & Decker Sept. 2012 Printed in China
4
5
TRIGGER SWITCH
INTERRUPTEUR À DÉTENTE
GATILLO INTERRUPTOR
21
3 3A
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
If you have a question or experience a problem with your Black & Decker purchase, go to
If you can’t find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. -- Fri. to speak with an agent.
Please have the catalog number available when you call.
for instant answers 24 hours a day.
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains
relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below
are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a potentially haz ard ous situation which, if not avoided, may
result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous situation
which, if not avoided, may result in property damage.
Produkt Specifikationer
| Mærke: | Black And Decker |
| Kategori: | Sav |
| Model: | RS600 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Black And Decker RS600 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Sav Black And Decker Manualer
28 Juni 2024
28 Juni 2024
22 Maj 2024
20 Maj 2024
6 Maj 2024
1 Maj 2024
23 April 2024
22 Februar 2024
22 Februar 2024
9 Februar 2024
Sav Manualer
- Sav Scheppach
- Sav Bosch
- Sav Ozito
- Sav Guede
- Sav Stiga
- Sav Panasonic
- Sav Metabo
- Sav Martha Stewart
- Sav DeWalt
- Sav Husqvarna
- Sav RYOBI
- Sav Silverline
- Sav Skil
- Sav Mafell
- Sav AEG
- Sav Gardena
- Sav AL-KO
- Sav Zipper
- Sav Stihl
- Sav McCulloch
- Sav Makita
- Sav Worx
- Sav Dolmar
- Sav Garden
- Sav Güde
- Sav Biltema
- Sav Jonsered
- Sav Vonroc
- Sav Hyundai
- Sav Milwaukee
- Sav Parkside
- Sav FERM
- Sav Trotec
- Sav Einhell
- Sav Proxxon
- Sav Stanley
- Sav Hikoki
- Sav Hilti
- Sav Hitachi
- Sav Kress
- Sav Remington
- Sav Park & Garden
- Sav Elu
- Sav Festool
- Sav Echo
- Sav EGO
- Sav Partner
- Sav Powerworks
- Sav Texas
- Sav Dremel
- Sav Kinzo
- Sav Powerfix
- Sav Elektra Beckum
- Sav Ford
- Sav Craftsman
- Sav Powerplus
- Sav Gamma
- Sav Westfalia
- Sav Genesis
- Sav Pattfield
- Sav Fieldmann
- Sav Cobra
- Sav Spear & Jackson
- Sav Porter-Cable
- Sav Baumr-AG
- Sav BabyGO
- Sav Ridgid
- Sav Sun Joe
- Sav Cotech
- Sav Snow Joe
- Sav Hobart
- Sav Royal Catering
- Sav Yard Force
- Sav Evolution
- Sav Ferrex
- Sav Fuxtec
- Sav RIKON
- Sav Extralink
- Sav Cocraft
- Sav Maestro
- Sav Yellow Garden Line
- Sav Wolfcraft
- Sav Mac Tools
- Sav Workzone
- Sav Tryton
- Sav Varo
- Sav Batavia
- Sav Protool
- Sav Stalco
- Sav Triton
- Sav Lux Tools
- Sav Anova
- Sav Fleurelle
- Sav Dual Saw
- Sav Toolson
- Sav Dexter Power
- Sav Toledo
- Sav Graule
- Sav Exakt
- Sav Mac Allister
- Sav MSW
- Sav Prowork
Nyeste Sav Manualer
17 November 2024
17 November 2024
16 November 2024
15 November 2024
15 November 2024
14 November 2024
3 November 2024
22 Oktober 2024
20 Oktober 2024
20 Oktober 2024