Caliber RMD231 Manual

Caliber Bilradio RMD231

Læs nedenfor 📖 manual på dansk for Caliber RMD231 (12 sider) i kategorien Bilradio. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/12

Key System Tuner MP3/WMA

Short press long press Short press long press Short press long press

1Power Power off

2Rotary Volume

3Menu (audio / system) OK

4Panel release

5LCD display

6USB port

7Mode Mode Mode

8Display

9Mute

10 AMS

11 Band

12 Seek down Manual down Track down fast backward

13 Seek up Manual up Track up fast forward

14 Scan

15 3,5mm AUX In Jack

16 M1 Store M1 Play/Pause

17 M2 Store M2 Intro

18 M3 Store M3 Repeat

19 M4 Store M4 Shufe

20 M5 Store M5 Folder down

21 M6 Store M6 Folder up

22 PTY

23 TA

24 AF

Description of the functions

Panel Release Push this button to release the frontpanel.

Power Power function to activate or deactivate the unit.

Band Band selection allows you to select different reception bands, f.i. FM1, FM2 and FM3

AF AF stands for Alternative frequencies; the tuner will return to alternative frequencies whenever the reception signal is getting worse.

TA TA stands for Trafc announcement which means that it will give you information about the trafc (if broadcasted) no matter what mode you are in (SD,USB, etc.) it will automatically interrupt the sd/

USB and give the information, after that it automatically switches back to the selected mode

Manual up/down Long press to move the radio frequency number up/down step by step.

Menu (system) Press the VOL/SEL button for several seconds to activate the cyclical mode to choose from the following user instructions: DSP ON/OFF > ESP 12/45

(CD mode) > BEEP ON/OFF > AREA > VOL LAST/ADJ > SEEK. (Press to enter fuctions)

In DSP mode you can choose from preset EQ settings: FLAT, CLASSIC, POP, ROCK

Audio Menu The Audio menu button gives you the possibility to adjust your sound system with the following options Bass, Treble, Balance and Fader. These options can be used to ne tune your sound.

Mode The mode button allows you to go from one source to another source (f.i. Tuner) by pushing the button as many times as needed.

AMS AMS stands for Automatic store; in tuner mode it will automatically store the 6 strongest stations (M1-M6). Note: all previous stored stations are lost.