Boss 455BRGB Manual

Boss Ikke kategoriseret 455BRGB

Læs nedenfor 📖 manual på dansk for Boss 455BRGB (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
noitallatsnInoitallatsnI
Installation Procedures
First complete the electrical connections and then check for correctness.
Insert mounting collar into the dashboard and bend the mounting
tabs out with a screwdriver.
Make sure that lock lever is flush with the mounting collar( not
projecting outward).
- BASS/TREBLE:-7, -6, ~, 1, 0, +1,~, +6, +7
- BALANCE:L7, L6,~, L1, 0, R1,~,R6, R7
- FADER:R7, R6, ~, R1, 0, F1, ~ ,F6, F7
- EQ(Equalizer) Setting: OFF, CLASS, ROCK, POP, FLAT
- Loudness: LOUD ON/OFF
- DX/LOCAL: Enables or disables the local broadcast mode (LOCAL).
- Stereo/Mono: Switches between MONO and STEREO reception mode
for radio frequencies.
- CLOCK 12/24: Select between 12 hours and 24 hours display.
Note: If 12 hour display is selected , AM= Morning; PM= Afternoon
- AREA US/EU: This car radio is equipped the USA / Europe frequency.
Rotate the volume knob to switch between USA and Europe frequency.
The system will change the frequency setting in about 3 seconds.
- 7 color-changing illumination in buttons:
This car radio device is equipped 7 color-changing illumination in buttons.
The illumination color can be preset Auto(color automatically change one
by one), blue, red, Cyan, Green, Purple, Yellow, White.
VOL knob to adjust the selected item.
Setting the Clock
Press and hold the button to display time. Press the button, theCLK CLK
hours digits start flashing on the display. Set hours by pressing the and
button. Then briefly press the button. The minute digits start flashing. CLK
Set minutes by pressing the and .
Finally press the button to confirm your settings.CLK
LCD Display
Mute On/Off
In power on mode, briefly press the button to toggle mute on or off. MUTE
USB Port
Hands-free Microphone
Auxiliary Input Jack
Reset
Push the button with a thin object with a pointed end to reset allRESET
parameters to factory default settings.This function may be used when the
LCD does not display normally or sound is distorted, or when any of controls
are disabled.
Connect all wiring harness and slide the head unit into the mounting
collar until it clicks into place.
Turn Unit on/off, Change the Source
Press the button to turun on the unit. Press and hold the /SRC /SRC
button to turn off the unit.
Press the button to select the different modes: Radio, USB(with/SRC
USB device inserted), AUX-IN(auxiliary input) and BT(Bluetooth) modes.
Adjust the volume (VOL)
Rotate the knob to increase or decrease the volume level.VOL
Adjust Menu Options (SEL)
SEL button repeatedly to cycle through the following adjustable
audio functions:
Installation Opening
This unit can be installed in any dashboard Having an opening as shown
below.
2.05 inch
7.20 inch
- Only use speakers with 4 ohms impedance.
- +12V DC Negative Ground.
- The maximum current of the Amp remote trigger is 200mA.
!
Wiring Connections
15
White:Front Left PRE-AMP Output
Red: Front Right PRE-AMP Output
White: Rear Left PRE-AMP Output
Red: Rear Right PRE-AMP Output
Radio Antenna
ACC + (Red)
GND - (Black)
ANT + (Blue)
Power B + (Yellow)
15A
Purple
Rear Right Speaker
Front Right Speaker
Rear Left Speaker
Front Left Speaker
Purple/Black Green/Black
White
White/Black
Gray
Gray/Black
Green
Overview of the Components
General Operation
General Operation Radio Operation
Switch Between USA area and Europe area Frequency
In radio mode, press the button to enter the switch state of the USSEL
(USA) and EU(europe)frequency, then rotate it to switch between US(USA)
and EU(europe) frequency. The system will change the frequency setting in
about 3 seconds.
Change Bands
In radio mode, shortly press the button to switch between theBAND/AMS
FM1(F1), FM2(F2), FM3(F3) and AM1(A1), AM2(A2) bands.
To Store / Recall Preset Stations
The radio can be stored 6 preset stations for each band (FM1, FM2, FM3,
AM1 and AM2) for atotal of 30 preset stations.
- To memorize a station:
Press and hold the desired preset buttons (1-6) to save a radio station.
- To recall a preset station:
Briefly press the respective station button (1-6) to recall the corresponding
preset station.
Manual Tuning
In the radio mode:
Press and hold the or button to enter the manual tuning mode.
In manual tuning mode, briefly press the or button to search the next
or previous frequency step by step.
Seek Tuning
In radio mode, press the or button, the automatic search will start, it
will search upward or downward for the strong signal radio station within the
cuttent band. The auto searching will stop until find a station.
Automatic Store Preset station (AMS)
Press and hold the button to store 18 FM stations and 12 AMBAND/AMS
stations automatically.
USB Operation
If you would like to playback files contained in a USB stick, please insert the
stick into the USB port. The MP3/WMA files will be played automatically.
Note: The USB port of this car radio is also designed for charging for iPhone /
android mobile phone. The charging current consumption is 1 ampere.
Select Next Track or Previous Track
In the USB mode, briefly press the or button to play the the next or
previou track.
Faste Forward/Reverse
Press and hold the or button to fast forward or reverse a track.
Play / Pause
Press the button to interrupt the playback of a music (pause function).
Press this button again to continue the playback.
Introduction Scan
Press the button to play the first 10 seconds of all track. INT
Press again to stop theintroduction scan, and play the current track.
Repeating the track
Press the button to toggle between RPT ALL (Play all track), RPT FLRRPT
(Continuously repeats all tracks in current folder) and RPT ONE
(Continuously repeats current track).
Playing all tracks in random
Press the button.RDM A random playback of all tracks will start.
Press the button again to set the normal playback.
Track/Folder Navigation
- Press the buttons to jump 10 tracks backward or forward. -10/+10
It is required that over 10 tracks be available on the storage medium.
- Press and hold the / button to select the previous or the next folder. -10 +10
(If there are folders on the storage medium.)
Select the track or file for playback in MP3 format
a) Press and hold the button to enter track search mode. BND AMS/
First “TRK0000“ will appear on the display.
b) Rotate the volume knob and select the “first number”. Then press the
c) When the desired track number appears, confirm your selection by
pressing button.SEL
If no any operation in 5 seconds,it will play the current track.
Using this socket, it is possible to hear the sound of other playback devices
such as MP3 players, CD players etc. through the car loudspeaker.
1. Please connect the external device with a 3.5 mm stereo jack plug to the
AUX socket.
2. Press the button repeatedly until “AUX IN” appears in the display.SRC
3. You hear the playback from the external device via the loudspeakers.
You can adjust the volume of the external device to a comfortable level with
the volume control of this device.
Auxiliarly Operation
Bluetooth Operation
Pair and Connect
Prior to using the Bluetooth device as a handsfree system for a Bluetooth
enabled mobile phone for the first time, you must pair and connect the two
devices as follows:
1. In any mode, prior to pairing and connecting, the BT logo in the LCD
indicating that no device is connected. To begin pairing, enable BT mode
on your mobile phone.
2. When the phone finds the car audio system, the “BOSS 455BRGB” name
will be displayed.
3. Choose the “BOSS 455BRGB” from the device list to pair and connect with
the car audio system. Upon confirming, the BT logo will stop flashing.
4. When pairing is complete, the mobile phone audio will automatically
transfer to the car audio system whenever a call is made or received, or
when the mobile phone plays music.
Make a Call
To make a call, dial the call directly from the paired mobile phone.
Redial Last Dialed Number
Press and hold the button on the control panel to redial the last dialed
phone number.
Answer a Call
on the LCD.
Reject or End a Call
To reject or end the call, press the button on the front panel or remote
control.
Bluetooth Operation
Switch Audio Between Car Audio and mobile Phone
During a call, press the VOL knob/button to switch the audio source from the
car audio system back to your mobile phone.
Adjust Call Volume
VOL knob to adjust the call volume level.
Audio Streaming (A2DP)
The unit supports A2DP (advanced audio distribution profile) wireless
streaming audio from your Bluetooth mobile device directly to your head unit.
You can also control your music from the front panel of the head unit using
AVRCP (audio video remote control profile).
1. After pairing, connecting and enabling streaming audio from a compatible
mobile device,
press the button to enter BT mode and display pause on the LCDSRC
display.
2. When a mobile device is paired, music played through that device will
automatically be heard through the car audio system and display A2DP in
the LCD display.
3. Press the or button to play the next or previous on the mobile
phone.
4. Press the button to pause or resume music playback.
Troubleshooting
If u t g is , y h r off.yo suspec somethin wrong immediatel switc powe
Do t use e unit in a mal n, r ple ut sound,no th bnor conditio fo exam witho
or th oke or foul sme , n cause fire or c k.wi sm ll ca ele rict shoc
Im at to ca yo ur semedi ely s p using it and ll the store erewh u p cha d it.
Neve tr repai th uni yoursel becaus dangerour y to r e t by f e it is s to do
so.
T n you s key to C or .ur car' AC ON
C ck the n n.he co nectio
R ce e.epla fus
C ck me or mute on/off, st volume to a de ed le .he volu adju sir vel
Th installatio angl mor tha 30° Adjus th installatioe n e is e n . t e n
an e ss than 3 .gl le 0°
Gene lra
1) Ca s e ne swi h is not on.r' ngi tc
2) e is t ctly connec d.Cabl no corre te
3) se is b t.Fu urn
4) V e is in m e or mum.olum ut mini
5) d sk s.Soun ip
Th built-i microe n - compute no operatin properl du noiser is t g y e to .
Pre RESE tt grss the T bu on to tore the prores am to ze .ro
Statio signa to weak Selec othe station strongen or l is o . t r s of r
signal l l.eve
Inser th antenn cabl firml int th antenn socke thi cat e a e y o e a t of s r
ra .dio
Ba or tl nn Co ne attt y c le is not cer ab rec y co ec .ted n ct the b tery
cable to the terminal that is always live.
a) B n is t . TUS connectio no good ak oue it t and insert a in.ga
b) B is d or no c e .US damage musi fil inside
ge to another B, or cord c side it. Chan US re musi in
6) rat keys not wo . The ope ion do rk
Radio
1) ch se in oa as .Mu noi br dc ts
2) The antenna cable is not connected.
3) et s on is .Pres tati reset
USB
USB is necting t no s ndcon bu ou
Specifications
General
Power supply Requirement : DC 12V
Maximum power output : 50W X 4CH
Speaker impedance : 4 - 8 Ohm
Unit Dimensions(WxHxD) : 7.0 X 2.0 X 3.8 inch
Weight : 1.54 Lb (0.7 kg)
Fuse : 15 A
FM
Frequency Range: 87.5 MHz - 107.9 MHz (USA)
87.5 MHz - 108.0MHz (EUROPE)
Channel step: 200 KHz(USA)
50 KHz(EUROPE)
AM
Frequency Range: 530 KHz - 1710 KHz (USA)
522-1620 KHz(EUROPE)
Channel step: 10 KHz(USA)
9 KHz(EUROPE)
USB
RADIO
Usable Audio Formats: MP3/WMA
Pre-amp Output: Front and Rear
Frequency Response: 20 Hz - 20KHz
S/N Ratio: 60dB
USB Port Type: 2.0
USB Charging: 5V/1A
BT
BT Profile supports: Headset, Handsfree and A2DP & AVRCP
Range of frequency: 2.4GHz spectrum
(power) / SRC (source) button
SEL (select/menu) button and VOL (volume) knob
BND(BAND) / AMS(automatic store station, automatic music search)
and (answer call) button
(pause/play), Preset station 1 button
RPT (repeat), Preset station 3 button
-10(previous 10 tracks), previous folder, Preset station 5 button
1.
2.
3.
4.
INT (intro), Preset station 2 button5.
6.
RDM (random), Preset station 4 button7.
8.
9. +10(next 10 tracks), next folder, Preset station 6 button
10. CLK (clock setting), MUTE button, (end call) button
11. (tune/seek down, previous track, fast reverse) button
12. (tune/ seek up, next track, fast forward) button
13. Hands-free Microphone 14. LCD Display 15. USB Port
16. AUX IN (auxiliary input) jack 17. Reset button

Produkt Specifikationer

Mærke: Boss
Kategori: Ikke kategoriseret
Model: 455BRGB

Har du brug for hjælp?

Hvis du har brug for hjælp til Boss 455BRGB stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Boss Manualer

Boss

Boss BC-1X Manual

16 December 2024
Boss

Boss Super Chorus CH-1 Manual

16 December 2024
Boss

Boss Bass Equalizer GEB-7 Manual

16 December 2024
Boss

Boss Turbo Distortion DS-2 Manual

16 December 2024
Boss

Boss Multi Overtone MO-2 Manual

16 December 2024
Boss

Boss Tera Echo TE-2 Manual

16 December 2024
Boss

Boss Metal Core ML-2 Manual

16 December 2024
Boss

Boss Delay DM-2W Manual

16 December 2024
Boss

Boss NS-1X Manual

17 November 2024
Boss

Boss GT-1B Manual

17 November 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Atlona

Atlona AT-DVIF30S-IR Manual

29 December 2024
Atlona

Atlona AT-PRO3HD66M Manual

29 December 2024
Atlona

Atlona AT-3GSDI500 Manual

29 December 2024
BlueBuilt

BlueBuilt BBMAG2M Manual

29 December 2024
Atlona

Atlona AT-3GSDI-14 Manual

28 December 2024
Atlona

Atlona AT-COMP10SS Manual

28 December 2024
Atlona

Atlona AT-2VGA300SL Manual

28 December 2024
Atlona

Atlona AT-HD-V216 Manual

28 December 2024
Atlona

Atlona AT-VGA11S Manual

28 December 2024
True

True TC900 Manual

28 December 2024