Chamberlain 956EVC-P2 Manual


Læs nedenfor 📖 manual på dansk for Chamberlain 956EVC-P2 (4 sider) i kategorien Fjernbetjening. Denne guide var nyttig for 41 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
3-BUTTON REMOTE CONTROLS
MODELS 953EV, 953EV-P2, 953EVC, 953EVC-P2,
956EV, 956EV-P2, 956EVC, AND 956EVC-P2
To prevent possible SERIOUS INJURY or
DEATH from a moving gate or garage door:
ALWAYS keep remote controls out of reach
of children. NEVER permit children to
operate or play with remote controls.
Activate gate or door ONLY when it can be
seen clearly, is properly adjusted and there
are no obstructions to door travel.
ALWAYS keep gate or garage door in sight
until completely closed. NEVER permit
anyone to cross path of moving gate or
door.
For use with Chamberlain 315 MHz or 390 MHz garage door openers manufactured after January 1, 1993.
The garage door opener activates when the programmed button on the remote control is pressed. The
remote control can activate up to three garage door openers.
Make sure the garage door opener has a working light bulb because it is a programming indicator.
LED LED
4
Press and release the Learn
button on the garage door
opener.
3To exit programming mode,
press any remote control
button the button except
that was just programmed.
Install the visor clip.
7
Press the remote control button
programmed in step 2 until the
garage door opener lights flash
or two clicks are heard.
To test, press the programmed
button on the remote control...
1
Within 30 seconds...
The Learn LED will light.
5 6
Press and hold the program button
the remote control until the LED on
the of the remote control front
turns on.
Learn
Button
Click
Click
The garage door
opener will activate.
2Press and release the remote control button you wish to use the
number of times that corresponds with the garage door opener type:
# of Presses Garage Door Opener Type
1
2
3
4
Yellow Learn Button (Security+ 2.0
®)
Purple Learn Button (315 MHz Security+®)
Red/Orange Learn Button (390 MHz Security+®)
Green Learn Button (390 MHz Billion Code)
MODELS 953EV, 953EV-P2,
953EVC AND 953EVC-P2
MODELS 956EV, 956EV-P2,
956EVC AND 956EVC-P2
GARAGE ACCESS SYSTEM
REMOTE
GARAGE ACCESS SYSTEM
KEYCHAIN REMOTE
PREPARE
PROGRAM THE REMOTE CONTROL (953EV, 953EV-P2, 953EVC AND 953EVC-P2)
953EV, 953EV-P2,
953EVC AND
953EVC-P2
956EV,
956EV-P2,
956EVC AND
956EVC-P2
Para Manual en Español ir a:
http://www.chamberlain.com/CatalogResourcesV3/en-us/shared/files/tucmanuals/114A5043SP.pdf
WARNING: This product can expose you to chemicals including lead, which are known to the State
of California to cause cancer or birth defects or other reproductive harm. For more information go
to www.P65Warnings.ca.gov
OROR
Locate the button on Learn
the garage door opener.
NOTE: Your garage door
opener may look different.
Learn
LED
Learn
LED
Learn LED
Locate the Program button on the
remote control.
Program Button
Program Button
Green LED or
Red/Orange
Purple Yellow


Produkt Specifikationer

Mærke: Chamberlain
Kategori: Fjernbetjening
Model: 956EVC-P2

Har du brug for hjælp?

Hvis du har brug for hjælp til Chamberlain 956EVC-P2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Fjernbetjening Chamberlain Manualer

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

SMK-Link

SMK-Link VP3700 Manual

17 December 2024
Metronic

Metronic 495390 Manual

17 December 2024
Metronic

Metronic 495387 ZAP 3 Manual

17 December 2024
Metronic

Metronic ZAP 6 Manual

17 December 2024
EQ-3

EQ-3 HM-RC-19-B Manual

16 December 2024