Miyota 0S1A Manual

Miyota Ur 0S1A

Læs nedenfor 📖 manual på dansk for Miyota 0S1A (9 sider) i kategorien Ur. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/9
INSTRUCTION MANUAL FOR MIYOTA WATCH MOVEMENT
CALIBER NO. 0S10/0S1A
CHRONOGRAPH FUNCTION: CENTER SECOND HAND CHRONOGRAPH 1/1 sec. Timing
up to 11 hours 59 minutes 59 seconds
BATTERY: SR927W
A) DISPLAYS AND BUTTONS
B) SETTING THE TIME
C) SETTING THE DATE
D) USING THE CHRONOGRAPH
E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
B) SETTING THE TIME
1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position, small second hand begins to run.
C) SETTING THE DATE
1. Pull the crown out to the 1st position.
2. Turn the crown counter-clockwise to set the date.
*If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the
following day.
3. After the date has been set, push the crown back to the normal position.
D) USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/1 second united up to maxinum of 11 hours 59
minutes 59 seconds.
The chronograph second hand keeps continuously for 11 hours 59 minutes 59 seconds after starting.
Measuring time with the chronograph
1. The chronograph can be started and stopped each time button "A" is pressed.
2. Pressing button "B" resets the chronograph and the chronograph second hand, chronograph minute
hand, and chronograph hour hand return to zero position.
" A "
RESET " A " TIME MEASUREMENT STOP
" B" " A " " B "
E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
This procedure shoud be performed when the chronograph second hand does not return to zero position
after the chronograph has been reset, and including after the battery has been replaced.
1. Pull the crown out to the 2nd position.
2. Press button "A" to set the chronograph second hand to the zero position. The chronograph hand can
be advanced rapidly by continuously pressing button "A".
3. Once the hand have been zeroed, return the crown to the normal position.
* Do not push crown to normal position while the chronograph second hand returns to zero position.It
stops on the way when crown are returned to normal position and its position is recognized as zero
position.
MIYOTA
UNIVERSAL MASTERPIECE BORN IN JAPAN
MADE IN JAPAN
METAL MOVEMENT
1st position
2nd position
Minute hand
Button A
Chronograph
second hand
Chronograph
minute hand
Button B
Hour hand
Chronograph
hour hand Calendar
Normal crown position
Small Second hand
A) DISPLAYS AND BUTTONS

Produkt Specifikationer

Mærke: Miyota
Kategori: Ur
Model: 0S1A

Har du brug for hjælp?

Hvis du har brug for hjælp til Miyota 0S1A stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ur Miyota Manualer

Miyota

Miyota 0S10 Manual

1 Marts 2025
Miyota

Miyota 0S1A Manual

1 Marts 2025

Ur Manualer

Nyeste Ur Manualer

Crane

Crane GPS Watch Manual

26 Februar 2025
Adidas

Adidas ADH9002 Manual

15 Januar 2025
Ascot

Ascot AB6-FW-155B Manual

15 Januar 2025
Adidas

Adidas ADH3031 - Originals Denver Manual

15 Januar 2025
Adidas

Adidas ADH4045 Manual

15 Januar 2025
Hugo Boss

Hugo Boss Chronograph 1513503 Manual

15 Januar 2025
Ice Watch

Ice Watch Loulou Manual

15 Januar 2025
Rolex

Rolex GMT-Master II Manual

14 Januar 2025
Ice Watch

Ice Watch Clear Sunset Manual

13 Januar 2025
La Crosse Technology

La Crosse Technology WT-8112U Manual

12 Januar 2025