Cameo EKS XLR Manual
Cameo
Laser pointer
EKS XLR
Læs nedenfor 📖 manual på dansk for Cameo EKS XLR (2 sider) i kategorien Laser pointer. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/2
Adam Hall GmbH · Adam-Hall-Str. 1 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain
that wall mounts are properly installed and secured. Make certain that the equipment is installed securely
and cannot fall down.
7. During installation, observe the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make
certain that the equipment is always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment
- in this case, observe the special instructions noted below. Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled
with liquids, such as vases or drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to
tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage
and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or
if it has been damaged in another way, switch it off immediately and unplug it from the mains outlet (if it is
a powered device). This equipment may only be repaired by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS T O THE POWER MAINS:
22. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do
not switch it on immediately. Moisture and condensation could damage the equipment. Do not switch on
the equipment until it has reached room temperature.
23. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency
match the values specified on the equipment. If the equipment has a voltage selection switch, connect
the equipment to the power outlet only if the equipment values and the mains power values match. If the
included power cord or power adapter does not fit in your wall outlet, contact your electrician.
24. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at
the mains outlet and/or power adapter and the equipment connector.
25. When connecting the equipment, make certain that the power cord or power adapter is always freely
accessible. Always disconnect the equipment from the power supply if the equipment is not in use or if
you want to clean the equipment. Always unplug the power cord and power adapter from the power outlet
at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter with
wet hands.
26. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this
can shorten the useful life of the equipment.
27. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter
from the power outlet.
28. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or
before extended periods of disuse.
CAUTION:
To reduce the risk of electric shock, do not remove cover (or
back). There are no user serviceable parts inside. Mainte-
nance and repairs should be exclusively carried out by qual-
ified service personnel.
The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the
unit, which may cause an electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance
instructions.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: https://cdn-shop.adamhall.com/media/
pdf/Manufacturers-Declarations-CAMEO_DE_EN_ES_FR.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1, 61267 Neu Ans-
pach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
FEATURES
Emergency cut-off for laser
Large red push button switch with rotary release
With key lock to prevent unauthorised operation
3-pin XLR connector
INTRODUCTION AND OPERATION
The CLLEKSXLR emergency cut-off switch facilitates installation of an emergency cut-off system so as to enable con-
nected effect lasers to be remotely switched off in the event of a hazardous situation. Cameo effect lasers (laser class 3b
and 4) can only be operated in a closed interlocking circuit. By pressing the emergency cut-off switch, a contact is opened
and the circuit is thus interrupted. The Cameo LEKS XLR has an impact-resistant, clearly visible yellow plastic housing,
a red emergency cut-off push button with rotary release, a locking switch and a female 3-pin XLR connector for use of
a commonly available XLR microphone or 3-pin DMX cable. Put the locking switch into the OFF position to interrupt the
interlock circuit switch off the connected lasers: move into the ON position to activate. Two keys are included. In order to
ensure an effect laser is not operated by unauthorised persons, lock the switch and remove the key! Lasers can only be
activated when the lock switch is in the ON position and the emergency cut-off push button is unlocked (to unlock, turn in
the direction of the arrow). The LEKS XLR meets European safety regulations for class 3b and 4 lasers and is compatible
with Cameo effect lasers fitted with 3-pin interlock connectors.
SPECIFICATIONS
CLLEKSXLR
Emergency Stop Switch with Key Control and XLR-Connector
Article number CLLEKSXLR
Product type: Emergency cut-off switch unit for effect laser
Laser shutdown: Emergency cut-off push button, locking switch
Connection type: Female 3-pin XLR connector
Material: Plastic
Colour: Black/yellow, red emergency cut-off push button
Dimensions (W x H x D): 72 x 65 x 110 mm
Weight: 0.5 kg
Additional features: 2 keys for locking switch included
Produkt Specifikationer
| Mærke: | Cameo |
| Kategori: | Laser pointer |
| Model: | EKS XLR |
Har du brug for hjælp?
Hvis du har brug for hjælp til Cameo EKS XLR stil et spørgsmål nedenfor, og andre brugere vil svare dig
Laser pointer Cameo Manualer
16 August 2024
13 August 2024
11 August 2024
11 August 2024
10 August 2024
10 August 2024
8 August 2024
6 August 2024
Laser pointer Manualer
- Laser pointer Bosch
- Laser pointer SilverCrest
- Laser pointer Metabo
- Laser pointer DeWalt
- Laser pointer RYOBI
- Laser pointer Skil
- Laser pointer ADA
- Laser pointer Makita
- Laser pointer Bushnell
- Laser pointer Nikon
- Laser pointer Da-Lite
- Laser pointer Hama
- Laser pointer Milwaukee
- Laser pointer Laserliner
- Laser pointer Parkside
- Laser pointer Black And Decker
- Laser pointer Einhell
- Laser pointer Leica
- Laser pointer Stanley
- Laser pointer Hilti
- Laser pointer United Office
- Laser pointer Melinera
- Laser pointer Powerplus
- Laser pointer BeamZ
- Laser pointer Stairville
- Laser pointer Velleman
- Laser pointer Carson
- Laser pointer Stabila
- Laser pointer Vortex
- Laser pointer Connect IT
- Laser pointer GPO
- Laser pointer Eurolite
- Laser pointer Uni-T
- Laser pointer Toolcraft
- Laser pointer Steren
- Laser pointer Kaiser
- Laser pointer Cocraft
- Laser pointer Klip Xtreme
- Laser pointer Tacklife
- Laser pointer Kensington
- Laser pointer Laserworld
- Laser pointer Kreator
- Laser pointer Perfect Choice
- Laser pointer Prexiso
- Laser pointer Picotronic
- Laser pointer Meopta
Nyeste Laser pointer Manualer
16 November 2024
3 Oktober 2024
23 September 2024
21 September 2024
14 September 2024
13 September 2024
13 September 2024
11 September 2024
8 September 2024
4 September 2024