Casio WV58DA-1AV Manual

Casio Ur WV58DA-1AV

Læs nedenfor 📖 manual på dansk for Casio WV58DA-1AV (5 sider) i kategorien Ur. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/5

Operation Guide 3054

MO0606-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your

purchase, be sure to read this manual carefully.

Caution!

Your watch is shipped with it Auto Display feature (which continually changes the

contents of the digital display) turned on. Calibration signal reception is disabled while

Auto Display is turned on.

Press any button to turn off Auto Display and return to the Timekeeping Mode.

About This Manual

•Button operations are indicated using the letters shown

in the illustration.

•Each section of this manual provides you with the

information you need in order to perform operations in

each mode. Fur ther details and technical information

can be found in the “Reference” section.

▲

Countdown Timer Mode

Stopwatch ModeAlarm Mode

Timekeeping Mode

Press .C

▲

World Time Mode

▲

General Guide

•Press C to change from mode to mode.

•In any mode (except when a setting screen is on the display), press to illuminateB

the display.

Radio-controlled Atomic Timekeeping

This watch receives a time calibration signal and updates

its time setting accordingly.

•Supported time calibration signals: United States (Fort

Collins), England (Rugby).

Current Time Setting

This watch adjusts its time setting automatically in

accordance with a time calibration signal. You can also

perform a manual procedure to set the time and date,

when necessary.

•The first thing you should do after purchasing this watch

is to specify your Home City (the city where you

normally will use the watch). For more information, see

“To specify your Home City”.

indicator

Month – Day

Year

Day of week

Home Time

(Hour : Minutes Seconds)

•When using the watch outside the areas covered by the time signal transmitters, you

will have to adjust the current time setting manually as required. See “ ”Timekeeping

for more information about manual time settings.

•The U.S. time calibration signal can be picked up by the watch while in North

America. The term “North America in this manual refers to the area that consists of”

Canada, the continental United States, and Mexico.

To specify your Home City

1. In the Timekeeping Mode, hold down A until the city

code starts to flash, which indicates the setting screen.

2. Press (east) and (west) to select the city code youD B

want to use as your Home City.

•Time calibration signal reception is supported when

any one of the city codes shown in the table below is

selected as your Home City.

City code

U.S. Signal U.K. Signal

City

Code

LIS

LON

MAD

PAR

ROM

BER

STO

City

Name

Lisbon

London

Madrid

Paris

Rome

Berlin

Stockholm

City

Code

ATH

MOW

City

Name

Athens

Moscow

City

Code

HNL

ANC

YVR

LAX

YEA

DEN

MEX

City

Name

Honolulu

Anchorage

Vancouver

Los Angeles

Edmonton

Denver

Mexico City

City

Code

YWG

CHI

MIA

YTO

NYC

YHZ

YYT

City

Name

Winnipeg

Chicago

Miami

Toronto

New York

Halifax

St. Johns

3. Press A to exit the setting screen.

Important!

•Normally, your watch should show the correct time as soon as you select your Home

City code. If it does not, it should adjust automatically after the next auto receive

operation (in the middle of the night). You can also perform manual receive or you

can set the time manually.

•The watch will receive the time calibration signal automatically from the applicable

transmitter (in the middle of the night) and update its settings accordingly. For

information about the relationship between city codes and transmitters, see “Home

City Codes and Transmitters”.

•Under factory default settings, auto receive is turned off for all of the following city

codes: HNL ANC MOW (Honolulu), (Anchorage), ATH (Athens), and (Moscow). For

details about turning on auto receive for these city codes, see To turn auto receive“

on and off”.

•You can disable time signal reception, if you want. See To turn auto receive on and“

off” for more information.

•See the maps under “ ”Reception Ranges for information about the reception ranges

of the watch.

•If you are in an area that does not use Daylight Saving Time (summertime), turn off

the DST setting.

Time Calibration Signal Reception

There are two different methods you can use to receive the time calibration signal:

auto receive and manual receive.

•Auto Receive

With auto receive, the watch receives the time calibration signal automatically up to

six times a day. When any auto receive is successful, the remaining auto receive

operations are not performed. For more information, see About Auto Receive .“ ”

•Manual Receive

Manual receive lets you start a time calibration receive operation with the press of a

button. For more information, see “To perform manual receive”.

Important!

•When getting ready to receive the time calibration signal, position the watch as

shown in the nearby illustration, with its 12 o'clock side facing towards a window.

Make sure there are no metal objects nearby.

12 o clock’

•Make sure the watch is facing the right way.

•Proper signal reception can be difficult or even impossible under the conditions listed

below.

•Signal reception normally is better at night than during the day.

•Time calibration signal reception takes from two to seven minutes, but in some

cases it can take as long as 14 minutes. Take care that you do not perform any

button operations or move the watch during this time.

Inside or

among

buildings

Inside a

vehicle

Near

household

appliances,

office

equipment,

or a mobile

phone

Near a

construction

site, airport,

or other

sources of

electrical

noise

Near high-

tension

power lines

Among or

behind

mountains

•The time calibration signal the watch will attempt to pick up depends on its current

Home City code setting as shown below.

Home City Code

HNL*, ANC*, YVR,

LAX, YEA, DEN, MEX,

YWG, CHI, MIA, YTO,

NYC,YHZ, YYT

LIS, LON,

MAD, PAR, ROM, BER,

STO, ATH*, MOW*

Frequency

60.0 kHz

Transmitter

Fort Collins, Colorado

(the United States)

Rugby (England)

Home City Codes and Transmitters

* The areas covered by the , and HNL, , ANC ATH MOW city codes are quite far from

the time calibration signal transmitters, and so certain conditions may cause

problems with signal reception.

Reception Ranges

Rugby

500 kilometers

U.K. Signal

1,500 kilometers

Fort Collins

600 miles

(1,000 kilometers)

U.S. Signal

2,000 miles

(3,000 kilometers)

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	WV58DA-1AV
Bredde:	51.5 mm
Dybde:	11 mm
Højde:	42 mm
Vægt:	97 g
Armbånd, materiale:	Metal
Vandfast:	Ja
Urkassens materiale:	Metal
Kalender:	Ja
Ur-indstilling:	12t/24t
Stopur:	Ja
Timer:	Nedtælling
Urtype:	Armbåndsur
Batterilevetid:	2 År
LED-baggrundsbelysning:	Ja
Slagfast:	Ingen
Alarmfunktion:	Ja
Produktdesign:	Casual
Mekanismetype:	Elektronisk
Se opkaldstype:	LED-skive
Vandbestandig dybde:	50 m
Husets farve:	Sølv
Båndets hovedfarve:	Sølv
Etui form:	Rund
Køn:	Hanstik
Nøjagtighed:	+/-20 sek/md
Kalendertype:	Dag
Se markørstil:	Romansk nummervisning
Kronograf:	Ingen
Verdenstid funktkon:	Ja
Radiosignal modtager:	WWVB, MSF