Casio EFE-500D-1AVEF Manual

Casio Ur EFE-500D-1AVEF

Læs nedenfor 📖 manual på dansk for Casio EFE-500D-1AVEF (3 sider) i kategorien Ur. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/3

Operation Guide 5069

MO0906-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your

purchase, be sure to read this manual carefully.

What to do if the bottom dial hand is stopped

The watch is shipped from the factory with the bottom dial

hand stopped in order to conserve battery power. Even

though the bottom dial hand is stopped, the watch

continues to maintain the current time internally. If the

bottom dial hand is stopped when you purchase the

watch, press any one of the watch’s buttons to start hand

movement.

Bottom dial hand

About This Manual

•Button operations are indicated using the letters shown

in the illustration.

•Each section of this manual provides you with the

information you need in order to perform operations in

each mode. Further details and technical information

can be found in the “Reference” section.

•The bottom dial is a disk that rotates to indicate various

types of information, depending on the mode.

- During regular timekeeping, the thick line of the disk

indicates the current second. In other modes, the thick

line on the disk will indicate the day of the week, the

alarm ON/OFF setting, and the DST ON/OFF setting.

- When setting the date, the disk rotates so the arrow

mark at the top of the dial points to the value that

represents the ones digit of the current year setting.

During a stopwatch operation, the dial rotates at one

revolution per second. The 1/20-second count is the

value indicated by the arrow mark at the top of the dial.

General Guide

Alarm Mode

Press C.

▲

Press C.

▲

Press .A

Hold down A

for about three seconds.

▲

World Time Mode

Timekeeping Mode

▲

Stopwatch Mode

Press .B or D

▲

Press D.

(When the stopwatch

is reset.)

Time/Date Adjustment

Press .C

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date, and to switch between Standard Time and

Daylight Saving Time (summer time).

•Daylight Saving Time (summer time) advances the time

setting by one hour from Standard Time. Remember that

not all countries or even local areas use Daylight Saving

Time.

•Pressing A in the Timekeeping Mode will cause the

bottom dial hand to move to the current day of the week.

Also, the indicator hand will move to the city code that is

currently selected as your Home City.

Press A to return to regular timekeeping. The watch

also will return to regular timekeeping if you do not

perform any operation for about three seconds.

Hour hand

Indicator hand

Minute hand

Left dial

hand

Bottom dial

hand

Day

Day of week

City code

Press .A

▲

To set the time and date

1. In the Timekeeping Mode, hold down A for about three

seconds until the watch beeps.

•The indicator hand will move to the city code that is

currently selected as the Home City. This is the city

code setting mode.

•The bottom dial hand also will indicate the current

DST on/off setting at this time.

2. Press D to move the indicator hand clockwise, until it

points at the city code you want to select as your Home

City.

•For full information on city codes, see the “City Code

Table”.

3. Press B to toggle the DST setting indicated by the

bottom dial hand on or off.

•Even after you change the DST setting, you still can

use D to select a different Home City code if you

want.

Indicator hand

Bottom dial hand

4. After the Home City and DST settings are the way you

want, press C.

•This will cause the watch to beep and the indicator

hand to move to the 12 o’clock position. This is the

time setting mode.

•All hands (except for the indicator hand and the

bottom dial hand) and the day display will change

automatically to the current time and date settings for

the selected city code.

•All button operations are disabled while the hands and

day display are changing.

5. Use D B (+) and (–) to change the time (hour and

minute) setting.

•As you set the time, take care to ensure that the

left dial hand also indicates the correct 24-hour

timekeeping hour.

6. After the time setting is the way you want, press C.

•This will cause the watch to beep and change to the

year setting mode.

Hour hand

Indicator hand

Minute hand

Left dial hand

7. Use D B and to change the year setting.

•You can set the year within the range of 2001 to 2099.

•Use B to move the indicator hand clockwise to the

value of the tens digit that you want to specify. To set

2012, for example, move the hand to 10.

•Use D to rotate the bottom dial so the ones digit you

want to specify is at the top (under the mark). To

set 2012, for example, rotate the dial until 2 is at the

top as shown in the illustration.

8. After the year setting is the way you want, press C.

•This will cause the watch to beep and change to the

month setting mode.

00 10

3090

Indicator

hand

Bottom dial

hand

Setting the year (10s digit)

Setting the year (1s digit)

9. Use D to move the indicator hand clockwise to the

month you want to specify. To set June, for example,

move the hand to 6 (Jun).

10.After the month setting is the way you want, press C.

•This will cause the watch to beep and change to the

day setting mode.

11.Use D (+) and B (–) to change the day setting.

•When setting the day, the watch automatically will

skip days ( and ) that are not included in the30 31

currently selected month. If you can’t select 30 or 31

when you want to, check to make sure that the

proper month is selected.

•You can return to the time setting mode after

configuring the day setting by pressing C.

Pressing C will cause the watch to beep twice.

Dec Jan

Feb

MarSep

Oct

Nov

Apr

May

Jun

Jul

Aug

Setting the Month

Day

Indicator hand

Month

12.After all of the settings are the way you want and the day display is no longer

changing, press A. This will cause the bottom dial hand to start moving again and

the other hands to start moving from their current positions.

•You can press at any time during the above procedure to return to regularA

timekeeping.

•The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change

it except after you have the watch’s battery replaced.

Stopwatch

The stopwatch lets you measure elapsed time.

•When you enter the Stopwatch Mode, the bottom dial

hand moves to 12 o’clock and the right dial hands move

to 12 o’clock.

•You can start elapsed time measurement with the

stopwatch while the watch is in the Stopwatch Mode or

the Timekeeping Mode.

•The display range of the stopwatch is 23 hours,

59 minutes, 59.95 seconds.

•The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

•You can switch to another mode from the Stopwatch

Mode only while the stopwatch is stopped and reset.

Indicator hand

Stopwatch

1/20 seconds

Stopwatch

minutes

Stopwatch hours

(24-hour format)

To start an elapsed time operation while in the Stopwatch Mode

1. In the Timekeeping Mode, press D to enter the Stopwatch Mode.

2. In the Stopwatch Mode, press B to start elapsed time measurement.

3. Press B to stop elapsed time measurement.

•You can restart and stop elapsed time measurement as many times as you like by

pressing .B

•The bottom dial hand indicates 1/20 seconds during the first 60 seconds only, and

then stops. When elapsed time measurement is stopped (by pressing B), the

bottom dial hand will jump to the 1/20 second indication (which is kept internally).

4. Check the elapsed time.

•After you are finished measuring elapsed time, press D to reset the stopwatch. The

stopwatch will stop and reset even if you press D while elapsed time measurement

is in progress.

•To return to regular timekeeping, press while the stopwatch is reset.D

Hour hand Minute hand

Day

Bottom dial hand

Indicator hand

Left dial

hand

Right dial hands

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	EFE-500D-1AVEF
Vægt:	236 g
Dimensioner (BxDxH):	47.5 x 14.6 x 55.8 mm
Armbånd, materiale:	Rustfrit stål
Urkassens materiale:	Rustfrit stål
Ur-indstilling:	12t/24t
Stopur:	Ja
Batterilevetid:	2 År
Batteritype:	SR927W
Antal understøttede batterier:	1
Urets glastype:	Safir
Alarmfunktion:	Ja
Vandbestandig dybde:	100 m
Nøjagtighed:	±20 sek/md
Verdenstid funktkon:	Ja