Clas Ohlson FL-A555 Manual

Clas Ohlson Limpistol FL-A555

Læs gratis den danske manual til Clas Ohlson FL-A555 (4 sider) i kategorien Limpistol. Denne vejledning er vurderet som hjælpsom af 62 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 31.5 anmeldelser. Har du et spørgsmål om Clas Ohlson FL-A555, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
United Kingdom •
www.clasohlson.co.uk
English
1
4
5
67
2
3
Ver. 20220216
Gluing
Use respiratory protection.
Warning: Burnhazard. Themolten adhesive and nozzle reach
temperatures of up to 200 °C. Avoidall skin contact with
thenozzle (1) and molten adhesive whilst working.
1. Grip theglue gun by thehandle (4) and insert aglue stick (3) into thehole (2) at
therear of thegun.
2. Squeeze thetrigger (6) afew times until thefeed mechanism has gripped
thegluestick.
3. Gently squeeze thetrigger to apply molten adhesive to thesurfaces to be
glued together.
4. Release thetrigger and squeeze it again if thetrigger was squeezed all theway
in before you had finished applying glue to thecontact surfaces.
5. Release thetrigger when thesurfaces have been coated withglue.
6. Immediately press thesurfaces together and hold them in position for 15seconds.
7. Let any excess glue cool and remove it with asharpknife.
8. Unplug theglue gun from thewall socket to switch thegunoff.
9. Rest theglue gun on its stand to cool completely before putting itaway.
Warning: Donot attempt to remove theglue stick from thegluegun.
Doingso can result in personal injury and/or damage theproduct.
Care and maintenance
• Always unplug theproduct from thewall socket before cleaning.
• Clean theproduct using alightly moistenedcloth. Useonly mild cleaning
agents, never solvents or corrosive chemicals.
Responsible disposal
This symbol indicates that this product should not be disposed of with
general householdwaste. Thisapplies throughout theentire EU. Inorder
to prevent any harm to theenvironment or health hazards caused by
incorrect waste disposal, theproduct must be handed in for recycling so
that thematerial can be disposed of in aresponsible manner. Whenre-
cycling your product, take it to your local collection facility or contact
theplace of purchase. Theywill ensure that theproduct is disposed of in
anenvironmentally sound manner.
Specifications
Power supply 220−240 V AC, 50 Hz
Power 10 (60) W
Mains lead 1.4 m
Protecon class II
Warm-up me 3–5min
Glue scks Ø 7mm
Weight 0.1 kg
Glue Gun
Art.no 41-2582, 41-2583 Model FL-A555
Please read theentire instruction manual before using theproduct and then save
it for future reference. We reserve theright for any errors in text or images and any
necessary changes made to technicaldata. In theevent of technical problems or
other queries, please contact our Customer Services.
Safety
Symbolguide
Cauon! The nozzle and adjoining surfaces become hot during use.
Contact may cause burns.
Class II product. Double-insulated.
Warning for apossible hazard which could lead to serious personal injury
and/or damage to theproduct if thestated instructions are not followed.
Warning for anelectrical shock hazard.
Unplug theproduct immediately if themains lead has been damaged or
when inspectingit.
Use respiratory protection.
General safety instructions
• This product must not be used by anyone (including children) suffering from
physical or mental impairment. Thisproduct should not be used by anyone that
has not read theinstruction manual unless they have been instructed in its use
by someone who will take responsibility for their safety. Neverlet children play
with theproduct.
• Keep children away from thepackaging materials. Choking hazard.
• Theproduct should not be used if it is in any way damaged or malfunctioning.
• Never attempt to modify theproduct in anyway.
• Any repairs should only be carried out by qualified service technicians.
Electrical safety
Warning for anelectrical shock hazard.
• Do not use theproduct if it is missing parts or if its housing has been
damaged in anyway.
• Do not place theproduct where there is arisk of it falling into water or other
types of liquid.
• Theproduct should only be connected to a220−240 V, 50 Hz electrical outlet.
• Outdoor use of theproduct requires that any wall socket used be equipped with
amax 30 mA RCD. ChecktheRCD before eachuse. Useof anRCD reduces
therisk of electricshock.
• Themains lead should be checked regularly. Neveruse theproduct if themains
lead or plug is damaged.
• If themains lead has been damaged, it must only be replaced by themanufacturer,
authorised service facility or qualified tradesman. Thisis to prevent therisk of
electric shock orfire.
• Never touch themains plug if your hands are moist orwet.
• Always grip theplug when unplugging theproduct, never pull themainslead.
• Never carry or hang theproduct by its mainslead.
Product specific safety instructions
• Place theproduct in astanding position after use and let it cool sufficiently before
putting it away for storage.
• Do not leave theproduct unsupervised when it is connected to anelectrical socket.
• Never cover theproduct when it is connected to anelectrical socket.
• Never expose theproduct to rain or moisture.
• Always disconnect themains lead from thewall socket when you have finished
work or when theproduct is not beingused.
• Unplug theproduct and let it cool completely before putting it away for storage.
• Both theglue and nozzle become very hot duringuse. Thiscan cause burn injuries.
Rinse any burn with cold water and keep it under running water for sometime.
• Only use glue sticks specifically designed for this product.
• Always place theproduct on its stand when it is not inuse.
Product description
Contents
• 1 × gluegun
• 2 × glue sticks, Ø 7×100mm
Application
This glue gun can be used for gluing wood, paper, cardboard and certain plastic materials.
Gluegun
1. Nozzle
2. Glue stickhole
3. Gluestick
4. Handle
5. Mainslead
6. Trigger
7. Stand
Instructions foruse
Preparations
• Keep thework area clean and welllit.
• Clean thecontact surfaces. Thesurfaces should be dry and clear of dust or
grease. Smooth surfaces should be roughed before gluing.
• Plug theglue gun into anelectrical socket and rest it on its stand (7) for 3–5minutes
to let it reach operating temperature.

Produkt Specifikationer

Mærke: Clas Ohlson
Kategori: Limpistol
Model: FL-A555

Har du brug for hjælp?

Hvis du har brug for hjælp til Clas Ohlson FL-A555 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Limpistol Clas Ohlson Manualer

Clas Ohlson

Clas Ohlson JS-905JQ Manual

14 Januar 2025
Clas Ohlson

Clas Ohlson KL1039A Manual

1 September 2024
Clas Ohlson

Clas Ohlson FL-A555 Manual

24 Juli 2024

Limpistol Manualer

Nyeste Limpistol Manualer

Rapid

Rapid EG Point EG130 Manual

6 Oktober 2025
Rapid

Rapid G1000 Manual

6 Oktober 2025
Draper

Draper 70836 Manual

2 Oktober 2025
NEO Tools

NEO Tools 17-096 Manual

29 September 2025
NEO Tools

NEO Tools 17-084 Manual

29 September 2025
NEO Tools

NEO Tools 17-083 Manual

28 September 2025
Draper

Draper 03359 Manual

23 September 2025
Draper

Draper D20 18097 Manual

23 September 2025
Draper

Draper Expert 16157 Manual

23 September 2025
Cocraft

Cocraft HG 200 Manual

7 September 2025