Celly SHAPE1 Manual

Celly Headset SHAPE1

Læs nedenfor 📖 manual på dansk for Celly SHAPE1 (15 sider) i kategorien Headset. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/15

Read this user manual and in

particular the safety notes,

before using the product.

Keep the user manual for future

reference and include it when passing the

product on to third parties.

Esprinet S.p.A. will not in any way be held

responsible for injury or damage caused to

persons or property arising from misuse of

the product.

Warnings

Avoid listening at extreme volumes,

particularly for prolonged periods of time

when using the product.

If you use the product at an excessively high

volume, you could permanently damage your

hearing. Listen at a moderate volume.

Audio warnings, alerts and environmental

noises may sound diﬀerent when wearing the

product.

Be aware of how these signals diﬀer in terms

of their sound so that you are able to recognize

the signals in corresponding situations.

Do not use the product when driving motor

vehicles, cycling, when operating machines or

in other situations where impaired awareness

of noises in your surroundings could pose a

risk to you or others. At the same time, also

observe the legal regulations and provisions in

the country where you use the product.

To prevent malfunction or damage to the

product, avoid accidental falls, do not crush,

puncture or exercise a high level of pressure

on the product.

Keep the product away from humidity, water

or other liquids.

Do not store or expose your product to any

source of heat, direct sunlight, radiators,

stoves or other heat sources such as the

dashboard of your car in the summer.

Do not try to modify, repair or disassemble the

product.

Do not use a damaged product.

Do not under any circumstances use

aggressive cleaning agents, alcohol or other

chemical solutions for cleaning as they can

damage the housing or even impair the

functionality of the product.

Do not immerse the product in water or other

liquids.

ere are no serviceable parts inside the

product. Never open/disassemble it.

Keep the product out of reach of children.

Never allow children or persons with

disabilities to use electrical products without

supervision.

Make sure that children do not play with the

plastic wrapping.

ey may swallow it when playing and

suﬀocate.

Make sure children do not remove any small

parts from the product and play with them.

Charging

When using for the ﬁrst time, charge the

battery to maximum capacity. To recharge,

plug the charging cable into the product's

charging port. e ﬂashing red light at the top

of the charging box indicates that charging

is in progress. When the light stops ﬂashing,

charging of the charging box is complete.

Once the earphones are placed inside the

charging box, charging will begin and a blue

light will start ﬂashing on the carging case

and a red ﬂashing light will light up on each

earphone. When the red light goes out, the

earphones will be fully charged.

Turning on and pairing

e earphones, once you open the case, will

turn on automatically. e earphones must

be connected to the device within 5 minutes,

otherwise they will go into power saving

mode. To activate the pairing mode again,

simply place the earphones in the charging

case, close it and wait a few seconds before

reopening it, following the above procedure

again. Now activate the wireless function

on the device, search for SHAPE1, select it

once identiﬁed and connect it. You will hear

the "CONNECTED" sound when pairing is

completed. If prompted for a password, enter

"0000".

Automatic reconnection

Once the headset and device have been paired

once, they will automatically reconnect when

your device's wireless function is turned on

and within range.

MONO/STEREO function

You can use only one earbud to listen to

music and to take calls. is function (MONO

function) is available for both earbuds. To use

this function remove one earbud from the

charging box. To switch to the stereo mode,

remove at any time the second earbud.

Viceversa to switch to the mono mode, put

back one earbud in the charging box.

Multifunction buttons

Auto

power

oﬀ

1. If connected to a device, after disconnecting

the wireless connection, the headset will

automatically turn oﬀ after 5 minutes.

2. If you don't connect your phone when the

red and blue light ﬂashes, the headset will

automatically turn oﬀ in 5 minutes.

Pairing between left and right earphones

If the connection between the left and right

earphones is lost, put both earphones back

inside the charging box, close it and wait

a few seconds before reopening it. e

earphones will automatically re-connect to

each other. If the process just described

does not work, disconnect the earphones

from your device, wait a few minutes,

then reconnect them (the earphones must

be placed inside the charging box). For

both procedures, it is necessary that the

earphones inside the charging box are

charging, so make sure that the charging

box has a suﬃcient charge level to ensure

the charging of the earphones.

Maintenance

1. Do not use abrasive solvents to clean the

product;

2. Do not attack the product with any kind of

sharp object as it may scratch or damage the

product;

3. Keep the product away from high

temperatures, dust and humidity.

Speciﬁcations:

Wireless version: 5.1

Software: V1.0

Earphones charging time: 1.5h

Box charging time: 2h

Earphones battery Type: Li-polymer Battery

3,7V/30mAh

Box battery Type: Li-polymer Battery

3,7V/250mAh

Microphone Sensitivity: -42±3dB

Speaker Frequency Response: 20Hz~20KHz

Rated Power: 3mW

Max power: 5mW

Wireless range: 10m

Talk time: 3h

Music time: 3.5h

Standby time: 40h

Earphones size: 31*17*16mm

Charging box size: 78*34*16.5mm

Operation temperature: 0~40°C

Weight for earbuds each pc: 3,5g

Weight for charging case: 20,5g

Maximum radiated power: <20mW

Frequency range: 2,4GHz-2,4836 GHz

CUSTOMER’S INFORMATION FOR

RIGHT WASTE OF THIS PRODUCT

(Directive 2013/56/EU)

is marking on the product or its packaging

means that the product at the end of its life,

inlcuding the unremovable battery, must

be separated from other types of waste to

recycle it responsibly.

Safely’s use of this product is guaranteed from

the respect of this instructions manual, keep it

and carefully use it for all life of the product.

e product doesn’t need any kind of technical

maintenance, NEVER DISASSEMBLE IT.

e battery inside the product is integrated

and not replaceable. Don not try to remove

li-ion/polymer battery included in inside the

product because can produce overheat’s

danger, burning and injury. e battery must

be removed only by qualiﬁed professional

techincians, that are able to remove it without

any kind of danger and to recycle it in the

respect of the law. Users should give free end

of life product into the local separate collection

centers or to the retailer, in reason of one to

one, or free if the product size is bigger than

25 cm. Adequated waste disposal permit to

award the product to recycling, treatment

with ecofriendy compatible disposal conduce

to prevent possible harm to the environment

or human health and promote the reuse and/

or product materials recycling. Unauthorized

waste disposal of electronic product, cell and

battery from houseold user involve currency

legislation sanctions.

is product complies with RoHS

2011/65 / EU - 2015/863 / EU.

e Product has the CE mark and

therefore complies with the safety standards

established by the European Union.

Esprinet SpA declares that the product

complies with directive 2014/53 / EU. e

full text of the EU declaration of conformity

is available at the following Internet address:

www.celly.com/Exchange/CELLY-SPA/

Dichiarazioni_di_conformita/SHAPE1/DOC_

SHAPE1.pdf

Celly® is a trademark owned by CELLY

S.p.A.

All brands are registered trademarks of

their respective owners.

Esprinet S.p.A., via Energy Park

20, 20871 Vimercate (MB) -

Italy

Made in China.

User manual

TRUE WIRELESS EARPHONES

Model: SHAPE1

Rev00 - 24.09.2021

Left earphone (L) Right earphone (R)

Play/pause Single click Single click

Reply/end calls Double click Double click

Refuse calls Long press Long press

Previous track Double click //

Next track // Double click

Volume - Long press //

Volume + // Long press

Voice assistant Triple click Triple click

Produkt Specifikationer

Mærke:	Celly
Kategori:	Headset
Model:	SHAPE1
Bredde:	31 mm
Dybde:	17 mm
Højde:	16 mm
Produktfarve:	Hvid
Kontroltype:	Berøring
Opladningstid:	90 min.
Produkttype:	Headset
Bluetooth:	Ja
Kabler inkluderet:	USB Type-C
Pakketype:	Kasse
Bluetooth-version:	5.1
Anbefalet brug:	Opkald/musik
Impedens:	42 ohm (Ω)
Forbindelsesteknologi:	True Wireless Stereo (TWS)
Taletid:	3 t
Bæremåde:	I ørerne
Headset type:	Binaural
Hovedtelefon frekvens:	20 - 20000 Hz
Hovedtelefon følsomhed:	42 dB
Mikrofontype:	Indbygget
Batteridrevet:	Ja
Batteritype:	Indbygget batteri
Batterikapacitet (opladningskasse):	250 mAh
Opladningsetui dimensioner (B x D x H):	78 x 34 x 16.5 mm
Opladeretui vægt:	20.5 g
Opladningskilde:	USB
Trådløs rækkevidde:	10 m
Plug and play:	Ja
Batteriets levetid:	210 min.
Ørekobling:	Intraaural
Akustisk system:	Lukket
Drivertype:	Dynamisk
Højre hørerør batterikapacitet:	30 mAh
Venstre hørerør batterikapacitet:	30 mAh
Venstre hørerør vægt:	3.5 g
Højre hørerør vægt:	3.5 g
Vedvarende afspilningstid, lyd:	3.5 t