Conair 261RN Manual

Conair niet gecategoriseerd 261RN

Læs nedenfor 📖 manual på dansk for Conair 261RN (2 sider) i kategorien niet gecategoriseerd. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

translucent

turbo styler

1875 WAT T S

The Conair

Translucent Turbo Styler is very effective,

at lower temperatures. It dries hair fast witheven

maximum styling control.

select your setting

Instruction & Styling Guide

Model 261

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially when

children are present, basic safety precautions

should always be followed, including the following:

READ ALL INSTRUCTIONS

BEFORE USING

KEEP AWAY FROM WATER

DANGER – Any hair dryer is electrically

live even when the switch is off.

To reduce the risk of death or injury by

electric shock:

1. Always unplug it immediately after using.

2. Do not use while bathing or in a shower.

3. Do not place or store appliance where it can

fall or be pulled into a tub or sink.

4. Do not place in, or drop into, water or

other liquid.

5. If an appliance falls into water, unplug it imme-

diately. Do not reach into the water.

WARNING – To reduce the risk of

burns, electrocution, fire, or injury to persons:

1.Thisapplianceshouldneverbeleft unattended

when plugged in.

2. This appliance should not be used by, on, or near

children or individuals with certain disabilities.

3. Use this appliance only for its intended

use as described in this manual. Do not use attach-

ments not recommended by the manufacturer.

4. Never operate this appliance if it has a dam-

aged cord or plug, if it is not working properly,

if it has been dropped, damaged, or dropped

into water. Return the appliance to a Conair

Service Center for examination and repair.

5. Keep the cord away from heated surfaces. Do

not pull, twist, or wrap line cord around dryer,

even during storage.

6. Never block the air openings of the appliance or

place it on a soft surface, such as a bed or couch,

where the air openings may be blocked. Keep the

air openings free of lint, hair, and the like.

7. Never use while sleeping.

8. Never drop or insert any object into any open-

ing or hose.

9. Do not use outdoors or operate where

aerosol (spray) products are being used

or where oxygen is being administered.

10. Do not use an extension cord to operate

dryer.

11. Do not direct hot air toward eyes or other

heat-sensitive areas.

12. Attachments may be hot during use. Allow

them to cool before handling.

13. Do not place appliance on any surface while

it is operating.

14. While using the appliance, keep your hair out

of it. Keep your hair away from the air inlets.

15. Do not use with voltage converter.

SAVE THESE

INSTRUCTIONS

OPERATING

INSTRUCTIONS

This appliance is intended for household use

only. Use on Alternating Current (60 hertz) only.

Standard Dryers are designed to operate at 110

to 125 volts A.C.

This appliance has a polarized plug (one blade

is wider than the other). As a safety feature,

this plug will fit in a polarized outlet only

one way. If the plug does not fit fully in the

outlet, reverse the plug. If it still does not fit,

contact a qualified electrician. Do not attempt

to defeat this safety feature.

IMPORTANT

1875 WATT OPERATING GUIDE

Use of this dryer on the same circuit or fuse with

other electrical products or appliances may trip

a 15 amp circuit breaker or blow a 15 amp fuse.

NEVER replace the fuse with one rated higher

than the capacity of the circuit. Doing so

could result in an electrical fire.

CHECK ALCI SAFETY FEATURE EVERY TIME

YOU USE APPLIANCE.

This appliance is equipped with an Appliance

Leakage Circuit Interrupter (ALCI), a safety fea-

ture that renders it inoperable under some

abnormal conditions, such as immersion in

water. To make sure the ALCI is functioning

properly, perform the following test. The purpose

of this test is to allow you to make sure the water

sensing system (ALCI) is working.

1. Plug in the appliance and press test button on

plug (See appropriate diagram below).

2. The appliance will stop working. There will be an

audible click and reset button will pop out.

3. To reset ALCI with a reset button, unit should

be unplugged. Then push reset button in, and

reinsert plug into outlet.

Reset Reset

Test Test

4. If ALCI is not functioning properly, return

appliance to nearest service center.

5. It is important that if immersion occurs, this

unit be brought to a service center. Do not try

to reset.

6. Be sure to repeat test every time you use the

unit to confirm ALCI is operational.

Should the appliance go off and the reset but-

ton pop up during use, this could indicate a

malfunction in the unit. Remove plug from outlet

and allow the appliance to cool. Reinsert plug

into outlet.

The appliance should then function normally.

If not, return to an authorized Conair Service

Center for evaluation and repair.

SUPER STYLING GUIDE

Your best looks begin with a good haircut that’s

well maintained. Always treat hair right with

superior quality shampoos, conditioners, and

finishing products.

DRYING BASICS

1. Shampoo and condition hair with products

of your choice. Rinse thoroughly. Towel dry hair

to remove excess moisture. Section hair.

2. The dryer has 3 heat/2 speed settings, as well

as a cool shot – you can select the high setting

for maximum volume or a low cool setting to

lock in a style.

3. If you use the dryer with a styling brush (the

professional way to style and dry at the same

time), brush each strand from underneath as

you direct hot air to top of strand, always moving

slowly and steadily up and down each strand.

This way, you’ll be aiming heat at your hair, not

at your scalp.

4. For quick touch-ups between shampoos, mist

hair to dampen it before styling with dryer.

5. When using your dryer to create curls and

waves, scrunch hair and dry almost completely on

a low temperature setting, then finish styling by

switching to cool.

6. To smooth hair, snap on the straightening pic

attachment to the nozzle. Be sure dryer is off and

cool when changing attachments as they may

be hot.

BODY & VOLUME

To create extra volume,

turn head upside down

while drying. Position the

airflow toward the roots for

maximum lift. When hair

is dry, toss

head back and

brush

hair into place.

STRAIGHTENING

Work with hair in sections

when creating a super

straight look. Use the

pic attachment which

snaps onto the nozzle.

Using a large round brush

(approximately 2" diameter),

hold hair taut in each

section and bend ends

slightly under as you dry.

MAKING WAVES

Tousled, natural-looking

waves are easily created

by grasping hair at the

roots and scrunching

between fingertips

while drying.

speed/temp.

hair type

low/cool

delicate, thin, or easy-to-style hair

low/warm

average-to-thick or treated hair

high/warm thick, or wavy hair

high/hot

hard-to-style hair

cool shot

sets all hair types

GETTING TO KNOW YOUR DRYER

1875 Watts

Cool Shot Button

3 Heat/2 Speed Settings

Hang

Ring

Snap-on 2-in-1

Straightening Pic

Concentrator

GROUND

AULT

CIRCUIT

INTERRUPTERS

...can save a life!

IF YOU MUST USE YOUR HAIR DRYER IN THE

BATHROOM, INSTALL A GFCI* NOW!

Your local electrician can help you decide which

type is best for you—a portable unit that

plugs into the electrical outlet or a permanent

unit installed by your electrician. The National

Electrical Code now requires GFCI’s in the

bathrooms, garages, and outdoor outlets of all

new homes.

WHY DO YOU NEED A GFCI? Electricity and water

don’t mix. If your hair dryer falls into water while it’s

plugged in, the electric shock can kill you…

even if

the switch is “off.” A regular fuse or circuit break-

er won’t protect you under these

circumstances. A GFCI offers you

far greater protection.

A GFCI can save your life! Compared to

that, the price is small! Don’t wait... install

one now!

*GFCI is a sensitive device which reacts immedi-

ately to a small electric current leak by stopping

the electricity flow.

USER

MAINTENANCE

Your dryer is virtually maintenance-free. No

lubrication is needed. For proper operating per-

formance, the dryer must be kept clean. When

cleaning is needed, unplug the cord, allow to cool

and clean dust and lint from air intake openings

with a small brush or the brush attachment of a

vacuum cleaner. The outer surface of the dryer

should be wiped clean with a dry cloth only.

Blocked or clogged air intake vents will

cause the dryer to overheat. If overheating

occurs, an automatic safety device will shut

the dryer or the heat off to prevent damage or

personal injury. If the unit or the heat cycles off,

unplug the cord and allow the dryer to cool for

10 to 15 minutes before restarting. Make sure

the air vents are clean.

CAUTION

NEVER allow the power supply cord to be pulled,

twisted, or severely bent. Never wrap the cord

tightly around the dryer. Damage will occur at the

high flex point of entry into the dryer, causing it

to rupture and short. Inspect the cord frequently

for damage. Stop use immediately if damage is

visible or unit stops or operates intermittently.

If the cord or dryer is damaged or does not operate

properly, return it for repair to an authorized Conair

service representative only. No repairs should be

attempted by the consumer.

STORAGE - Important

When not in use, your dryer should be

disconnected, allowed to cool and stored in a

safe, dry location, out of reach of children. Do

not wrench the line cord or wrap it around

the dryer. Allow the cord to hang or lie loose and

straight at the point of entry into the dryer.

LIMITED TWO YEAR WARRANTY

Conair will repair or replace, at our option, your

appliance free of charge for 24 months from the

date of purchase if the appliance is defective in

workmanship or materials.

To obtain service under this warranty, return the

defective product to the service center nearest

you, together with your sales slip and $5.00 for

postage and handling. California residents need

only provide proof of purchase and should call

1-800-3-CONAIR for shipping instructions. In the

absence of a receipt, the warranty period shall be

24 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR

LIABILITIES, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTY OF MERCHANTABILI-

TY AND FITNESS FOR A PARTICULAR PURPOSE,

SHALL BE LIMITED IN DURATION TO THE 24

MONTH DURATION OF THIS WARRANTY. Some

states do not allow limitations on how long an

implied warranty lasts, so the above limitations may

not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR

ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES FOR BREACH OF THIS OR ANY

OTHER WARRANTY, EXPRESS OR IMPLIED,

WHATSOEVER. Some states do not allow the

exclusion or limitation of special, incidental, or

consequential damages, so the above limitation

may not apply to you. This warranty gives you

specific legal rights, and you may also have other

rights which vary from state to state.

SERVICE CENTER

CONAIR CORPORATION

Service Department

7475 N. Glen Harbor Blvd

Glendale, AZ 85307

09NP15409 IB-9491

Produkt Specifikationer

Mærke:	Conair
Kategori:	niet gecategoriseerd
Model:	261RN

Har du brug for hjælp?

Hvis du har brug for hjælp til Conair 261RN stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

niet gecategoriseerd Conair Manualer

Conair Man GMTL6000 Manual

6 September 2024

Conair LNT1 Manual

6 September 2024

Conair Man GMT189R Manual

6 September 2024

Conair CD117NN Manual

2 September 2024

2 September 2024

2 September 2024

2 September 2024

2 September 2024

Conair PG1000L Manual

2 September 2024

Conair FR02 Manual

2 September 2024

niet gecategoriseerd Manualer

Nyeste niet gecategoriseerd Manualer

IFM O6T207 Manual

16 September 2024

Güde LG 18-30 Manual

16 September 2024

Uniden WPP 15W + D800 Manual

16 September 2024

JUNG BTCCD508 Manual

16 September 2024

Samsung AC036TN4PKC Manual

16 September 2024

Nedis ACON2503AT Manual

16 September 2024

16 September 2024

16 September 2024

16 September 2024

16 September 2024