Conair CS4GNR Manual

Conair Ikke kategoriseret CS4GNR

Læs nedenfor 📖 manual på dansk for Conair CS4GNR (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

¾ in.& 2 in.

flat irons

Instruction & Styling Guide

Model CS4VCSR/CS19VCSR

Styling

Brand

For your safety

and continued

enjoyment of this

product, always read

the instruction book

carefully before using.

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially when

children are present, basic safety precautions should

always be followed, including the following:

READ ALL INSTRUCTIONS

BEFORE USING

KEEP AWAY FROM WATER

DANGER -

Any appliance is electrically live

even when the switch is off. To reduce the risk

of death by electric shock:

Always unplug appliance immediately after

using.

2. Do not use while bathing or in a shower.

3. Do not place or store appliance where it can

fall or be pulled into a tub or sink.

4. Do not place in, or drop into water or other liquids.

5. If an appliance falls into water, unplug it

immediately. Do not reach into the water.

WARNING -

To reduce the risk of burns,

electrocution, ﬁre, or injury to persons:

1. This appliance should never be left unat-

tended when plugged in.

2. Do not pull, twist, or wrap line cord around

appliance, even during storage.

3. This appliance should not be used by, on

or near children or individuals with certain

disabilities.

4. Use this appliance only for its intended use, as

described in this manual. Do not use attachments

not recommended by the manufacturer.

5. Never operate this appliance if it has a

damaged cord or plug, if it is not working

properly or if it has been dropped or

damaged, or dropped into water. Return the

appliance to an authorized service center for

examination and repair.

6. Keep the cord away from heated surfaces.

7. Never use while sleeping.

8. Never drop or insert any object into any

opening or hose.

9. Do not use outdoors or operate where

aerosol (spray) products are being used or

where oxygen is being administered.

10. Unit is hot when in use. Do not let heated

surfaces touch eyes or skin.

11. Do not place the heated unit directly on

any surface while it is hot or plugged in.

12. Never block the air openings of the appliance

or place on a soft surface such as a bed or

couch, where the air openings may be blocked.

Keep the air openings free of lint and other

debris.

13. Do not use an extension cord with this

appliance.

14. Do not touch hot surfaces of the

appliance. Use handles or knobs.

15. Before plugging in, read the information

about dual voltage contained in the instruction

section of this manual.

16. Do not attempt to touch the housing of your

appliance near the straightening plates, as it is

hot when in use.

SAVE THESE

INSTRUCTIONS

OPERATING

INSTRUCTIONS

This ﬂat iron is intended for household use. This

unit is designed to operate at 120/240 volts AC.

Use on Alternating Current (50/60 hertz) only.

This appliance has a polarized plug (one blade

is wider than the other). As a safety feature,

this plug will ﬁt in a polarized outlet only one

way. If the plug does not ﬁt fully in the outlet,

reverse the plug. If it still does not ﬁt, contact

a qualiﬁed electrician. Do not attempt to defeat

this safety feature.

DUAL VOLTAGE

This ﬂat iron will automatically adjust to the

proper voltage. Use an adapter plug with correct

conﬁguration prior to use in outlet.

STRAIGHTENING BASICS

Plug the ﬂat iron cord into any household outlet

(120/240V). Press ON/OFF button. Red light will

blink until it reaches desired temperature setting

and then becomes solid. To activate Turbo Heat®

press button and green light will go on and in-

crease plate temperatures up to 20° °C/36 F. To

turn off, press ON/OFF button again until red

light goes out. Never leave your ﬂat iron on and

unattended. However, should you fail to turn

the unit off, it will shut itself off automatically

within 60 minutes.

WARNING:

The flat iron’s ceramic-coated plates

will get very hot within a few seconds and should

not be placed in contact with the skin after the

flat iron has been turned on.

Start with a hair section that is 2 inches (5 cm)

wide and no more than 1/2 inch (1.25 cm) thick.

Open the iron and place a hair section between

the two hot plates, close to the scalp. Trap hair

between the plates by ﬁrmly squeezing the

handles together. While maintaining the tension,

slowly pull the iron down along the hair section

toward the end. At the end of hair section, release

the pressure on the handle and allow the hair to

slide out. Repeat process on additional sections

of hair until you achieve the hair style you desire.

It may be necessary to repeat process on certain

areas, depending on the texture of your hair.

Some experience is necessary when learning to

use this ﬂat iron. After using the iron several

times, you will learn the ideal way to straighten

and style your hair easily.

For faster styling results, we have added

a unique optional Turbo Heat® ON/OFF

feature. Press the Turbo Heat button to deliver up

to 20°C/36°F more heat in the highest setting,

for maximum styling performance.

NOTE: Please refer to the temperature setting

guide for heat settings.

STYLING WITH THE NEW EASY-GLIDE

FLOATING CERAMIC-COATED PLATE

The plate of your new ﬂat iron is designed with a

little give, to “ﬂoat” in your iron. This provides

better contact with hair, eliminating gaps, for

straighter results. The easy-glide ceramic surface

is the one of the latest – and best – technological

advances in hair appliances. The ceramic even

heat distribution produces the ultimate in healthy,

shiny, silky-looking hair. You’ll ﬁnd that hair glides

easily over the surface of the plates as you’re

straightening, and that it is easier to clean styling

products residue, etc. off the plates after each

use. The ceramic surface also helps smooth down

ﬂyways and frizzies. As you smooth your hair, heat

is evenly distributed so that the style you create

has a salon-perfect, silky smooth, shiny ﬁnish.

Hair also glides right through the plates after it’s

straightened.

And that’s not all. Conair's professional salon

standards of engineering provide you with a Uni-

form Heat Recovery System to maintain the ﬂat

iron at a constant temperature.

A constant surge of power ensures that heat is

continuously delivered for optimal styling results,

unlike other units that lose heat during use. It

provides consistent styling power so that every

strand of hair is set with the same level of heat

for uniform results and a perfect ﬁnish.

Ceramic technology is a pleasure to work with,

makes styling your hair easier and provides

professional results.

USING INSTANT HEAT, THE 25 VARIABLE

TEMPERATURE SETTINGS AND

UNIFORM HEAT RECOVERY SYSTEM

The 400˚F high heat uniform heat recovery system

provides fast, professional salon styling results at

home. This ﬂat iron features Conair’s Instant Heat

technology. It quickly heats up to the temperature

you’ve selected for your hair type and is then ready

to use.

Within this Instant Heat technology there are 25

temperature settings for every type of hair, from

the ﬁnest to the curliest and most resistant.

TEMPERATURE SETTING GUIDE

TEMP. CONTROL HAIR TYPE

Low 1–8 Delicate, thin, easy-to-straighten hair

Medium 9–14 Average to thick or treated hair

Med-High 15–20 Thick or wavy hair

High 21–25 Hard-to-straighten hair

Turbo Heat® Up to 20°C/36°F burst of heat

for difficult styling spots

TURNS CURLS INTO SMOOTH HAIR IN SECONDS

Before After

GET TO KNOW YOUR

CERAMIC FLAT IRON

Cool tip

Model CS4VCSR

¾ in. (19 mm) ﬂoating

ceramic-coated pl

ariable

gs –

°F

ind

lig

Model CS19VCSR

2 in. (51mm) plates

USER MAINTENANCE

Your ﬂat iron is virtually maintenance free. No

lubrication is needed. Keep all vents and openings

clear of dirt and dust. If cleaning becomes nec-

essary, disconnect the unit from the power

source, allow to cool and wipe exterior with a

cloth. If any abnormal condition occurs, unplug

the unit, allow it to cool, and return it for repair

to an authorized service representative only.

No repairs should be attempted by the consumer.

CAUTION

NEVER allow the power supply cord to be pulled,

twisted, or severely bent. Never wrap the cord

tightly around the appliance. Damage will occur

at the high ﬂex point of entry into the appliance,

causing it to rupture and short. Inspect the cord

frequently for damage. Stop use immediately if

damage is visible or if unit stops or operates

intermittently.

STORAGE

When not in use, your appliance is easy to store.

Allow appliance to cool, then store in a safe,

dry location, out of reach of children. Do not

jerk or strain cord at plug connections.

WARNING:

IF YOU THINK

THE POWER IS OFF

WHEN THE SWITCH

IS OFF,

YOU’RE WRONG.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are

a dangerous combination. But did you know

that an electric appliance is still electrically

live even if the switch is off? If the plug is in,

the power is on. So when you are not using

your appliances, keep them unplugged.

ALWAYS UNPLUG

SMALL APPLIANCES

LIMITED TWO-YEAR WARRANTY

Conair will repair or replace, at our option, your

appliance free of charge for 24 months from the

date of purchase if the appliance is defective in

workmanship or materials.

To obtain service under this warranty, return the

defective product to the service center listed on

back, together with your sales slip and $7.50 for

postage and handling. California residents need

only provide proof of purchase and should call

1-800-3-CONAIR for shipping instructions. In the

absence of a receipt, the warranty period shall

be 24 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS,

OR LIABILITIES, INCLUDING BUT NOT

LIMITED TO THE IMPLIED WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED

IN DURATION TO THE 24-MONTH DURATION

OF THIS WRITTEN, LIMITED WARRANTY. Some

states do not allow limitations on how long an

implied warranty lasts, so the above limitations

may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR

ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES FOR BREACH OF THIS OR ANY

OTHER WARRANTY, EXPRESS OR IMPLIED,

WHATSOEVER. Some states do not allow the

exclusion or limitation of special, incidental, or

consequential damages, so the above limitation

may not apply to you. This warranty gives you

speciﬁc legal rights, and you may also have

other rights, which vary from state to state.

Please register this product at:

www.conair.com/registration

Service Center

Conair Corporation

Service Department

7475 N. Glen Harbor Blvd.

Glendale, AZ 85307

For information on any Conair product, call

1-800-3-CONAIR or visit us on the web at:

www.conair.com

150 Milford Road, East Windsor, NJ 08520

7475 N. Glen Harbor Blvd., Glendale, AZ 85307

11PA125929 IB-11065

Produkt Specifikationer

Mærke:	Conair
Kategori:	Ikke kategoriseret
Model:	CS4GNR

Har du brug for hjælp?

Hvis du har brug for hjælp til Conair CS4GNR stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Conair Manualer

Conair NPTCCA01 Manual

10 December 2024

Conair True Glow PB8NPRF Manual

10 December 2024

Conair NPTCCA02 Manual

10 December 2024

Conair MiniPRO CS80N Manual

1 Oktober 2024

Conair MASK2 Manual

1 Oktober 2024

Conair skn SFB11GK Manual

1 Oktober 2024

Conair Man GMTL6000 Manual

6 September 2024

Conair LNT1 Manual

6 September 2024

Conair Man GMT189R Manual

6 September 2024

Conair InfinitiPRO 998 Manual

3 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg KIT6PX Manual

23 December 2024

Smeg KIT6CX Manual

23 December 2024

Smeg GTA-6 Manual

23 December 2024

Lucide Casper i 79166/19/12 Manual

23 December 2024

Lucide Merlina 78193/30/66 Manual

23 December 2024

Lucide Pippa 77583/81/30 Manual

23 December 2024

Lucide Pia 45380/04/30 Manual

23 December 2024

Lucide Pia 45280/01/30 Manual

23 December 2024

Lucide Anaka 45179/03/30 Manual

23 December 2024

Lucide Zych 45156/01/97 Manual

23 December 2024