Conair GMT980 Manual


Læs nedenfor 📖 manual på dansk for Conair GMT980 (3 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
Respect the Ritual®
Model GMT980
CLOSE TRIM PRECISION
F L E X H E A D B E A R D & S T U B B L E T R I M M E R
W I T H P R E M I U M E T C H E D B L A D E S
Instruction Booklet
For your safety and continued enjoyment
of this product, always read the instruction
booklet carefully before using.
GMT980 IB-17443_9-30-21.indd 2 2021/9/30 3:19 PM
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, take basic safety
precautions, including the following:
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
FOR HOUSEHOLD
USE ONLY
DANGER Any appliance is
electrically live, even when the switch is off.
To reduce the risk of death or injury by
electric shock:
1. Unplug this appliance from electrical
outlet immediately after using (except when
charging unit).
2. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
3. Do not use while bathing or in the shower.
4. Do not place in, or drop into water or other
liquids.
5. If appliance has fallen into water, do not
reach for it. Unplug immediately.
6. Unplug this appliance before cleaning.
DO NOT REACH
INTO THE WATER
WARNING To reduce the risk of
burns, electric shock, fire, or injury to persons:
1. Never leave a plugged-in appliance
unattended.
2. Use close supervision when the appliance is
used by, on or near children or individuals with
certain disabilities.
3. Use this appliance only for its intended
purpose as described in this manual. Do not
use attachments not recommended by the
manufacturer. Do not use an extension cord to
operate this appliance.
4. Keep the cord away from heated surfaces.
5. Do not pull, twist or wrap the cord around
the appliance.
6. Never drop or insert any object into any
opening on the appliance.
7. Do not use this appliance with a damaged
or broken comb or with teeth missing from the
blades, as injury may occur. Before use, make
certain blades are aligned properly and oiled.
8. Do not use outdoors or operate where
aerosol (spray) products are being used or
where oxygen is being administered.
9. Never operate the appliance with the air
openings blocked or while on a soft surface,
such as a bed or couch, where the air openings
may be blocked. Keep the air openings free of
lint, hair, and other debris.
10. Always attach plug to appliance first, then
to outlet. To disconnect, turn all controls to
OFF, then remove plug from outlet.
11. Avoid letting skin come into direct contact
with moving blades.
12. Do not short the polarity (output cord);
ensure that jack is plugged into the unit before
plugging the adapter into outlet.
13. This power unit is intended to be correctly
oriented in vertical floor mount position.
14. This appliance is not a toy. Keep away
from children.
15. For connection to a power supply not in the
U.S.A., use an attachment plug adapter of the
proper configuration for the power outlet.
FEDERAL COMMUNICATIONS
COMMISSION NOTICE
WARNING: Changes or modifications
to this unit not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
SUPPLIER’S DECLARATION
OF CONFORMITY
Brand: Conairman®
Model No.: GMT980
Description: Trimmer
Responsible Party: Conair LLC,
1 Cummings Point Road,
Stamford, CT 06902 (203) 351-9000
Standards: FCC Part 15 Subpart B,
ANSI C63.4-2014
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful
interference, and (2) This device must accept any
interference received, including interference that
may cause undesirable operation.
DATE OF ISSUE: 09/17/2021
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
USER MANUAL
Before using the Class 2 Power Supply,
read these instructions carefully.
Use with adapter CA11
Rated input voltage:
100–240V AC, 50/60Hz 0.2A Max
Rated output: 3.6V DC 1000mA
CAUTION: Dry location use only. Do not expose
to liquids, vapor or rain. Do not operate any
appliance that has a damaged output cord
or housing. Be sure voltage is correct before
plugging in.
Maintain your look every day with the next
generation in stubble control technology.
The Close Trim Precision Trimmer has 15 ultra-
precise length settings, so you can maintain
your preferred facial hairstyle at all times.
Whether you’re looking for a short shadow
look, a longer stubble look, or even a short
beard, the Close Trim Precision Trimmer is
the ultimate in stubble control. The digital
length control gives precise adjustment from a
0.4mm5.0mm shadow so you can get exactly
the look you want. The unique floating, con-
touring head tracks the curves of your face for
exceptional accuracy and comfort to give you
an ultra-precise stubble shave.
FEATURES
Unique floating, contouring head tracks the
curves of your face for exceptional accuracy
and comfort.
Digital length control from a 0.4mm–
5.0mm shadow with precise automatic
adjustments for ultimate accuracy.
Advanced power performance with long-
lasting dual-battery system for reliable and fast
stubble shaving.
Advanced blade technology with electro-
chemically formed blades for extreme
sharpness and durability.
LCD screen displays selected length and
charge level.
Protective comb guide delivers ultimate
length consistency and is removable for easy
cleaning.
Rapid charging system90 minute charge
provides 60 minutes of use or 5-minute quick
charge provides power for a single stubble
shave.
• Ergonomic design provides curved body for
easy control and complete comfort in use.
INSTRUCTIONS
FOR USE
TAKING CARE OF YOUR TRIMMER
OILING THE BLADES
1. Oil the trimmer before first use and once a
month.
2. Over a piece of newspaper, turn the
trimmer on.
3. Hold and point the blades downward.
4. Spread one drop of oil across the blades.
5. Turn the trimmer off and wipe away any
excess oil.
NOTE:
1. Do not over-oil the blades, as this can
damage the motor.
2. Do not oil the motor bearing, as it is
permanently lubricated.
3. KEEP OIL AWAY FROM CHILDREN.
IMPORTANT: CHARGING
FIRST-TIME USE
The Close Trim Precision Trimmer is very easy
to use, but before you do anything, you must
take the time to charge the unit for 16 hours
prior to its first use. Even if you want to use it
plugged into your outlet, this initial super-
charge ensures optimum power performance to
give smooth, fast trimming every time. After the
first charge, a full charge should take 90
minutes. Maximum battery capacity will be
reached only after 3 charging/discharging
cycles. To charge:
• Connect the power adapter to the socket on
the underside of the trimmer.
• Plug the power adapter into a suitable outlet.
• Always check that the charging indicator on
the LCD comes on when you connect the power
lead into the product.
REGULAR CHARGING
• A full charge should take 90 minutes and
will supply enough power for a minimum of
60 minutes of continuous cordless use.
The remaining battery life is shown on the
LCD display.
• In order to maintain the optimum capacity of
the rechargeable battery, the appliance should
be recharged for 16 hours approximately every
3 months.
• The trimmer comes with a quick-charge
feature. A 5-minute charge will provide enough
power for approximately 3 minutes of use.
OPERATION WITH POWER CORD
(NOT CORDLESS)
• Connect the adapter to the base of the
appliance, plug the adapter into a suitable
electrical outlet and the appliance is now ready
for use.
• Always ensure the trimmer is switched off
and unplugged after use unless you intend to
charge the trimmer.
SWITCHING ON/OFF
To switch the trimmer on press the power
ON/OFF button and release. The selected length
will appear on the LCD display. To switch the
trimmer OFF, press the power ON/OFF button
and release. This will display the battery time
remaining in minutes before it disappears.
TRAVEL LOCK
To ensure the trimmer does not accidentally
turn on when traveling, it features a
travel lock:
To lock the trimmer, hold the ON/OFF button for
3 seconds, the comb guide will return to start
position and power will shut off. A countdown of
an additional 3 seconds will appear on the LCD
display. After the 3 second countdown, a pad
lock will appear on the screen.
To unlock the travel lock, hold the ON/OFF
button. A 3 second countdown will appear on
the LCD screen. After 3 seconds the trimmer
will turn on.
When charging the unit, the travel lock is
automatically deactivated.
PREPARATION FOR USE
Always inspect the trimmer before use to
ensure the cutting head is free of hair and
debris and is running smoothly.
USING THE COMB GUIDE
The comb guide allows you to change the
cutting length of your trimmer. You’ll need to
experiment to find your preferred length, but as
a guide, 0.4mm will give you very short stubble,
and 1.6mm will give you a longer stubble look.
2mm+ will give you a short beard.
• Ensure the comb guide is correctly positioned
by pushing the comb guide gently downward to
secure in place.
• Use the digital touch control or UP DOWN
button to adjust the telescopic comb guide to
the required length.
• The cutting lengths are displayed on the LCD
screen in millimeters (mm) – scroll through the
available length settings with the digital touch
controls. There are 15 length settings available:
0.4mm, 0.6, 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.5,
3.0, 3.5, 4.0, 4.5, 5.0mm.
• Select your desired length – the length setting
will then remain displayed on the
LCD screen.
• Push the power button to switch the
trimmer on.
USING THE TRIMMER WITHOUT THE
COMB GUIDE
Using the trimmer without the comb guide is
ideal for detailing/shaping and general tidying of
edges.
• To detach the comb guide, gently hold the
trimmer in one hand and with your thumb and
index finger, push up on each side of the comb
guide (Fig. 1). Flip the comb guide to the back
of the unit and lock it into position by clicking it
securely onto the fastener on the back of the
handle (Fig. 2).
Fig. 1 Fig. 2
• Switch the trimmer on by pushing the power
ON button. The LCD will illuminate and the
blades will start to move.
• If you are looking for an ultra-close fi nish, you
can use the trimmer without the comb guide.
This will give you an extremely short cut.
IMPORTANT: Please note that when using
the trimmer without the comb guide, the cutting
length will be below 0.4mm. The length setting
shown on the LCD screen will no longer be
relevant when the comb guide is detached.
STUBBLE TRIM BEST TIPS
• Use on clean, dry hair.
• If possible, when using for the fi rst time,
try to grow your facial hair for a few days before
cutting so you can trim down to a level that is
best for you.
• Set the cutting length as desired.
• It is always best to start cutting with a longer
length fi rst, then trim again if the length is
longer than desired.
• Hold the trimmer against the hair. The teeth of
the comb guide should be pointing upward and
should be fl at against the face.
• Move the trimmer upward through the hair, a
little at a time, against the direction of hair
growth. The fl oating and contouring head will
follow the curves of your face to ensure both
accuracy and comfort.
The trimmer will work most effectively
when cutting through the hair at its own
speed – never force it through the hair.
You may experience a little resistance when
trimming the neck area, where hair is thicker
and grows in many different directions. This is
completely normal. Just like when shaving, extra
time should be given when trimming under the
neck area.
• Never switch the trimmer off while in
the hair.
CLEANING & MAINTENANCE
• Regular cleaning will maintain the high
performance of your trimmer.
• Before cleaning or maintenance, switch off
and remove the power cord if connected.
• Detach the comb guide by gently lifting the
front of the comb guide from both sides and
ipping it over to the back of the unit. Lock it
into position by clicking it securely onto the
fastener on the back of the handle.
• Use the cleaning brush supplied to brush away
any hair and debris. Do not use a sharp object to
clean the trimmer blade.
The blades can be removed to aid cleaning.
To remove the blades, hold the handle of the
trimmer with one hand, place your thumb
underneath the blades and push the blades
away from the handle.
• Gently blow away any hair trapped beneath
the blades.
The blades can be rinsed under the tap.
After rinsing, the blades may need to be oiled.
See oiling instructions that follow.
• Be sure the blades are dry before reattaching
to the trimmer body.
• Be sure to clean the blades after each use and
before storing.
It is highly recommended to oil the blades once a
month. This ensures optimum cutting performance.
Also, oil the blades before you use the trimmer for
the rst time. To oil the blades, make sure the unit
is switched on. Gently squeeze the oil tube and
apply 1 or 2 drops of oil onto the blades. Leave the
unit on for a few seconds more to allow the oil to
thoroughly spread along the length of the blades.
Switch the unit off and remove any excess oil by
gently dabbing with a cloth.
BATTERY DISPOSAL
This appliance contains a nickel metal hydride
battery. To protect the environment, this
appliance and its battery must be disposed of
safely. At the end of its life, please take this
appliance to a recycling center, where the
internal rechargeable battery should be removed
by a professional and recycled separately. For
more information about the recycling of
electrical and battery-operated appliances,
please contact your local council offi ce or your
household waste disposal service. For specifi c
enquiries regarding the replacement of batteries
in this product, please contact our Conair
Consumer Care Line.
CONTAINS NICKEL METAL HYDRIDE
BATTERIES. MUST BE COLLECTED,
RECYCLED OR DISPOSED OF
PROPERLY. DO NOT DISPOSE OF
IN THE MUNICIPAL WASTE.
BATTERY REMOVAL INSTRUCTIONS
1 SCREW COVER
SCREW2
3DECORATIVE COVER
BLADE HEAD4
TROLLEY A/B
5
6SCREW
BATTERY
COB ASSEMBLY
7
CAREFULLY CUT HERE
WITH WIRE CUTTERS
TO REMOVETHE
BATTERY.
LIMITED THREE-YEAR WARRANTY
(U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your
unit free of charge for 36 months from the date
of purchase if the appliance is defective
in workmanship or materials.
To obtain service under this warranty, return the
defective product to the service center listed,
together with your purchase receipt. California
residents need only provide proof of purchase
and should call 1-800-3-CONAIR for shipping
instructions. In the absence of a purchase
receipt, the warranty period shall be
36 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS,
OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE 36-MONTH DURATION OF
THIS WRITTEN, LIMITED WARRANTY. Some
states do not allow limitations on how long an
implied warranty lasts, so the above limitations
may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF
THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER. Some states do
not allow the exclusion or limitation of special,
incidental, or consequential damages, so the
above limitation may not apply to you.
This warranty gives you specific legal rights,
and you may also have other rights, which
vary from state to state.
Please register this product at
www.conair.com/registration
©2022 Conair LLC
Service Center
Conair LLC
Service Department
7475 North Glen Harbor Blvd.
Glendale, AZ 85307
21PG080813
IB-17443


Produkt Specifikationer

Mærke: Conair
Kategori: Ikke kategoriseret
Model: GMT980

Har du brug for hjælp?

Hvis du har brug for hjælp til Conair GMT980 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Conair Manualer

Conair

Conair MASK2 Manual

1 Oktober 2024
Conair

Conair skn SFB11GK Manual

1 Oktober 2024
Conair

Conair Man GMTL6000 Manual

6 September 2024
Conair

Conair LNT1 Manual

6 September 2024
Conair

Conair Man GMT189R Manual

6 September 2024
Conair

Conair CD117NN Manual

2 September 2024
Conair

Conair LLT2 Manual

2 September 2024
Conair

Conair CLS1X Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Gigabyte

Gigabyte ODIN GT 550W Manual

23 November 2024
Stamos

Stamos S-PLASMA 60U Manual

23 November 2024
Velbus

Velbus VMBPIRO-W-20 Manual

23 November 2024
Honor

Honor 90 Pro Manual

23 November 2024
Honor

Honor 80 SE Manual

23 November 2024
Medela

Medela Safe & Dry Manual

22 November 2024
Jane

Jane First Potty Manual

22 November 2024