Boyo VTB201MA Manual

Boyo dashcam VTB201MA

Læs nedenfor 📖 manual på dansk for Boyo VTB201MA (1 sider) i kategorien dashcam. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
V T B 2 0 1 M A Q U I C K I N S T A L L A T I O N G U I D E
Quick Installation Guide
1. System Overview
One VTB201MA high resolution HD CMOS color camera
with the following features:
yWeatherproof and water reistant
yMirror/ Non-Mirror image selectable switch
yWide-angle lens 170°
yBuilt-in Microphone
y360-degree adjustable mounting angle
yAuto-iris lens that automatically adjusts to light conditions
yInfrared light for improved image quality in low-light
situations
yNightvision distance of approx 8M
20M Extension Cable Included
Supplied installation accessories
2. Installation
Install the VTB201MA as follows:
a. Install the VTB201MA camera in the desired location, as
follows:
1) Fasten the camera mounting bracket, using the 4 self-
tapping Philips screws, to the desired mounting
surface, as shown in the Step 1 arrows of Figure 1.
2) Position the camera in the camera mounting bracket.
Adjust the camera to the proper angle, and then attach
the camera and sun visor to the camera mounting
bracket using the 4 supplied hex-head machine screws
(with washers), as shown in the Step 2 and Step 3
arrows of Figure 1.
Figure 1. Installing the Camera
b. Route the extension cable from the camera location to the
location of the output device (not supplied), such as a
monitor or switcher.
c. Insert the male connector of the extension cable into the
appropriate female audio/video port of the output device
(not supplied), such as a monitor or switcher.
3. Normal/Mirror Selector
The camera default setting is in reverse viewing. To change to
non-mirror viewing, unplug the jumper plug with the green wires
and re-power the camera for the changes to take effect.
4. Grid Line Selector
The camera default setting is grid line on. To turn off the grid
lines, unplug the jumper plug with the blue wires and re-power
the camera for the changes to take effect.
5. Specifications
Item Specification
Image Sensor 1/3 1089
TV System NTSC
Effective Pixels 720 x 480
Minimum Illumination 0.0 Lux
Power Consumption 12 VDC, 250mA Max
Operating Temperature -20°C to 70°C
Dimensions
(Width x Height x Depth)
3 inches x 3 inches x 2.25 inches
Lens Angle 170°
Supplied Accessories Manual
Screws
20M Extension cable
DC Power cable
2 Jumper terminals
Warranty card
Registration card
CAUTION: To reduce the risk of electrical shock, disconnect the
battery from the electrical system of the vehicle before
starting the installation.
CAUTION: Before inserting screws into the mounting surface,
ensure that the underside of the mounting surface is
clear of equipment that might be damaged by the
screws.


Produkt Specifikationer

Mærke: Boyo
Kategori: dashcam
Model: VTB201MA

Har du brug for hjælp?

Hvis du har brug for hjælp til Boyo VTB201MA stil et spørgsmål nedenfor, og andre brugere vil svare dig




dashcam Boyo Manualer

Boyo

Boyo VTR1188M Manual

28 August 2024
Boyo

Boyo VT-BP3 Manual

21 August 2024
Boyo

Boyo VTL375LTJ Manual

20 August 2024
Boyo

Boyo VTB201MA Manual

20 August 2024
Boyo

Boyo VTL402TJS Manual

20 August 2024
Boyo

Boyo VTB301HD Manual

20 August 2024
Boyo

Boyo VTL275LTJ Manual

20 August 2024
Boyo

Boyo VTC500DIY Manual

20 August 2024
Boyo

Boyo VTL405TJ Manual

20 August 2024
Boyo

Boyo VTL17ir Manual

20 August 2024

dashcam Manualer

Nyeste dashcam Manualer

Rexing

Rexing MTC1 Manual

17 December 2024
Rexing

Rexing M2-4CH Manual

17 December 2024
Rexing

Rexing M4-4 Manual

17 December 2024
Rexing

Rexing RH2-3 Manual

17 December 2024
Rexing

Rexing V1P Gen 3 Manual

17 December 2024
Rexing

Rexing V3 Manual

17 December 2024
Rexing

Rexing RoadMate CPDuo Manual

17 December 2024