Britax KIDFIX II XP SICT Manual

Britax Autostol KIDFIX II XP SICT

Læs nedenfor 📖 manual på dansk for Britax KIDFIX II XP SICT (2 sider) i kategorien Autostol. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
08
01 02
03
04
10
12
14
13
07
05
06
11
Belt guide (bright red)
Release knob
XP-SICT (only KIDFIX II XP SICT)
Belt holder (dark red)
ISOFIX insertion aids
ISOFIX fastening points (automobile)
ISOFIT locking arms
01
02
03
04
05
06
07
Backrest
SecureGuard
ISOFIT adjustment button
Safety button
Storage compartment
08
09
10
XP-PAD
11
Adjusting handle of the headrest
12
13
14
Removing the seat cover
1. Moving the headrest of the vehicle seat into the top
position.
2. Unhook the cover hook 19 on the rear of the backrest.
3. Remove the top part of the cover and fold it forwards to
the seat surface.
4. Unhook the cover hook 19 on the front of the backrest.
5. Pull the cover o of the seat surface.
Removing the headrest cover
6.
Unhook the cover loop
20
on the rear of the backrest.
7. Unhook the cover hook 19 on the front of the backrest.
8.
Pull o the cover of the headrest
22
.
The cover can now be washed.
Please observe the
instructions on the washing label of the cover:
Re-fitting the cover
Proceed in reverse order to put on the cover.
5. CARE AND MAINTENANCE
19
20
19
19
22
09
Seat cushion
15
15
2. INTRODUCTION
Thank you for choosing
KIDFIX II XP / KIDFIX II XP SICT
to keep your child
safe through a new stage of their life.
In order to protect your child correctly, the
KIDFIX II XP / KIDFIX II XP
SICT
must always be used and installed as described in these instructions.
If you have any further questions regarding its use, please feel free to contact us:
These instructions use the following symbols stated below:
Symbol Keyword Explanation
DANGER! Risk of severe personal injury
WARNING! Risk of minor personal injury
CAUTION! Risk of material damage
TIP: Useful notes
Instructions that follow a set sequence are numbered.
Example:
1. Press the button...
17
16
Belt guide colours
For better dierentiation, the two vehicle seat
belts are highlighted in dierent colours. The
diagonal seat belt 17 in dark red and the lap belt
16 in bright red. The colour of the belt guides
on the child safety seat follows the same colour
scheme.
4. USE IN THE VEHICLE
Please observe the instructions for using children's restraining systems in the operating instruc-
tions of your vehicle. ISOFIX anchoring systems (see type The seat can be used in vehicles with
list) and in vehicles with a
3-point belt.
Please find the information on the seats approved for child safety seats of the weight classes 15 to
36 kg in the operating instructions of your vehicle
.
The is approved for two dierent methods of installation:KIDFIX II XP / KIDFIX II XP SICT
Symbol Installation type Approval type Section
with the ISOFIT locking arms on the
ISOFIX fastening points in the vehicle.
Observe the vehicle type list.
semi-
universal
a)
9A
with the vehicle's 3-point seatbelt universal 9B
a) This means that the child safety seat may only be used in vehicles that are listed in the
vehicle type list enclosed. This type list is consistently kept up to date. The latest version can
be obtained from us or from www.britax.com
You can use your child safety seat as follows:
In the direction of travel Yes
Against the direction of travel No
1)
with 2-point belt No
with 3-point belt2) Yes
with ISOFIX fastening points
(between seat surface and
backrest)
Yes
on front passenger seat Yes
3)
on outer rear seat Yes
on centre rear seat (with
3-point belt) Yes 4)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only if the vehicle
seat is also approved for use by adults. The seat may not be in the area of eect of an airbag.
2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on
belt with an "E" or "e" in a circle).
3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions
in vehicle owner's manual.
4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
15-36 kg
3. CERTIFCATION
BRITAX RÖMER
Vehicle child safety
seat
Testing and certification
In accordance with ECE* R 44/04
Group Body weight
KIDFIX II XP
KIDFIX II XP SICT
II+III 15 to 36 kg
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and certified according to the
requirements of the European Standard for Child Safety Equipment (ECE R
44/04). The seal of approval E (in a circle) and the approval number are located
on the orange approval label (sticker on the child safety seat).
This approval will be invalidated if you make any modifications to DANGER!
the child safety seat. Only the manufacturer is permitted to make
modifications to the child safety seat. The child seat is approved
for use both with and without XP-PAD.
WARNING! Use the
KIDFIX II XP / KIDFIX II XP SICT
exclusively for
securing your child in your vehicle. It is in no way suitable as a
seat or toy in the home.
Never secure your child or the child safety seat with a 2-point DANGER!
belt. If you secure your child in the child seat with only a 2-point
belt, then in the event of an accident this may cause serious
injuries to your child, possibly resulting in death.
PAGE I
6. DISASSEMBLY AND DISPOSAL
Please ensure that you only use the original BRITAX RÖMER replacement seat
covers, as the seat cover is an integral part of the child safety seat and fulfils
important functions to ensure the smooth operation of the system. Replacement
seat covers are available from your dealer.
• The cover can be removed and washed with a mild detergent in the delicates
programme of the washing machine (30 °C). Please observe the instructions on
the washing label of the cover.
• The plastic parts and the XP-PAD can be cleaned with a soap sud. Do not use
any caustic cleaning agents (such as solvents).
DANGER! The child seat must not be used without the seat cover.
1. PRODUCT OVERVIEW
1. Operate the release key of your vehicle seat buckle
2. Open the XP-PAD 11 on the Velcro fastener and
remove the diagonal belt 17 .
3. Open the dark red belt holder 03 by pressing
backwards the key on the belt holder 03 and
unthreading the diagonal belt 17 .
Only for installation type A (ISOFIT):
4. To release the ISOFIT fastening, release the green
safety button 08 and the red release button 07 first
on the one and the on the other side opposite on
another.
The child safety seat can now be removed.
The child safety seat must always be DANGER!
secured when it is in the vehicle, even if
no child is being transported.
03
DISPOSAL:
Please observe the waste disposal regulations in your country.
Disposal of packaging Container for cardboard boxes
Seat cover Residual waste, thermal utilisation
Plastic parts According to the labelling in the
corresponding container
Metal parts Container for metals
Belt straps Container for polyester
buckle and tongue Residual waste
17 11
0807
REMOVAL:
UNFASTENING YOUR CHILD:
1. To unfasten your child, use the release button of your vehicle seat buckle.
TIP! The XP-PAD can remained applied for easier use on the diagonal belt
of your vehicle, the diagonal belt must be retensioned before every journey;
see: [page II].Section10 step 12
KIDFIX II XP
KIDFIX II XP SICT
User instructions
www.britax.com
2000022092 - 05/16
GB
15 kg - 36 kg
(~4 Y - 12 Y)
Britax Childcare
Britax Römer
Kindersicherheit GmbH
Blaubeurer Strasse 71
D-89077 Ulm
Germany
T.: +49 (0) 731 9345-199/-299
F.: +49 (0) 731 9345-210
E.: service.de@britax.com
www.britax.com
Britax Childcare
Britax Exelsior Limited
1 Churchill Way West
Andover
Hampshire SP10 3UW
T.: +44 (0) 1264 333343
F.: +44 (0) 1264 334146
E.:
service.uk@britax.com
www.britax.com


Produkt Specifikationer

Mærke: Britax
Kategori: Autostol
Model: KIDFIX II XP SICT

Har du brug for hjælp?

Hvis du har brug for hjælp til Britax KIDFIX II XP SICT stil et spørgsmål nedenfor, og andre brugere vil svare dig




Autostol Britax Manualer

Autostol Manualer

Nyeste Autostol Manualer