Casio IT-300 Manual
Læs nedenfor 📖 manual på dansk for Casio IT-300 (52 sider) i kategorien Boks. Denne guide var nyttig for 29 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/52
Handheld Terminal
User’s Guide
Series
Be sure to read “Safety
Precautions” inside this
guide before trying to use
your Handheld Terminal.
E
Information in this document is subject to change without advance notice. CASIO Computer Co.,
Ltd. makes no representations or warranties with respect to the contents or use of this manual
and specifi cally disclaims any express or implied warranties of merchantability or fi tness for any
particular purpose.
BLUETOOTH is a registered trademark owned by Bluetooth SIG, Inc. and licensed to
CASIO COMPUTER CO., LTD.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
•
•
E-1
Contents
Safety Precautions .........................................................................................E-3
Operating Precautions ...................................................................................E-8
Important ......................................................................................................E-10
Regulatory Information ................................................................................E-11
Checking in the Box .....................................................................................E-13
Handheld Terminal System Confi guration .................................................E-14
General Guide ...............................................................................................E-16
IT-300 .................................................................................................................E-16
USB and Charging Unit .....................................................................................E-19
Loading and Removing the Battery Pack ...................................................E-20
Loading ..............................................................................................................E-21
Removing ........................................................................................................... E-22
Handling the USB and Charging Unit (HA-J65US).....................................E-23
Mounting the USB and Charging Unit ..............................................................E-23
Removing the USB and Charging Unit .............................................................. E-24
Using the optional cable (HA-J81USBH) ..........................................................E-24
Connecting to a Computer .................................................................................E-25
Charging the Battery Pack ..........................................................................E-26
AC Adaptor (optional) .......................................................................................E-26
Dual Battery Charger (optional).........................................................................E-27
Attaching the Neck Strap.............................................................................E-28
To attach the neck strap ...................................................................................... E-28
Using the Touch Panel .................................................................................E-29
Setting the Display Brightness ....................................................................E-30
Adjusting Display Brightness ............................................................................ E-30
Display Auto Dimmer ........................................................................................E-30
Using the Laser Scanner..............................................................................E-31
Bar Code Scanning Position ..............................................................................E-32
Adjusting the Laser Light Emission Width .................................................E-33
Handling microSD Cards .............................................................................E-35
Installing.............................................................................................................E-35
Removing ........................................................................................................... E-36
E-2
Performing Bluetooth® Communication .....................................................E-37
Resetting the Handheld Terminal ................................................................E-38
Performing a Full Reset (Initialization) ............................................................E-38
Warning Label ...............................................................................................E-40
Using the Dual Battery Charger (HA-D32DCHG) .......................................E-41
General Guide ....................................................................................................E-41
Charging a Battery Pack.....................................................................................E-43
Connecting Multiple Dual Battery Chargers......................................................E-44
Specifi cations .....................................................................................................E-45
Using Rechargeable Battery Pack ..............................................................E-46
Battery Pack Specifi cations ................................................................................E-46
Specifi cations ..............................................................................................E-47
IT-300 .................................................................................................................E-47
USB and Charging Unit .....................................................................................E-49
E-3
Safety Precautions
Congratulations upon your selection of this CASIO product. Be sure to read the
following Safety Precautions before trying to use it for the fi rst time.
Your neglect or avoidance of the warning and caution statements in the
subsequent pages causes the danger of fi re, electric shock, malfunction and
damage on the goods as well as personal injury.
Markings and Symbols
The following are the meanings of the markings and symbols used in these Safety
Precautions.
Danger This symbol indicates information that, if ignored or applied
incorrectly, creates the danger of death or serious personal injury.
Warning
This symbol indicates information that, if ignored or applied
incorrectly, creates the possibility of death or serious personal
injury.
Caution
This symbol indicates information that, if ignored or applied
incorrectly, creates the possibility of personal injury or property
damage.
A diagonal line indicates something you should not do. The symbol shown
here indicates you should not try to take the unit apart.
A black circle indicates something you should do. The symbol shown here
indicates you should unplug the unit from the wall outlet.
Warning
Disassembly and Modifi cation
Never try to disassemble or modify the Handheld Terminal and its options
including battery pack and battery in any way.
Abnormal Conditions
Should the Handheld Terminal and/or its options including battery pack and
battery become hot or start to emit smoke or a strange odor, immediately turn
off the power and contact your dealer or distributor whom you purchased the
product from, or an authorized CASIO service provider.
•
•
•
•
E-4
Warning
Dust and Moisture
Though the Handheld Terminal is dust and water splash resistant, its options
including the battery pack are not. Keep loose metal objects and containers
fi lled with liquid away from your Handheld Terminal and the options. Also,
never handle the Handheld Terminal and the options while your hands are
wet.
Laser Light
The laser scanner models (model dependant) with the integrated laser
scanning module scan bar codes using laser light. Never look directly into
the laser light or shine the laser light into the eyes.
•
•
Warning
Interference with the Operation of Other Equipment
(Using Wireless Data Communication)
Keep your Handheld Terminal at least 22 centimeters (8
11/16") away from
anyone wearing a pacemaker. Radio waves emitted by the Handheld
Terminal can affect the operation of a pacemaker.
Before the use in aircraft, be sure to consult with cabin crew for interference
the Handheld Terminal emits.
Before the use in medical facility, be sure to consult with the facility
management or the manufacture of a specifi c medical equipment that the
Handheld Terminal may interfere with.
Do not use the Handheld Terminal nearby gas pump or chemical tank or any
other places fl ammable or explosive.
To comply with the relevant European RF exposure compliance
requirements, a separation distance of at least 3.8cm in wireless operation
must be maintained between the terminal and all persons around. This
terminal must not be co-located or operating in conjunction with other
transmitter.
•
•
•
•
•
E-5
Caution
Foreign Objects
Take care to ensure that metals or combustible objects are not inserted into
the openings of the Handheld Terminal or its options, and not to allow
moisture to get inside of them.
Location
Install the cradle properly on a fl at and stable surface so that it cannot fall
down onto fl oor.
LCD Screen
Never apply strong pressure to the screen or subject it to strong impact.
Doing so can crack the LCD Screen.
•
•
•
E-6
Optional Lithium-ion Battery Pack
Danger
Never use the Handheld Terminal and its option including the battery pack
and battery next to open fl ame, near a stove, or any other area exposed to
high heat, or leave them for a long period of time in a vehicle parked in
direct sunlight.
Never use the battery pack with any device other than the Handheld
Terminal.
Never dispose of the battery pack by incinerating it or otherwise expose it
to heat.
Never transport or store the battery pack together with metal objects that
may result in shorting positive (+) and negative (–) terminals of the battery
pack. Be sure to place the battery pack in its case whenever transporting or
storing it.
Never throw the battery pack or otherwise subject it to strong impact.
Never pierce the battery pack with nails, hit it with a hammer, or step on it.
Use only the specifi ed battery charger to charge the battery pack.
•
•
•
•
•
•
•
Warning
Never place the battery pack in a microwave oven or any other high-voltage
device.
If the amount of time period the battery pack can serve becomes
considerably short even after it has been fully charged for the specifi ed time
period, stop using it.
Should the battery pack start to leak or emit a strange odor, immediately
move it away from any fl ame nearby. Leaking battery fl uid is combustible.
Should fl uid from the battery pack accidentally get into your eyes or on the
skin, do not rub it. Immediately rinse it off with clean tap water and then
consult a physician.
•
•
•
•
Caution
Replace only with the same type of battery pack recommended by CASIO.
Dispose of used battery packs according to the local regulation.
Keep the battery pack out of the reach of small children.
•
•
E-8
Operating Precautions
Your Handheld Terminal and its options are precision. Improper operation or rough
handling can cause problems with data storage and other problems. Note and observe
the following precautions to ensure proper operation.
Do not leave dead battery pack in the Handheld Terminal for a long period.
Dead battery pack can leak, leading to malfunction and damage to the Handheld
Terminal.
Stop or avoid using the Handheld Terminal and its options in areas and
conditions subject to the following.
— Large amounts of static electricity
— Extreme heat or cold or humidity
— Sudden temperature change
— Large amount of dust
— After large amount of rain or water falls on the Handheld Terminal
— Pressing the screen or keys with excessive force when using in the rain
Use the touch panel by touching it lightly with your fi nger.
Do not press down hard on the touch panel or press it with pointed objects (ballpoint
pens, fi ngernails, etc.) as this could scratch or damage the touch panel and lead to
malfunctions.
The touch panel may not operate correctly in the following situations:
— When a foreign object is stuck to or touching the panel
— When a sticker or protective sheet other than the special sheet provided is stuck to
the touch panel
— When your fi nger or the touch panel is wet
— When you use it while wearing gloves
Dead Pixels
The LCD panel employed in this product uses high precision and substantial number
of components which commonly cause a small number of the pixels not to light or
to remain lit all the time. This is due to the characteristics of LCD panel yield in
accuracy over 99.99% and permissible.
•
•
•
•
•
E-9
Lithium-ion Battery Pack
Each lithium-ion battery pack has its life. The life span heavily depends on how the
battery pack is charged or stored which may cause deterioration of the battery pack
to shorten the life span if it is handled improperly. Note the tips below to make the
battery pack last long.
— Be sure to charge the battery pack before using it if the battery pack is used for the
fi rst time or if it has not been used for a long period of time.
— If the battery pack is repeatedly charged, the life span becomes short. To avoid the
repetition of charging the battery pack, be sure that the remaining capacity is low
before you start charging.
— Be sure to charge the battery pack in recommended temperature range. The
temperature range is dependant on device you use to charge including battery
chargers and handheld terminals. Refer to the respective user guides. Charging
the battery pack in a temperature outside of the recommended range causes
deterioration.
— When used at low temperatures, the battery pack has a reduced capacity and will
supply power for shorter time.
The life span of the battery pack is also shortened.
— Charging the battery pack while the battery pack itself is freeze including inside
causes deterioration. Be sure to resume an ordinary room temperature on the
battery pack and then leave it unattended for approximately one hour before
charging.
— After charging the battery pack, if the performance of the battery pack does not
show any recovery, it is a sign of ending the life. Replace it with a new battery
pack.
— Avoid the battery pack with a full of the capacity to store for a long period of
time. If you need to store it for a long period, be sure that the remaining capacity
is 30 to 50 percent and to store in a moderate low temperature. This can reduce
deterioration.
— The battery pack gradually deteriorates over time. In particular, storing (or using)
the fully charged battery pack at high temperatures tends to accelerate battery pack
deterioration.
•
E-10
Important
This guide does not include any information about programming and download
procedures. See the applicable separate documentation for information about the
procedures.
After Service
Should this product ever malfunction, contact your original retailer providing
information about the product name, the date you purchased it, and details about the
problem.
This mark applies to EU countries and Turkey only.
•
•
E-11
Regulatory Information
The USA and Canada
GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not
applicable to other areas).
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modifi cations not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Proper connectors must be used for connection to host computer and/or peripherals in order to meet FCC
emission limits.
Caution Exposure to radio frequency radiation (below is for portable device)
To comply with FCC RF exposure compliance requirements, this device must not be co-located or
operating in conjunction with any other antenna or transmitter.
•
•
•
•
Declaration of Conformity
Model Number: HA-J65US
Trade Name: CASIO
Responsible party: Industrial Handheld Division
Casio America, Inc.
Address: 570 Mt. Pleasant Avenue, Dover, New Jersey 07801, USA
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
For Users in Canada
These Class B digital apparatuses comply with Canadian ICES-003.
Cet appareil numériqué de la classes B est conformé à la norme NMB-003 du Canada.
These devices comply with RSS 210 of Industry Canada (IC).
Operation is subject to the following two conditions:
(1) These devices may not cause interference, and
(2) These devices must accept any interference, including interference that may cause undesired opera-
tion of this device.
E-12
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce
brouillage est susceptible de compromettre le fonctionnement du dispositif.
Exposure to radio frequency radiation
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does
not emit RF fi eld in excess of Health Canada limits for the general population;
consult Safety Code 6, obtainable from Health Canada's website at
http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/99ehd-dhm237/index_e.html
Europe
Products are for distribution within
all member states of the EU.
France limited to 2446.5-2483.5 MHz Indoor use.
Belgium limited to 2400-2483.5 MHz Indoor, 2460-2483.5 MHz Outdoor use.
0984
0984
0984
0984
0984
Optional models HA-J65US, HA-D32DCHG and HA-D20BAT-A are in conformity with the
Council Directive 2004/108/EC.
Manufacturer:
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Representative within the European Union:
CASIO EUROPE GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
E-13
Checking in the Box
Please check the contents of the box before using the Handheld Terminal for the fi rst
time.
Open the box and make sure that all the items shown here are included.
USB and Charging Unit
(HA-J65US)
Cable
(HA-J80USBM)
Battery Pack
(HA-D20BAT-A)
A USB Power Adaptor is provided with models to be sold in China.
User's Guide (this manual)
Handheld Terminal
Neck Strap
E-14
Handheld Terminal System Confi guration
Options
HA-D20BAT-A
Dual Battery Charger Battery Pack
HA-D32DCHG
AC Adaptor for
Dual Battery Charger
AD-S42120B-N
AC Adaptor for
USB and Charging Unit
AD-S15050B-N
Power Cord for Europe AC-CORD-EU
Power Cord for North America AC-CORD-US
Power Cord for Taiwan AC-CORD-TW
Power Cord for Korea AC-CORD-KR
Power Cord for Australia AC-CORD-AU
For the latest options list, refer to the ON-LINE manual available at
http://world.casio.com/system/pa/UsersGuide/sup85_e.html
IT-300 Series
E-15
Options
USB and Charging Unit
HA-J65US
Screen Protect Sheet
HA-J90PS5
Cables
HA-J80USBM HA-J81USBH
E-16
General Guide
IT-300
Left
13
14
1 2
3
6
4
5
8
7
9
1112
10
6
Front Right
17
16
16
Top
Bottom
19
15
16
17
23
24
22
20
21
Back
1 2 18
E-17
1 Indicator 1 Orange: Charging
Green: Charging complete
Red Flashing: Battery pack error or the surrounding temperature
is out of the charging temperature range
2 Indicator 2 Blue Flashing: BT in use
Orange Flashing: WLAN in use
Magenta Flashing: Ready to communicate (when USB-
connected)
Red: Barcode read error
Green: Successful read
Lights red for alarm functions.
3 Touch Panel Displays texts, operations, indicators and so forth. Also used to
operate the IT-300 and enter data by tapping the screen with a
fi ngertip.
4 Cursor Key Perform the same functions as the up, down, left and right arrow
keys on a PC keyboard.
5 Trigger Key Used to perform bar code reading.
Can be assigned an arbitrary function.
6 Function Keys Used when starting a pre-registered application.
7 Enter Key Press when fi nishing entering numerical values or when moving
to the next step.
8 Fn Key Used to make various settings in combination with the numeric
keys or when starting a pre-registered application.
9 CLR Key Press to clear all the information entered by pressing keys.
10 Microphone Used for audio input (including voice).
11 Mode Key The key switches the character input mode, either characters in
lowercase letter or characters in uppercase letter.
12 Numeric Keys Press to enter numbers and text.
13 Power Key Turns the power on and off.
14 MENU Key Displays menus for applications.
15 Headset Jack Used to connect an earphone-microphone headset.
16 Strap Holes Used to attach neck strap.
17 USB and Charging
Unit Mount Holes
Used to attach the USB and Charging Unit.
18
Barcode Reader
Laser light or LED light is emitted from this window that reads
bar codes.
19 Power Supply/Data
Communication
Terminals
Used to connect the USB and Charging Unit for USB
communication or power supply.
E-18
20 microSD Card Slot
Cover
Slot a microSD card into here.
21 Lock Switches Used to lock the covers and to release.
22 Battery Pack Cover Used to cover the battery compartment that holds the battery
pack inside.
23 Reset Switch Used to reset the Handheld Terminal.
24 microSD Card Slot microSD card slot.
E-19
USB and Charging Unit
21
3
Top Bottom
4
Left
4
Right
1 AC Adaptor Jack Connect the AC adaptor here.
2 USB Port Connect the cable (HA-J80USBM) here.
3
Power Supply/Data
Communication
Connector
Used to connect to the IT-300 for USB communication or
power supply.
4 Stoppers Press when removing the IT-300.
E-20
Loading and Removing the Battery Pack
Your Handheld Terminal uses two types of battery: a battery pack and a memory
backup battery.
The battery pack is used to power normal operations and to store data, while the
memory backup battery provides the power required to maintain memory contents
when the battery pack power is unable to supply power for some reason.
Use the battery pack (HA-D20BAT-A) as the main power source.
The backup battery is installed inside of the Handheld Terminal.
This guide uses the following terms to refer to the batteries.
Battery Pack:
Rechargeable battery pack (HA-D20BAT-A) for normal operations and
data storage
Backup Battery: Built-in battery for memory backup
When the battery pack power goes low, immediately charge it or replace it with a
charged battery pack.
You can use the AC adaptor or the Dual Battery Charger to charge a battery pack
installed in the terminal. See the relevant sections in this guide for the respective
options about how to use.
Important!
Always keep backup of all important data!
The battery pack powers normal operation and also provides power required to
maintain memory contents, while the backup battery provides backup power to
maintain memory contents. Because of this, you should not remove the battery
pack if the backup battery is dead. Removing the battery pack while the backup
battery is dead causes data in the memory to be corrupted or lost. Note that
once data is lost it cannot be recovered. Always keep backup of all important
data.
The charge of a battery pack when you purchase it may be depleted due to
testing at the factory or natural discharge during shipment and storage. Be sure
to charge the battery pack before you use it.
The life of a battery pack is limited, and charging a battery pack causes it to
gradually lose its ability to maintain the charge. If your battery pack seems to
require charging very frequently, it probably means it is time to purchase a new one.
If a battery pack is used past the end of its service life, it may swell up in size. In
such a case, replace the battery pack with a new one.
If the backup battery is fully charged, it will maintain the contents of the
terminal’s memory (RAM) for approximately 10 minutes when the main battery
pack is removed.
It takes 4 days with the main battery pack installed in the terminal for the
backup battery to be charged fully.
•
•
•
•
•
•
E-21
Loading
1. Turn the terminal over, turn the lock switch for the battery pack cover to the “FREE”
position ( ), and then remove the battery pack cover ( ).
2. Load a battery pack (HA-D20BAT-A). Take care that the battery pack is oriented
correctly when you load it. In addition, load the battery pack while making sure that
the end of the battery pack removal tape is protruding above the battery pack ( ).
3. Put back the battery pack cover in the compartment as instructed by the arrows, 4
and 5 in the illustration and then turn the lock switch to the “LOCK” position ( 6).
4
5
6
E-22
Removing
1. Make sure that the Handheld Terminal is turned off.
If the power is on, press the power key to turn it off.
2. Turn the terminal over, turn the lock switch for the battery pack cover to the “FREE”
position ( ), and then remove the battery pack cover ( ).
3. Remove the battery pack by pulling up the removal tape as shown in the illustration
( ).
Important!
When removing the battery pack, make sure you do not leave the Handheld
Terminal without a battery pack for more than about 10 minutes. Doing so can
cause data in the memory to be deleted.
When removing the battery pack, be sure you carefully follow the proper
procedure as explained in this guide.
Never try to use other type of battery than the ones that are specifi ed for this
product.
When removing the battery pack, pull the removal tape straight up and remove
the battery pack. Removing with excessive force can damage the battery pack.
Before starting to use the Handheld Terminal, ensure that the battery pack cover
is properly closed. If not, the power is not turned on or is turned off abruptly
while it is in use.
•
•
•
•
•
E-23
Handling the USB and Charging Unit (HA-J65US)
Mount the USB and Charging Unit on the terminal when using the unit to charge the
battery pack in the terminal or when connecting the terminal to another USB device
using the optional cable (HA-J81USBH).
Mounting the USB and Charging Unit
1.
Fit the USB and Charging Unit onto the bottom of the terminal as shown in the illustration.
2. After mounting the unit onto the terminal, check that it is fi rmly locked in place using
the stoppers.
Stoppers
Important!
The USB and Charging Unit can only be mounted on the terminal in one direction. Do not use
excessive force to attempt to push the terminal into the unit when it is facing the wrong way.
Water or other liquids on the power supply/data communication terminals on
the USB and Charging Unit or terminal can lead to an electric shock or fi re. Note
also that soiling on the terminals will impair the connection, leading to reduced
charging functionality. As a safety precaution, disconnect the AC adaptor and USB
cable before cleaning the power supply terminals with a dry cloth or cotton bud.
Never short-circuit the power supply/data communication terminals on the USB
and Charging Unit or terminal as this could cause a fault.
If the neck strap is attached to the terminal, take care not to trap it when mounting
the USB and Charging Unit. If you are having diffi culties mounting the USB and
Charging Unit, attach the neck strap using the strap hole on the top of the terminal.
•
•
•
•
E-24
Removing the USB and Charging Unit
1. Unlock the stoppers on the left and right sides of the USB and Charging Unit by
pressing them inwards, as shown in the illustration.
2. Keeping the stoppers pressed in, pull the USB and Charging Unit off the terminal.
Using the optional cable (HA-J81USBH)
Plug the cable into the USB and Charging Unit and use it to connect a USB device.
Cable (HA-J81USBH)
USB and Charging Unit
USB cable
USB device
E-25
Connecting to a Computer
You can use the USB and Charging Unit together with the cable (HA-J80USBM) to
connect the IT-300 to a computer and exchange data via USB. This combination can
also be used to charge the battery pack installed in the IT-300 using power supplied
from the computer.
Cable (HA-J80USBM)
USB and Charging Unit
PC
Status of Indicator 1 on IT-300:
Orange: Charging
Red Flashing: Standby due to battery pack error or the surrounding temperature is out
of the charging temperature range
(charging begins when the temperature is within the charging temperature
range)
Green: Charging complete
E-26
Charging the Battery Pack
The battery pack installed in the IT-300 can be charged using the optional AC adaptor
(AD-S15050B). An indicator on the IT-300 shows the level of charge.
You can also charge the battery pack using the optional Dual Battery Charger (HA-
D32DCHG).
Note that you can charge the battery pack while the terminal is connected to a computer
and transferring data. (Refer to “Connecting to a Computer” on page 25.)
AC Adaptor (optional)
Use the USB and Charging Unit provided.
AC Adaptor (AD-S15050B)
USB and Charging Unit
Status of Indicator 1 on IT-300:
Orange: Charging
Red Flashing: Standby due to battery pack error or the surrounding temperature is out
of the charging temperature range
(charging begins when the temperature is within the charging temperature
range)
Green: Charging complete
E-27
Dual Battery Charger (optional)
Use the optional AC Adaptor for Dual Battery Charger (AD-S42120B).
AC Adaptor (AD-S42120B)
You can connect up to three Dual Battery Chargers.
Status of Charge Indicator LED
Off: Not charging
Red: Charging
Red Flashing: Battery pack problem
Green: Charging complete
Green Flashing: Standby due to the surrounding temperature being beyond the
specifi ed temperature range (Approximately 0°- 40°C) (charging
resumes when the temperature reaches the range.)
E-28
Attaching the Neck Strap
The neck strap can be used to prevent the Handheld Terminal from fall. Since there
are three strap holes where the neck strap can be attached, use the hole that affords the
greatest ease of use. Attach the neck strap according to the procedure described below.
To attach the neck strap
1. Pass the thin cord of the neck strap through the strap hole on the back of the
Handheld Terminal.
2. Pass the other end of the strap (the part you put around your neck) through the loop
formed by the thin cord.
Important!
Do not swing the Handheld Terminal around holding the neck strap.
E-29
Using the Touch Panel
Use the touch panel by touching it lightly with your fi nger. Do not use objects other
than your fi nger.
You can use the touch panel in the following ways:
Tap: Lightly tap the screen with your fi nger.
Touch: Hold your fi nger against the screen.
Flick: Move your fi nger across the screen in a swiping motion.
Drag: Touch the screen and then move your fi nger without lifting it from the screen.
•
•
•
•
E-30
Setting the Display Brightness
Adjusting Display Brightness
You can use the following procedures to adjust display brightness to make it easier to
read under different lighting conditions.
Press the “Fn” key and then press the “5” key or “6” key after confi rming that “F” is
displayed on the screen. Pressing the “5” key adjusts brightness for a darker display,
while pressing the “6” key adjusts brightness for a lighter display.
∗ In order to continue to make adjustments, press the “5” key or “6” key again after
fi rst pressing the “Fn” key.
∗ You can set the brightness by tapping “Backlight” in the Control Panel.
Display Auto Dimmer
The display auto dimmer automatically lowers display brightness if you do not
perform any operation for a specifi c period of time. This helps the battery power to be
conserved.
Tap “Backlight” in the Control Panel to set the time delay until the display dims.
•
E-31
Using the Laser Scanner
1. After turning on the power, position the laser scanner close to a bar code and then
press the trigger key.
2. The laser emits light and scans the bar code. If scanning is completed normally,
Indicator 2 displays a green light.
Important!
If you are unable to scan a bar code, try changing the angle at which the scanner
is held or distance from the scanner to the bar code, and then try scanning
again.
This Handheld Terminal is capable of scanning bar codes at a distance of
about 40-400 mm (19/16"-153/4"). Furthermore, the distance at which
scanning is possible may vary according to the bar code symbology.
•
•
E-32
Bar Code Scanning Position
Position the laser scanner close to the bar code when scanning small bar codes.
Position the laser scanner at a distance from the bar code so that the bars enter the light
when scanning large bar codes.
Margin Margin
Good Good Good
Bad Bad Bad Bad
Warning!
■ Never look directly into the laser light.
The products with the integrated Laser Scanner module scan bar codes using
laser light. Never look directly into the laser light or shine the laser light
into the eyes.
•
Produkt Specifikationer
| Mærke: | Casio |
| Kategori: | Boks |
| Model: | IT-300 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Casio IT-300 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Boks Casio Manualer
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
Boks Manualer
- Boks Samsung
- Boks Miele
- Boks Sharp
- Boks HP
- Boks Toshiba
- Boks Olivetti
- Boks Zebra
- Boks Olympia
- Boks ELO
- Boks Intermec
- Boks IZettle
- Boks Newland
- Boks Vectron
- Boks Barska
- Boks Sam4S
- Boks Crestron
- Boks CUSTOM
- Boks Qian
- Boks Equip
- Boks VeriFone
- Boks Approx
- Boks Flytech
- Boks Posiflex
- Boks Cambro
- Boks AOpen
- Boks EC Line
- Boks Colormetrics
- Boks MyPOS
Nyeste Boks Manualer
19 Februar 2025
19 Februar 2025
19 Februar 2025
3 Januar 2025
28 December 2024
28 December 2024
28 December 2024
28 December 2024
27 December 2024
27 December 2024