COLBOR Power 99 Pro Manual

COLBOR Ikke kategoriseret Power 99 Pro

Læs nedenfor 📖 manual på dansk for COLBOR Power 99 Pro (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
It is recommended to use in the temperature of 0~40℃ to ensure the
best performance of the battery.
D-Tap outputs DC 14.8V, maximum output 216W While the battery
is used on the camera, it can also output 14.4V DC to power other
devices such as interview lights.
Standard USB outputs DC 5V 2A, maximum output 10W.
USB-C outputs DC 20V(max), maximun output 65W.
USB-C Input&Output
② USB-A Output
③ D-tap Input&Output
④ V-Mount
⑤ BP Electrode Interface
⑥ OLED Screen
⑦ Switch Button
U: Battery Voltage
I: Charging and Discharging Current
T: Remaining Time of Charge/Discharge
Current Battery Power
Notice about Remaining Time
The Remaining Time is calculated based on current of all gears
powered by the battery, the algorithm will capture data every 100ms
and average the result in last few seconds.
The predicted Remaining Time is accurate given stable current, you
may check the time again by pressing the switch button after adding/
removing gears.
Thank you for choosing COLBOR product. Please read this manual
carefully before use and follow all instructions mentioned herein.
Power 99 Pro User Manual
TipsforBatteryMaintenance Appearance
Charging through Electrode interfaces
It is recommended to use professional V-Mount charger to charge this
battery.
Charging through D-Tap
It is recommended to use professional charger to charge through the
D-TAP interface. Please note that the positive and negative poles of
the D-TAP interface should not be reversed when charging.
Charging through USB-C
It is recommended to use 65W charger with PD protocol to minimize
the charging time.
Charging Instructions
Discharge Instructions
Package List
Warranty
Warranty rules
1. From the date of purchase, the product will be warranted for two
years for any problem related to product quality.
2. You may contact the retailer for refund or replacement if you are not
satised of the performance of the product within 30 days from the
date of purchase.
Please note the following circumstances are not within the
scope of free maintenance.
1. Product malfunction or damage caused by failure to install,
use,maintain or store according to the instructions.
2. Product damage caused by disassembly / maintenance without
authorization.
3. The warranty period has expired.
4. Product damage due to force majeure factors (such as earthquake,
ood, re, lightning strike, etc.) or articial damage.
Disclaimer
We will not take responsibility for product damages or accidents caused
by product due to users' misuse behavior such as overheating, short
circuit intentionally, dispose of in re, etc..
Room 2401, 24 / F, South Tower, Lisheng Plaza, No. 68 Huadi
Avenue, Liwan District, Guangzhou, China, 510000
support@colborlight.com
www.colborlight.com
Guangzhou Zhiying Technology Co., Ltd
Power 99 Pro
V-Mount Battery x1
User
Manual x1
USB-C
Charging Cable x1
Voltage
Capacity
Output
Power
Dimensions
Weight
14.4V
99Wh,6875mAh
BP
D-TAP
USB-C
USB
73mm*55mm*100mm
540g
14.4V 15A (Max)
14.4V 15A (Max)
5V / 9V / 12V / 20V(Max) 3.25A, 65W
Protocol:
1.BC1.2, IOS and SAMSUNG
2.QC2.0,QC3.0,QC3+
3.FCP,SCP,AFC,VOOC
4.PD3.0
5V 2.1A
Specications
COLBOR Power 99 Pro is made with eight units of Grade-A 18650
battery cells runs under BMS chips (Battery Management System). It is
perfectly safe with Over Charge/Discharge, Over Current/Voltage, Over
Heat and Short Circuit protection.
With Unique Balance Cell Algorithm, each battery cell is tuned to same
voltage level during charging /discharging process to ensure a long
recycle life. Please follow the below instructions to better extend the
longevity of COLBOR Power 99 Pro:
1. Please Store the battery at temperatures between 5 ℃ and 20 ℃
(41 ℉ and 68 ).
2. The battery will provide a best recycle life keeping between 10% to
90% capacity, please remain more than 50% of power when stored or
unused for an extended period and do not always charge to 100%
3. The runtime of your battery will vary depending on the powered
devices and the applications that you run, you may also refer to the
remaining percentage of the battery to get an accurate assumption of
time.
4. Consider replacing the battery with a new one if you note either of
the following conditions:
5. If the battery is stored or otherwise unused for an extended period,
be sure to follow the storage instructions in this manual.
The battery runtime drops below 80% compare to original runtime.
The charge time of battery increases signicantly for more than 50%.
Charge or discharge the battery to approximately 50% of capacity
before storage.
Charge the battery to approximately 50% of capacity at least once
every six months.
Store the battery at temperatures between 5 ℃ and 20 ℃ (41 ℉ and
68 ℉ ).
The deviation of the Remaining Time could be signicant if the
battery has power lower than 10% or more than 90%, please also
refer to the remaining percentage to get an accurate assumption of
time.


Produkt Specifikationer

Mærke: COLBOR
Kategori: Ikke kategoriseret
Model: Power 99 Pro

Har du brug for hjælp?

Hvis du har brug for hjælp til COLBOR Power 99 Pro stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret COLBOR Manualer

COLBOR

COLBOR PG99 Manual

4 December 2024
COLBOR

COLBOR PB74 Manual

1 December 2024
COLBOR

COLBOR Power 99 Pro Manual

1 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer