Conair GS108 Manual

Conair Ikke kategoriseret GS108

Læs nedenfor 📖 manual på dansk for Conair GS108 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

EXTREME

STEAM

TURBO

HANDHELD STEAMER

INSTRUCTION BOOKLET

For your safety and continued enjoyment

of this product, always read the instruction

book carefully before using.

ALL GS108 MODELS

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially

when children are present, basic safety

precautions should always be taken, including

the following:

READ ALL INSTRUCTIONS

BEFORE USING

DANGER – Any appliance is electrically

live even when the switch is off.

To reduce the risk of death by electric shock:

1. Always unplug appliance immediately

after use and before cleaning.

2. Do not place or store appliance where it can

fall or be pulled into a tub or sink.

3. Do not place in or drop into water or

other liquids.

4. Do not reach for an appliance that has fallen

into water. Unplug immediately.

5. Use only in a dry area.

WARNING – To reduce the risk of

burns, electrocution, fire, or injury to persons:

1. This appliance should never be left

unattended when plugged in.

2. This appliance is not a toy and is not to be

used by children.

3. Close supervision is necessary when this

appliance is used near children or individuals

with certain disabilities. Unsupervised use could

result in fire or personal injury.

4. Use this appliance only for its intended

use as described in this manual. Do not

use attachments not recommended by the

manufacturer.

5. Rest the appliance on a stable surface when

placing on its base.

6. Never operate this appliance if it has a

damaged cord or plug, if it is not working

properly, if it has been dropped or damaged,

or if it has been dropped into water. Do not

attempt to repair the appliance. Incorrect

reassembly or repair could cause a risk

of fire, electric shock, or injury to persons

when the appliance is used. Return the

appliance to an authorized service center for

examination and repair.

7. Keep the cord away from heated surfaces.

Do not allow cord to contact heated surfaces.

Do not pull or twist cord. Let appliance cool

completely before putting away. Loop cord

loosely around appliance when storing.

8. To reduce the risk of electric shock, this

appliance has a polarized plug (one blade is

wider than the other). As a safety feature, this

plug will fit in a polarized outlet only one way. If

the plug does not fit fully in the outlet, reverse

the plug. If it still does not fit, contact a qualified

electrician. Do not attempt to defeat this safety

feature.

9. Never drop or insert any object into

any opening.

10. Do not use outdoors or operate where

aerosol (spray) products are being used or

where oxygen is being administered.

11. If an extension cord is absolutely necessary,

a 15 ampere-rated cord should be used. Cords

rated for less amperage may overheat. Care

should be taken to arrange the cord so that the

cord cannot be pulled or tripped over.

12. Surfaces of this appliance are hot when

in use. Do not let heated surfaces touch eyes

or skin.

13. Do not place the steam nozzle directly on

any surface or on the appliance power cord

while it is hot or plugged in.

14. Unplug this appliance before filling or

emptying the water container and when not in

use.

15. Do not operate steamer without properly

filling the water container with distilled water.

16. Never yank cord to disconnect from

outlet; instead, grasp plug and pull

to disconnect.

17. Burns could occur from touching hot

surfaces, hot water, or steam. Use care when

removing water reservoir or when you turn a

steam appliance upside down – there may be

hot water in reservoir. Always position steamer

with head away from you and any other person

when turning on.

18. Do not hold hand in front of steam.

19. To reduce likelihood of circuit overload, do

not operate another high-wattage appliance on

the same circuit.

20. Use caution when installing or removing

an attachment, as it may contain hot water

from condensation. Ensure that the unit is off,

attachment is dry or cooled off to avoid contact

with hot water.

21. Never steam clothes you, or someone else,

are wearing.

22. When emitting steam, this appliance may

cause burns if it is used too close to the skin

or eyes, or if it is used incorrectly. To reduce

the risk of contact with hot water emitting from

the steam vents, test appliance before use by

holding it away from the body.

SAVE THESE

INSTRUCTIONS

OPERATING

INSTRUCTIONS

1. Fill water reservoir with distilled water.

2. Plug the unit into the electrical outlet.

3. Press the ON/OFF button located on the

back of the steamer to turn the unit on. The

HIGH SETTING light will illuminate and begin

blinking. Allow 10 seconds for the unit to

warm up. The appliance is ready to use when

the HIGH SETTING light stops blinking and

remains solid.

4. This steamer has a dry iron setting. Without

pressing the button, the soleplate ofSTEAM

the steamer will get hot to use as an iron.

5. The steamer has 4

steam settings. Press the

MODE button repeatedly

until you reach desired

setting. Choose LOW for

use on delicate fabrics,

up to TURBO for use on

thicker fabrics and heavily

wrinkled articles.

6. Press the button to emit steam. PickSTEAM

up steamer and begin steaming, pointing the

jets away from you and anyone in the room.

NOTE: This steamer has a SMART TOUCH

SENSOR feature. Steam will not emit until

steamer is picked up from flat surface.

7. To activate SMART TOUCH SENSOR, hold the

MODE button for 2 seconds until lights are

flashing. Once lights are flashing, the SMART

TOUCH SENSOR has been activated. Once

steamer is placed down on a flat surface,

SMART TOUCH SENSOR goes into auto pause.

To restart the steamer again, simply pick up

steamer and begin steaming.

8. Press ON/OFF button to turn unit OFF.

9. Unplug the device when it is not in use.

SANITIZING INSTRUCTIONS

1. P osition the garment steamer’s soleplate at

a minimum distance of 0.4 inch (1 cm) from

material to be treated.

2. Remain steaming in this position for 1 minute,

then move to the next area to be treated and

repeat.

ATTACHMENTS

CREASER ATTACHMENT -

Creates a crease in pants,

shirts, blouses and more.

DELICATES BONNET -

protects trims and safely steam

ﬁne fabrics.

2-IN-1 ATTACHMENT

Silicone Band - pulls fabric

taut for better results.

Bristle Brush - ensures steam

penetrates ﬁbers for a perfect

press, even on heavy fabrics.

USING ATTACHMENTS

With the garment steamer off and cool, snap

the Silicone Band, creaser or delicates bonnet

attachment over the steam head, ensuring it

is firmly affixed. At this point, for the 2-in-1

attachment, the Silicone Band can be used or

you can choose to affix either the Bristle Brush

insert into the channel on the top of the Silicone

Band attachment, as desired. NOTE: Only one

function of the 2-In-1 attachment can be used

at a time.

CAUTION: Use extreme care when changing

the attachments after the unit has been in

use, as the steam head will continue to be

hot.

STEAMING TIPS

1. First, test unit on an inconspicuous area of the

item to be steamed using the lowest STEAM

setting to ensure fabric can tolerate the effects

of steam. If there is no evidence of damage,

you can proceed to use the steamer on that

item.

2. To prepare your fabric for steaming, brush it

with the brush attachment. This will loosen the

fibers and allow better steam penetration.

3. Hang your garment or fabric. AvoidNOTE:

using metal clothes hangers, if possible.

CAUTION: If hanging garment on a door

while steaming, be careful not to damage

the door with steam.

4. Pass the steam jets just above the fabric

where the wrinkles are. It may take a few

passes to remove the wrinkles completely.

5. For heavier fabrics or severely wrinkled

fabrics, you may position the steamer head

directly on the fabric for a few seconds to

remove wrinkles. Be cautious when working

with delicate fabrics.

6. After use, turn unit by depressing theoff

STEAM button. Then press the ON/OFF button

to the OFF position. With dry hands, unplug

your garment steamer from the outlet. Empty

any remaining water from the tank to avoid

leakage. BE SURE TO PRESS THE ON/OFF

BUTTON TO THE OFF POSITION PRIOR TO

UNPLUGGING THE UNIT.

7. When steaming, always keep the unit in

motion. Do not continuously hold steamer

over one area or touch steamer jets directly

to fabric for more than a few seconds, as

this can cause damage, including shrinkage,

melting, or color shift on certain types of

material.

8. In the case of heavier, durable fabrics such,

as wool coats or bedding, the TURBO setting

and slower passes with the steamer may

be necessary to achieve desired results. As

always, start by testing on an inconspicuous

area of the item to be steamed, using the

regular steam setting to ensure fabric can

tolerate the effects of steam, and adjust your

technique as needed to obtain the results

desired.

GETTING TO KNOW YOUR STEAMER

Soleplat

Water

reserv

Built-in

stand

2-IN-1 ATTACHMENT

(A) Silicone Band -

Pulls fabric taut for

easier steaming.

(B) Bristle Brush -

Loosens fibers for bette

steam penetration.

Helps protect delicate fabrics

and trims.

(D) Creaser -

For perfect pleats and folds.

CONAIR GARMENT

STEAMING ACCESSORIES

(sold separately)

Door Press Pad

Model GDPP1

Steaming Mitt

Model GPP1

Fabric Shaver

Model CLS1X

LIMITED ONE-YEAR WARRANTY

(U.S. AND CANADA ONLY)

Conair will repair or replace (at our option)

your unit free of charge for 12 months from the

date of purchase if the appliance is defective in

workmanship or materials.

To obtain service under this warranty, return the

defective product to the service center listed,

together with your purchase receipt.

California residents need only provide proof of

purchase and should call 1-800-3-CONAIR

for shipping instructions. In the absence of a

purchase receipt, the warranty period shall be

12 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS,

OR LIABILITIES, INCLUDING BUT NOT

LIMITED TO THE IMPLIED WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED IN

DURATION TO THE 12-MONTH DURATION OF

THIS WRITTEN, LIMITED WARRANTY. Some

states do not allow limitations on how long an

implied warranty lasts, so the above limitations

may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE

FOR ANY SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES FOR BREACH OF

THIS OR ANY OTHER WARRANTY, EXPRESS

OR IMPLIED, WHATSOEVER. Some states do

not allow the exclusion or limitation of special,

incidental, or consequential damages, so the

above limitation may not apply to you. This

warranty gives you specific legal rights, and you

may also have other rights, which vary from

state to state.

FEDERAL COMMUNICATIONS

COMMISSION NOTICE

WARNING: Changes or modifications to this

unit not expressly approved by the party

responsible for compliance could void the

user’s authority to operate the equipment.

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This device may not cause

harmful interference, and (2) This device must

accept any interference received, including

interference that may cause undesired

operation.

NOTE: This equipment has been tested and

found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur

in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

SUPPLIER’S DECLARATION

OF CONFORMITY

Brand: Conair ®

Model No.: GS108

Description: Handheld Steamer

Responsible Party: Conair Corporation,

1 Cummings Point Road, Stamford, CT 06902

(203) 351-9000

Standards: FCC Part 15 Subpart B, ANSI

C63.4-2014

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful

interference, and (2) This device must accept any

interference received, including interference that

may cause undesired operation.

DATE OF ISSUE: 10/09/2020

IMPORTANT

FOR HOUSEHOLD USE ONLY

FILLING INSTRUCTIONS

1. Make sure the unit is unplugged.

2. Stand the unit on a table and grasp with one

hand.

3. Pull the reservoir out, away from the steamer

body.

4. The rubber inlet cover is located on the top

of the water reservoir.

5. Open the inlet cover and fill the reservoir

with distilled water (which can be found in

grocery stores). We recommend that you

use distilled water only, as this will prevent

mineral deposits in the boiler that can reduce

performance or clog the water system.

6. Close the inlet cover and return the reservoir

to its place, making sure that it snaps in

place and is secure.

Rubber Inlet Cover

Due to continuing product improvements,

the actual product purchased may differ

slightly from the one shown.

Service Center

Conair Corporation

Service Department

7475 N. Glen Harbor Blvd.

Glendale, AZ 85307

For information on any Conair product, call

1-800-3-CONAIR or visit us on the web at

www.conair.com

Please register this product at

www.conair.com/registration

Made in China

21PA075297 IB-16995

Produkt Specifikationer

Mærke:	Conair
Kategori:	Ikke kategoriseret
Model:	GS108

Har du brug for hjælp?

Hvis du har brug for hjælp til Conair GS108 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Conair Manualer

Conair NPTCCA01 Manual

10 December 2024

Conair True Glow PB8NPRF Manual

10 December 2024

Conair NPTCCA02 Manual

10 December 2024

Conair MiniPRO CS80N Manual

1 Oktober 2024

Conair MASK2 Manual

1 Oktober 2024

Conair skn SFB11GK Manual

1 Oktober 2024

Conair Man GMTL6000 Manual

6 September 2024

Conair LNT1 Manual

6 September 2024

Conair Man GMT189R Manual

6 September 2024

Conair InfinitiPRO 998 Manual

3 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg KIT6PX Manual

23 December 2024

Smeg KIT6CX Manual

23 December 2024

Smeg GTA-6 Manual

23 December 2024

Lucide Casper i 79166/19/12 Manual

23 December 2024

Lucide Merlina 78193/30/66 Manual

23 December 2024

Lucide Pippa 77583/81/30 Manual

23 December 2024

Lucide Pia 45380/04/30 Manual

23 December 2024

Lucide Pia 45280/01/30 Manual

23 December 2024

Lucide Anaka 45179/03/30 Manual

23 December 2024

Lucide Zych 45156/01/97 Manual

23 December 2024