Casio 4732 Manual

Casio Ur 4732

Læs nedenfor 📖 manual på dansk for Casio 4732 (5 sider) i kategorien Ur. Denne guide var nyttig for 26 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/5

Operation Guide 4732 4733

MO0605-EA

Warning!

• The measurement functions built into this watch are not intended for use in taking

measurements that require professional or industrial precision. Values produced

by this watch should be considered as reasonably accurate representations only.

• When fishing, always take proper precautions to ensure your own personal safety

and the personal safety of others around you.

• The fishing level indicator and moon phase indicator produced by this watch are

all based on calculations that use the watch’s current time, date, and Home Site

settings. Because of this, you should make sure that the current date and time,

and your Home Site data are all correct before using the indicators.

• See the “Timekeeping” section of this manual for information about setting the

current time and date, and about specifying your Home Site.

• Note that the fishing level indicator and moon phase indicator are all based on

calculated values. They are provided only for reference purposes.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any

claims by third parties that may arise through the use of this watch.

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your

purchase, be sure to read this manual carefully. About This Manual

• Depending on the model of your watch, display text

appears either as dark figures on a light background

(Module 4732), or light figures on a dark background

(Module 4733). All sample displays in this manual are

shown using dark figures on a light background.

• Button operations are indicated using the letters shown

in the illustration.

• For the sake of simplicity, the sample displays in this

manual do not show the analog hands of the watch.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Module 4732

Module 4733

(Light)

General Guide

• Press C to change from mode to mode.

• In any mode (except when a setting screen is on the display), press to illuminateB

the display.

Temperature Data

Recall Mode

Stopwatch Mode

World Time Mode

Fishing Mode

▲

Countdown Timer

Mode

▲

Alarm Mode

Press .C

▲

Hand Setting Mode

Timekeeping Mode

▲

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

This watch features separate digital and analog timekeeping. The procedures for

setting the digital time and analog time are different.

• In the Timekeeping Mode, press A to toggle between the thermometer screen and

the temperature tendency screen.

•

The fishing level indicator indicates the times when fish can be expected to be feeding.

For more information, see

“

Fishing Mode

”.

Temperature Tendency

Screen

Temperature

tendency

graph

Day of

week –

Day

indicator

Hour : Minutes

Moon phase

indicator

Fishing level

indicator

Press .A

▲

Thermometer Screen

Temperature

Seconds

• The Moon phase indicator shows the current Moon phase in accordance with the

current date as kept in the Timekeeping Mode.

• See Thermometer“ ” for details about the thermometer screen and temperature

tendency graph.

Important!

• Be sure to configure the current time and date, and your Home Site data (data for

the site where you use the watch) correctly before using the functions of this watch.

See “Home Site Data” for more information.

Setting the Digital Time and Date

This watch is preset with UTC differential values that represent each time zone around

the globe. Before setting the digital time, be sure to first set the UTC differential for

your Home Site, which is the location where you normally will be using the watch.

• Note that World Time Mode times are all displayed based on the time and date

settings you configure in the Timekeeping Mode.

To set the digital time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

• Be sure to configure the correct UTC differential for

your Home Site before configuring any other

Timekeeping Mode settings.

• See the “ ”UTC Differential/City Code List for

information about the UTC differential settings that are

supported.

2. Press C to move the flashing in the sequence shown

below to select the setting you want.

Seconds

Hour

UTC

Differential Minutes

Year

DST

Day Month

Seconds

Temperature

Unit

12/24-Hour

Format

Temperature Sensor

Calibration

3. When the setting you want to change is flashing, use and D B to change it as

described below.

Screen: To do this:

Reset the seconds to 00

Toggle between Daylight Saving

Time (ON) and Standard Time (OF)

Specify the UTC differential

Change the hour or minutes

Toggle between 12-hour (12H) and

24-hour ( ) timekeeping2 H4

Do this:

Press D.

Use ).D (+) and B (–

Press D.

Use ).D (+) and B (–

Change the year, month, or day

• The UTC differential setting range is 12.0 to +14.0 in 0.5-hour units for Standard–

Time (DST turned off), and 11.0 to +15.0 in 0.5-hour units for summer time (DST–

turned on).

• For information about settings other than the time and date, see the following.

Temperature Sensor Calibration: “Thermometer”

Temperature Unit: “To specify the temperature display unit”

4. Press A twice to exit the setting screen.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all modes.

• The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

• See “Daylight Saving Time (DST) Setting” below for details about the DST setting.

• Any time the seconds setting is changed, the analog hands are adjusted accordingly.

Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode digital time between DST and Standard Time

1.In the Timekeeping Mode, hold down until theA

seconds start to flash, which indicates the setting

screen.

2. Press C once and the DST setting screen appears.

3. Press to toggle between Daylight Saving Time (DON

displayed) and Standard Time ( displayed).OF

4. Press twice to exit the setting screen.A

•

The DST indicator appears on the Timekeeping, Fishing,

Alarm, and Hand Setting Mode screens to indicate that

Daylight Saving Time is turned on. In the case of the

Fishing Mode, the indicator appears on the fishingDST

level screen only.

DST indicator

On/Off status

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	4732

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio 4732 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio Baby-G BGA-320 Manual

28 Oktober 2024

Casio Baby-G BGA-200-1E2ER Manual

6 Oktober 2024

Casio Edifice EFA-112D-1AVEF Manual

6 Oktober 2024

Casio BA-110DC-2A1 Manual

3 Oktober 2024

Casio MTP-1302D-7A1VEF Manual

30 September 2024

Casio Baby-G BG-5600WH-7ER Manual

29 September 2024

Casio Edifice EF-316D-1AVEF Manual

25 September 2024

Casio MTD-1064D-1AVEF Manual

22 September 2024

Casio DW-5600E-1VER Manual

20 September 2024

Casio G-Shock GMA-B800 Manual

20 September 2024

Ur Manualer

Nyeste Ur Manualer

Diesel Rasp Nsbb DZ1872 Manual

15 December 2024

Fossil Collider Hybrid HR FTW7009 Manual

15 December 2024

Fossil Neutra Hybrid HR FTW7027 Manual

15 December 2024

Fossil Neutra Hybrid HR FTW7025 Manual

15 December 2024

Fossil Monroe Hybrid HR FTW7035 Manual

15 December 2024

Fossil Collider Hybrid HR FTW7008 Manual

15 December 2024

Fossil Monroe Hybrid HR FTW7039 Manual

15 December 2024

Ice Watch Ola Kids Manual

15 December 2024

TFA 60.4512.01 Manual

14 December 2024

Oregon Scientific PrysmaChrome BAR292A Manual

14 December 2024