Brabantia BBEL1009 Manual


Læs nedenfor 📖 manual på dansk for Brabantia BBEL1009 (2 sider) i kategorien Strygejern. Denne guide var nyttig for 31 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
www.brabantia.com | follow us on /brabantialife
INSTRUCTION MANUAL
2600W STEAM IRON
2600W Steam Iron
Model No : BBEL1009
automatically stop steaming when the temperature is too low in order to
prevent water from dripping out of the soleplate.
2. With the anti-drip system, you can iron even the most delicate of fabrics.
AUTO SHUT-OFF
An electronic safety device will automatically switch the heating element OFF
if the Steam Iron has not been moved for more than 30 seconds in a horizontal
position. If in a vertical position, this will happen after 8 minutes. To indicate that
the heating element has been switched OFF, the indicator light (13) will start
blinking.
1. When the Steam Iron is picked up again the indicator light will stop
blinking. The indicator light will illuminate to indicate that the Steam Iron
is heating up again.
2. Wait for the indicator to turn OFF. The Steam Iron will be ready for use
once again.
CLEANING AND MAINTENANCE
The self cleaning (12) feature cleans the inside of the ceramic soleplate (14);
thereby removing impurities.
We recommend using it every 10-15 days.
1. Set the steam control dial (3) to the OFF position (no steam).
2. Fill the transparent water tank (11) to the MAX lling level.
3. Set the temperature control dial (10) to the MAX heat temperature.
4. Plug the Steam Iron into the mains electrical supply.
5. Place the Steam Iron upright on a level, sturdy surface.
6. Wait for the indicator light (9) to turn red.
7. Unplug the Steam Iron from the mains electrical supply.
8. Hold the Steam Iron in a horizontal position over a sink.
9. Press the self cleaning button (12) down until the boiling water, steam and
impurities come out of the holes in the soleplate.
10. When the ceramic soleplate has cooled down, wipe it with a damp cloth.
STORAGE
1. After using, lift the Steam Iron with the lling hole pointing downwards to
empty the remaining water from the water tank.
2. Insert the plug into the electrical socket, and set the temperature control
dial to MAX for 1-2 minutes to evaporate the remaining water. Thereafter
unplug the Steam Iron from the mains electrical supply and allow it to cool
down completely before storing.
WARRANTY EXCLUSIONS
The warranty will not be valid if:
1. The product has not been installed, operated or maintained in accordance with the
manufacturer’s operating instructions provided with the product.
2. The product has been used for any purpose other than its intended function.
3. The damage or malfunction of the product is caused by any of the following:
Incorrect voltage
Accidents (including liquid or moisture damage)
Misuse or abuse of the product
Faulty or improper installation
Mains supply problems, including power spikes or lightning damage
Infestation by insects
Tampering or modication of the product by persons other than authorised
service personnel
Exposure to abnormally corrosive materials
Insertion of foreign objects into the unit
Used with accessories not pre-approved by Brabantia
Please refer to and heed all warnings and precautions in the Instruction Manual.
Due to continuous product development, specications may be subject to change without
prior notication.


Produkt Specifikationer

Mærke: Brabantia
Kategori: Strygejern
Model: BBEL1009

Har du brug for hjælp?

Hvis du har brug for hjælp til Brabantia BBEL1009 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Strygejern Brabantia Manualer

Strygejern Manualer

Nyeste Strygejern Manualer