Brother DR-2300 Manual
Brother
Printer tromle
DR-2300
Læs nedenfor 📖 manual på dansk for Brother DR-2300 (2 sider) i kategorien Printer tromle. Denne guide var nyttig for 17 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/2
Toner that doesn’t cost the earth
Print on recycled paper, using refilled cartridges
© Zinetic.co.uk. All Rights Reserved
INSTRUCTIONS FOR RESETTING BROTHER DR2200 DRUM
Before you begin
Don’t touch the drum cylinder or expose it to sunlight. The drum is
very sensitive to light and also touch and is very easy to damage.
The Brother printer counts drum rotations and shuts the drum unit down when it reaches its page yield of
12,000 pages at 5% coverage.
If your drum was working correctly prior to the "DRUM STOP" message appearing, you can reset the drum
unit on your printer and continue printing. We do this by telling the printer we have installed a new drum unit.
1. With the printer switched ON - Remove drum unit and toner cartridge from the printer.
(they are joined together)
2. Replace drum unit and toner cartridge back into the printer.
3. We now need to reset and trick the printer into thinking you have a new drum installed.
4. Open the front cover of the printer
HL PRINTERS
DCP / MFC PRINTER
5. Now we need to tell the printer that a ne drum was installed and reset the drum counter
HL PRINTERS
Press and hold down button for about 4 seconds Go
until all the LEDs light up.
Once all 4 LEDs are lit, release the button Go
DCP / MFC PRINTERS
Press Clear. To confirm you are installing a new drum
unit, press 1
When the LCD shows Accepted, close the front cover
Your drum unit has been reset !
Produkt Specifikationer
| Mærke: | Brother |
| Kategori: | Printer tromle |
| Model: | DR-2300 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Brother DR-2300 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Printer tromle Brother Manualer
23 Juli 2024
8 Marts 2024
18 Oktober 2023
Printer tromle Manualer
Nyeste Printer tromle Manualer
31 Juli 2024
11 Januar 2023