Caliber RCD120 Manual

Caliber Bilradio RCD120

Læs nedenfor 📖 manual på dansk for Caliber RCD120 (12 sider) i kategorien Bilradio. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/12

Key System Tuner CD/MP3/WMA

Short press long press Short press long press Short press long press

1Power Power off

2Rotary Volume

3Menu (audio / system) OK

4Panel release

5Disc slot

6Eject

7LCD display

8USB port

9Mode Mode Mode

10 Display

11 Mute

12 AMS

13 Band

14 Seek down Manual down Track down fast backward

15 Seek up Manual up Track up fast forward

16 Scan

17 3,5mm AUX In Jack

18 M1 Store M1 Play/Pause

19 M2 Store M2 Intro

20 M3 Store M3 Repeat

21 M4 Store M4 Shufe

22 M5 Store M5 Folder down

23 M6 Store M6 Folder up

710

178 18 19 20 21 22 2311

Description of the functions

Panel Release Push this button to release the frontpanel.

Eject (behind panel) Push this button to eject the CD out of the unit.

Power Power function to activate or deactivate the unit.

Band Band selection allows you to select different reception bands, f.i. FM1, FM2 and FM3

AF AF stands for Alternative frequencies; the tuner will return to alternative frequencies whenever the reception signal is getting worse.

TA TA stands for Trafc announcement which means that it will give you information about the trafc (if broadcasted) no matter what mode you are in (CD,USB, etc.) it will automatically interrupt the cd

and give the information, after that it automatically switches back to the selected mode

Manual up/down Hold rotary button to switch to manual radio frequency search (up/down step by step)

Menu (system) Press the VOL/SEL button for several seconds to activate the cyclical mode to choose from the following user instructions: DSP ON/OFF > ESP 12/45

(CD mode) > BEEP ON/OFF > AREA > VOL LAST/ADJ > SEEK. (rotate to adjust)

In DSP mode you can choose from preset EQ settings: FLAT, CLASSIC, POP, ROCK

Audio Menu The Audio menu button gives you the possibility to adjust your sound system with the following options Bass, Treble, Balance and Fader. These options can be used to ne tune your sound.

Mode The mode button allows you to go from one source (f.i. CD) to another source (f.i. Tuner) by pushing the button as many times as needed.

AMS AMS stands for Automatic store; in tuner mode it will automatically store the 6 strongest stations (M1-M6). Note: all previous stored stations are lost.