Brita Fill & Go Manual

Brita Drikkeflaske Fill & Go

Læs nedenfor 📖 manual på dansk for Brita Fill & Go (2 sider) i kategorien Drikkeflaske. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

ENENEN EN

www.register.brit a.net

A B C

D E F

Enter Code: FGV1512

fill & go

1 min.

1 2

Getting Started

Introducción | Como começar

Podstawowe informacje

3 | English

Mouthpiece

Boquilla

Bocal

Ustnik

Disc Cover

Tapa del MicroDisc

Cobertura do MicroDisc

Pokrywa MicroDisc

Lid

Tapa

Tampa

Pokrywka

MicroDisc

Filtr MicroDisc

Base

Podstawa

Bottle

Botella

Garrafa

Butelka

4 | English 5 | English

1) Cleaning the bottle

Before using the ll&go for the rst time, clean the bottle without

the MicroDisc with a mild detergent or in the dishwasher. Clean the

ll&go regularly by hand or in the dishwasher A. Before cleaning

remove the MicroDisc 3 and store it on a clean surface during

the cleaning process. To ensure an optimum level of hygiene, we

recommend placing the MicroDisc in a clean cup every week and

pouring boiling water over it. In order to prepare the MicroDisc

properly, ensure it is fully submerged. If the MicroDisc oats to the

surface, use a spoon to hold the MicroDisc to the bottom of the cup.

After ve minutes, you can reinstall the MicroDisc into the water

lter. Please make sure that your hands are clean when touching the

MicroDisc and bottle.

2) Preparing the MicroDisc

Take the MicroDisc out of the packaging. Before using the MicroDisc

for the rst time, soak the MicroDisc in warm water for 1 minute to

remove any carbon dust that may be present and to

optimise water ow B.

3) Inserting the MicroDisc

Open the bottle lid 5. Unscrew disc cover 2

anti-clockwise C

and insert the disc D. Then screw the disc cover back on and close

the bottle lid.

4) Filling the bottle

Unscrew bottle base 4 and ll the bottle with tap water E. Then

screw the base back on to the bottle.

Open the lid, open the mouth piece and your ll&go

is now ready to use!

5) Changing the MicroDisc

One MicroDisc can lter up to 150 litres of water. To ensure optimal

ltration and hygiene, BRITA recommends the MicroDisc to be

replaced every 4 weeks. To do this, repeat step 2 and 3.

In some regions, the ltration of tap water containing particles can

result in a signicantly lower ow rate. In such cases, we

recommend changing the MicroDisc more frequently.

I. For quality

from the very start I. For quality

from the very start

6 | English

Use only with cold water (4 °C to 40 °C). The ll&go may only be

used with municipally treated cold tap water provided by your local

water authority. This water is constantly controlled and according

to legal regulations safe to drink. If an instruction is received from

the authorities that mains water must be boiled, then BRITA ltered

water must also be boiled. When the instruction to boil water is no

longer in force, the entire bottle must be thoroughly cleaned and a

new MicroDisc inserted. For certain groups of people (e.g. those

with impaired immunity and babies), it is generally recommended

that tap water should be boiled; this also applies to ltered water.

BRITA ltered water is a foodstuff intended for human consumption;

you should therefore use the water in your ll&go within one day.

When not using your ll&go for a longer period of time, the

bottle should be disassembled and stored completely dry.

II. Important

Notes

Always store spare MicroDiscs in a cool, dry place and

ensure that they are tightly sealed.

Like each natural product, the consistency of the MicroDisc is

subject to natural variances. This can lead to a light abrasion of

small carbon particles in the packaging and in the ltered water.

These particles have no negative health eﬀects and are not

harmful if ingested. In case you observe carbon particles, BRITA

recommends rinsing the MicroDisc thoroughly on both sides.

Dispose of used MicroDiscs with your general waste.

Dispose of the bottle according to local provisions.

Exclusion of liability

Please understand that BRITA cannot accept any liability on their

products if given usage instructions are not followed.

For more information, please visit www.brita.net

II. Important

Notes

fill & go

BRITA Water Filter Systems Ltd., BRITA House,

9 Granville Way, Bicester, Oxfordshire, OX26 4JT, UK

ll&go Vital pink: 1016790

ll&go Vital blue: 1017617

ll&go Vital lime: 1017609

ll&go Vital purple: 1017601

Model number

Source of supply for MicroDiscs: www.brita.net

BRITA Iberia S.L.U., Carrer de Valencia, 307, 2º 4ª,

08009-Barcelona

BRITA Polska Sp.z o.o., Ołtarzew, ul. Domaniewska 6,

05-850 Ożarów Mazowiecki, Polska

BRITA Water Filter Systems Distributors Pty Ltd.,

Level 9, 123 Epping Road, North Ryde,

NSW 2113, Australia

Do not use with water that is microbiologically

unsafe or of unknown quality without adequate

disinfection before or after the systems.

System Tested and Certied

by the WQA against NSF/ANSI

Standard 42 for the reduction

of chlorine, taste and odor

and particulate reduction.

For specic details please

read the Performance Data

Sheet enclosed in the box.

910

1020080-02-ELA 12/18

Produkt Specifikationer

Mærke:	Brita
Kategori:	Drikkeflaske
Model:	Fill & Go

Har du brug for hjælp?

Hvis du har brug for hjælp til Brita Fill & Go stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Drikkeflaske Brita Manualer

Brita Fill & Go Manual

26 Juli 2024

Drikkeflaske Manualer

Nyeste Drikkeflaske Manualer

Ikea AURTIENDE 605.748.92 Manual

6 November 2024

Arendo 307217 Manual

22 Oktober 2024

Nûby 0048526012503 Manual

1 Oktober 2024

Philips AVENT SCF802 Manual

9 September 2024

Ikea HETLEVRAD 104.973.25 Manual

6 September 2024

Philips GoZero AWP2771 Manual

6 September 2024

Philips AVENT SCF555 Manual

1 September 2024

Philips AVENT SCF755 Manual

1 September 2024

Philips AVENT SCF249 Manual

1 September 2024

Philips AVENT SCF790 Manual

1 September 2024