Club 3D CSV-7300 Manual

Club 3D Splitter CSV-7300

Læs nedenfor 📖 manual på dansk for Club 3D CSV-7300 (2 sider) i kategorien Splitter. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
CSV-7300 QUICK INSTALLATION GUIDE
Thank you for purchasing our CSV-7300 Product.
After unpacking the product, please make sure you have all the items provided and checked for any damages. In case of any
missing/damaged parts please inform your supplier immediately.
You should have :
• CSV-7300 MST Hub
• 1x USB Type A cable,
• Quick Install Guide
Please make sure your Host System has the latest drivers updates installed before installing the MST Hub
- Connect your preferred Display(s) to the designated connector(s) one by one and power on your Display unit(s)
- Connect the USB Type A connector to a Type A connector for powering the MST Hub
- connect the DP connector to the source.
In case you have any problems with obtaining the correct images on your displays,
Please press the RESET button, for min. 1 sec., at the bottom side of the CSV-7300.
Allow some time for the MST Hub to perform the reset for all three ports.
For any Questions please check our forum section on our
website www.club-3d.com
Reset Button
USB Type A power cable Connection


Produkt Specifikationer

Mærke: Club 3D
Kategori: Splitter
Model: CSV-7300

Har du brug for hjælp?

Hvis du har brug for hjælp til Club 3D CSV-7300 stil et spørgsmål nedenfor, og andre brugere vil svare dig