Bowflex SelectTech BD1090 Manual

Bowflex Fitnessudstyr SelectTech BD1090

Læs nedenfor 📖 manual på dansk for Bowflex SelectTech BD1090 (8 sider) i kategorien Fitnessudstyr. Denne guide var nyttig for 40 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/8

SelectTech® BD1090 International Dumbbell Unpacking Instructions 8000771.051517.C

®®

The following procedure will make it easier to remove

your SelectTech® dumbbell from its packaging.

The dumbbell is heavy. Ask for assistance if necessary.

• Open the top ﬂaps of the shipping box and remove the

upper section of foam.

Remove the plastic wrapper.

• Remove the reusable Restraint Strap. See 1.

•

Set selection numbers on the adjustment knobs to 41 on

both ends of dumbbell (

see 2

), and remove the dumbbell

(see 3). If necessary, set the knobs to a lower weight and

remove the dumbbell and weight plates separately.

•

Remove the base from the package, and place on ﬂoor or

dumbbell stand

. See 4.

•

Place dumbbell in the base

When moving the dumbbell assembly, use the handles that are

molded into each end of the base.

Note: If the dumbbell assembly is to be used for retail display,

secure the dumbbell with the reusable strap after

assembly.

In a retail display setting, the restraint strap allows enough

movement for demonstration, but prevents damage to the unit

and helps to avoid dropping and/or misuse by consumers.

3mm

1 2

If you have questions, please contact your local distributor. To ﬁnd your local distributor, go to: www.bowﬂexinternational.com

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all Warnings on this machine.

Restraint strap