Clas Ohlson JS-905JQ Manual


Læs nedenfor 📖 manual på dansk for Clas Ohlson JS-905JQ (6 sider) i kategorien Limpistol. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/6
English
GREAT BRITAIN
customer service tel: 0845 300 9799 customerservice@clasohlson.co.uke-mail:
internet: www.clasohlson.com/uk
1 2 3 4 5
Ver. 20140304
Glue Gun
Art.no. 18-3165 Model JS-905JQ-UK
40-7946 JS-905JQ
Please read theentire instruction manual before use and save
it for future reference. Wereserve theright for any errors in text
or images and for making any necessary technical changes to
this document. If you should have any questions concerning
technical problems please contact our Customer Services.
Safety
Thetool can become afire risk if used improperly.
Please take thefollowing into consideration:
Place theglue gun in astanding position after use and let it
cool sufficiently before putting it away for storage.
Never leave theglue gun unattended when in operation.
Never expose theglue gun to rain or moisture.
Thepower lead should be checked regularly. Neveruse
thedevice if thepower lead or plug is damaged.
If thepower lead is damaged it may only be changed by
themanufacturer or their service facility.
This product must not be used by anyone (including
children) suffering from physical or mental impairment.
Thisproduct should not be used by anyone that has
not read theinstruction manual unless they have been
instructed in its use by someone who will take responsibility
for their safety.
Never let children play with theproduct.
Both theglue and glue gun become hot duringuse.
Thiscan cause burn injuries. Ifthis happens, rinse theburn
with cold water and let it run over theburn for sometime.
Make sure that power from thewall socket corresponds to
theglue gun’s specified voltage.
Only use glue sticks compatible with thegluegun.
Always place theglue gun on its stand when it is not inuse.
Connect thetool to themains via aresidual current device
(RCD). AnRCD will significantly reduce thechances of you
receiving anelectricshock.
Product description
Areas ofuse
This glue gun can be used for gluing wood, paper, cardboard
and certain plastic materials.
Preparations
Gluegun
1. Insert aglue stick into theinsert hole asshown. Pushit in as
far as it willgo.
1. Nozzle
2. Supportstand
3. Trigger
4. Glue stick inserthole
5. Handle
2. Connect theplug to awall socket.
Cleaning surfaces
Clean thesurfaces to be glued before starting. Thesurfaces
should be dry and free of dust and grease. Smooth surfaces
should be roughed before gluing.
Gluing
1. Let theglue gun warm up for about 4min.
2. Press thetrigger to feed theglue as thegluestick
begins tomelt.
3. Apply theglue to those surfaces you wish to adhere.
4. Immediately press thesurfaces together and hold them
in position for 15 seconds.
5. Unplug theglue gun from thewall socket.
6. Let any excess glue cool and remove it with asharpknife.
Care and maintenance
Always unplug thedevice from thewall socket before cleaning.
Wipe theglue gun clean with adamp cloth when needed.
Never use abrasive cleaning agents or solvents.
Disposal
Follow local ordinances when disposing of this product. Ifyou are
unsure of how to dispose of this product, please contact your
municipality.
Specifications
Power supply 230 V AC, 50 Hz
Power 10–60 W
Protection class II
Glue sticks 7×100 mm (2 included)
Warm-up time Approx. 4min
Weight 0.1kg


Produkt Specifikationer

Mærke: Clas Ohlson
Kategori: Limpistol
Model: JS-905JQ

Har du brug for hjælp?

Hvis du har brug for hjælp til Clas Ohlson JS-905JQ stil et spørgsmål nedenfor, og andre brugere vil svare dig