Casio Radio Controlled WV-59E-1AVEF Manual

Casio Ur Radio Controlled WV-59E-1AVEF

Læs nedenfor 📖 manual på dansk for Casio Radio Controlled WV-59E-1AVEF (5 sider) i kategorien Ur. Denne guide var nyttig for 76 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/5
Operation Guide 3053
1
MO0609-EA
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
Caution!
Your watch is shipped with it Auto Display feature (which continually changes the
contents of the digital display) turned on. Calibration signal reception is disabled while
Auto Display is turned on.
Press any button to turn off Auto Display and return to the Timekeeping Mode.
About This Manual
Button operations are indicated using the letters shown
in the illustration.
Each section of this manual provides you with the
information you need in order to perform operations in
each mode. Fur ther details and technical information
can be found in the “Reference” section.
Countdown Timer Mode
Stopwatch ModeAlarm Mode
Timekeeping Mode
Press .C
World Time Mode
General Guide
Press C to change from mode to mode.
In any mode (except when a setting screen is on the display), press to illuminateB
the display.
Radio-controlled Atomic Timekeeping
This watch receives a time calibration signal and updates
its time setting accordingly.
Supported time calibration signals: Germany
(Mainflingen), England (Rugby), United States (Fort
Collins), Japan.
Current Time Setting
This watch adjusts its time setting automatically in
accordance with a time calibration signal. You can also
perform a manual procedure to set the time and date,
when necessary.
The first thing you should do after purchasing this watch
is to specify your Home City (the city where you
normally will use the watch). For more information, see
“To specify your Home City”.
PM
indicator
Month Day
Year
Day of week
Home Time
(Hour : Minutes Seconds)
When using the watch outside the areas covered by the time signal transmitters, you
will have to adjust the current time setting manually as required. See “ ”Timekeeping
for more information about manual time settings.
The U.S. time calibration signal can be picked up by the watch while in North
America. The term North America in this manual refers to the area that consists of
Canada, the continental United States, and Mexico.
To specify your Home City
1. In the Timekeeping Mode, hold down A until the city
code starts to flash, which indicates the setting screen.
2. Press (east) and (west) to select the city code youD B
want to use as your Home City.
Time calibration signal reception is supported when
any one of the city codes shown in the table below is
selected as your Home City.
l
l
l
l
l
l
l
l
l
l
l
City code
German/U.K. Signal Japan Signal U.S. Signal
City
Code
LIS
LON
MAD
PAR
ROM
BER
STO
City
Name
Lisbon
London
Madrid
Paris
Rome
Berlin
Stockholm
City
Code
ATH
MOW
City
Name
Athens
Moscow
City
Code
HNL
ANC
YVR
LAX
YEA
DEN
MEX
City
Name
Honolulu
Anchorage
Vancouver
Los Angeles
Edmonton
Denver
Mexico City
City
Code
YWG
CHI
MIA
YTO
NYC
YHZ
YYT
City
Name
Winnipeg
Chicago
Miami
Toronto
New York
Halifax
St. Johns
City
Code
HKG
BJS
TPE
SEL
TYO
City
Name
Hong Kong
Beijing
Taipei
Seoul
Tokyo
3. Press A to exit the setting screen.
Important!
Normally, your watch should show the correct time as soon as you select your Home
City code. If it does not, it should adjust automatically after the next auto receive
operation (in the middle of the night). You can also perform manual receive or you
can set the time manually.
The watch will receive the time calibration signal automatically from the applicable
transmitter (in the middle of the night) and update its settings accordingly. For
information about the relationship between city codes and transmitters, see Home
City Codes and Transmitters.
Under factory default settings, auto receive is turned off for all of the following city
codes: MOW HKG (Moscow), (Hong Kong), (Beijing), (Honolulu), andBJS HNL
ANC (Anchorage). For details about turning on auto receive for these city codes, see
To turn auto receive on and off.
You can disable time signal reception, if you want. See To turn auto receive on and
off for more information.
See the maps under “ ”Reception Ranges for information about the reception ranges
of the watch.
If you are in an area that does not use Daylight Saving Time (summer time), turn off
the DST setting.
Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration signal:
auto receive and manual receive.
Auto Receive
With auto receive, the watch receives the time calibration signal automatically up to
six times a day. When any auto receive is successful, the remaining auto receive
operations are not performed. For more information, see About Auto Receive .“ ”
Manual Receive
Manual receive lets you start a time calibration receive operation with the press of a
button. For more information, see To perform manual receive.
Important!
When getting ready to receive the time calibration signal, position the watch as
shown in the nearby illustration, with its 12 oclock side facing towards a window.
Make sure there are no metal objects nearby.
12 o clock
or
Make sure the watch is facing the right way.
Proper signal reception can be difficult or even impossible under the conditions listed
below.
Signal reception normally is better at night than during the day.
Time calibration signal reception takes from two to seven minutes, but in some
cases it can take as long as 14 minutes. Take care that you do not perform any
button operations or move the watch during this time.
Inside or
among
buildings
Inside a
vehicle
Near
household
appliances,
office
equipment,
or a mobile
phone
Near a
construction
site, airport,
or other
sources of
electrical
noise
Near high-
tension
power lines
Among or
behind
mountains
The time calibration signal the watch will attempt to pick up depends on its current
Home City code setting as shown below. If you use the watch in Japan or Europe
(each of which has two different transmitter locations), it will try to receive the time
calibration signal from one of the transmitters in your current location. If it cannot
receive the signal, it will then try to receive the time calibration signal from the other
transmitter.
Home City Code
LIS, LON,
MAD, PAR, ROM, BER,
STO, ATH, MOW*
HKG*, BJS*, TPE,
SEL, TYO
HNL*, ANC*, YVR,
LAX, YEA, DEN, MEX,
YWG, CHI, MIA, YTO,
NYC,YHZ, YYT
Frequency
60.0 kHz
77.5 kHz
40.0 kHz
60.0 kHz
60.0 kHz
Transmitter
Rugby (England)
Mainflingen (Germany)
Fukushima (Japan)
Fukuoka/Saga (Japan)
Fort Collins, Colorado
(the United States)
Home City Codes and Transmitters
* The areas covered by the MOW HKG BJS HNL, , , , and ANC city codes are quite
far from the time calibration signal transmitters, and so certain conditions may
cause problems with signal reception.


Produkt Specifikationer

Mærke: Casio
Kategori: Ur
Model: Radio Controlled WV-59E-1AVEF

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio Radio Controlled WV-59E-1AVEF stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ur Casio Manualer

Ur Manualer

Nyeste Ur Manualer