Blackburn Helmet Mirror Manual


Læs nedenfor 📖 manual på dansk for Blackburn Helmet Mirror (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Visit us at blackburndesign.com for product updates.
Self-adhesive discs
Set screw
Arm
Mirror
Pivot
Mirror base
STEP ONE: Carefully position and press
adhesive disc into place on the back of
the mirror base.
STEP TWO: With helmet on your head,
position the mirror on the left side of your
helmet. Choose a relatively flat section.
Once you have the reflection required, remove
adhesive backing and press mirror firmly in place.
FOR ADJUSTMENT: A set screw inside the pivot enables the arm to
keep the mirror in your selected position. It may become necessary to
tighten this screw with a 3mm allen wrench. Simply snap the pivot off
the mirror base and tighten from the inside. Be careful to not
overtighten as it may strip the threads inside the pivot.
WARNING: Objects in the mirror are closer than they appear.
HELMET MIRROR
Small, Light and Fully Adjustable
Part# 2020203
5550 Scotts Valley Drive, Scotts Valley, Ca 95066
Customer Service: 1-800-456-2355
Blackburndesign.com
Printed in China


Produkt Specifikationer

Mærke: Blackburn
Kategori: Ikke kategoriseret
Model: Helmet Mirror

Har du brug for hjælp?

Hvis du har brug for hjælp til Blackburn Helmet Mirror stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Blackburn Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer