Conair GS38R Manual


Læs nedenfor 📖 manual på dansk for Conair GS38R (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
®
EXTREME
STEAM
®
Instruction Booklet
For your safety and continued enjoyment
of this product, always read the instruction
book carefully before using.
All GS38 Models
IMPORTANT
SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety
precautions should always be taken,
including the following:
READ ALL INSTRUCTIONS
BEFORE USING
DANGER Any appliance is
electrically live even when the switch is off.
To reduce the risk of death by electric shock:
1. Always unplug appliance immediately
after use and before cleaning.
2. Do not place or store appliance where it
can fall or be pulled into a tub or sink.
3. Do not place in, or drop into water or
other liquids.
4. Do not reach for an appliance that has
fallen into water. Unplug immediately.
5. Use only in a dry area.
WARNING
To reduce the risk of
burns,
electrocution, fire, or injury to persons:
1. This appliance should never be left
unattended when plugged in.
2. This appliance is not a toy and is not to
be used by children.
3. Close supervision is necessary when this
appliance is used near children or individuals
with certain disabilities. Unsupervised use
could result in fire or personal injury.
4. Use this appliance only for its intended
use as described in this manual. Do not
use attachments not recommended by the
manufacturer.
5. Rest the appliance on a stable surface when
placing on its base.
6. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly, or if it has been dropped or
damaged, or dropped into water. Do not
attempt to repair the appliance. Incorrect
reassembly or repair could cause a risk
of fire, electric shock, or injury to persons
when the appliance is used. Return the
appliance to an authorized service center
for examination and repair.
7. Do not allow cord to contact heated
surfaces. Do not pull or twist cord. Let
appliance cool completely before putting away.
Loop cord loosely around appliance when
storing.
8. This appliance has a polarized plug (one
blade is wider than the other). As a safety
feature, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt
to defeat this safety feature.
9. Never drop or insert any object into any
opening.
10. Do not use outdoors or operate where
aerosol (spray) products are being used or
where oxygen is being administered.
11. Do not use an extension cord to operate
appliance.
12. Surfaces of this appliance are hot when in
use. Do not let heated surfaces touch eyes or
skin.
13. Do not place the steam nozzle directly on
any surface or on the appliance power cord
while it is hot or plugged in.
14. Unplug this appliance before filling or
emptying the water.
15. Do not operate steamer without properly
filling the water container with distilled water.
16. Never yank cord to disconnect from
outlet; instead, grasp plug and pull to
disconnect.
17. Burns could occur from touching hot
parts, hot water, or steam. Use care when
removing water reservoir or when you turn
a steam appliance upside down there may
be hot water in reservoir. Always position
steamer with head away from you and any
other person when turning on.
18. Do not hold hand in front of steam.
19. To reduce likelihood of circuit overload,
do not operate another high-wattage
appliance on the same circuit.
20. Use caution when installing or removing
an attachment as it may contain hot water
from condensation. Ensure that the unit is
off, attachment is dry or cooled off to avoid
contact with hot water.
21. Never steam clothes you, or someone
else, are wearing.
22. When emitting steam, this appliance may
cause burns if it is used too close to the skin
or eyes, or if it is used incorrectly. To reduce
the risk of contact with hot water emitting
from the steam vents, test appliance before
use by holding it away from the body.
SAVE THESE
INSTRUCTIONS
IMPORTANT
FOR HOUSEHOLD USE ONLY
FILLING INSTRUCTIONS
1. Make sure the unit is unplugged.
2. Stand the unit on a table and grasp
with one hand.
3. With other hand,
move the release
switch up toward the
steam head nozzle.
4. Pull the reservoir
out, away from the
steamer body.
5. The rubber inlet
cover is located
on the top of the
water reservoir.
6. Open the inlet cover and fill the reservoir
with distilled water (which can be found in
grocery stores). We recommend that you
use distilled water only as this will prevent
mineral deposits in the boiler that can reduce
performance or clog the water system.
7. Close the inlet cover and return the
reservoir to its place, making sure that it
snaps in place and is secure.
GETTING TO KNOW YOUR STEAMER
wer cord
aser with
uides
3-in-1 Attachment
Silicone Band
Pulls fabric taut for
easier steaming.
Bristle Brush
Opens fibers for better
steam penetration.
Low Temperature
Guide
Helps protect
delicate fabric.
OPERATING
INSTRUCTIONS
1. Fill water reservoir with distilled water.
We recommend that you use distilled water
only, as this will prevent mineral deposits in
the boiler that can reduce performance or
clog the water system.
2. Plug the unit into the electrical outlet.
3. The blue READY light will illuminate and
begin blinking. Allow 40 seconds for the unit to
warm up. The appliance is ready to use when
the READY light stops blinking and remains
solid. Note: Before first use or when the unit
has not been used for a long period of time, it
will be necessary to prime (i.e., fill with water)
the internal tank while the steamer prepares
to steam. You may hear a small tapping noise
during the heat-up process; this is normal.
4. Your steamer has 2
options for steam, regular
Steam and Turbo. Use the
Steam setting (blue button)
for delicate fabrics or
freshening lightly wrinkled
garments. Use the Turbo
setting (red button) for
thicker fabrics and heavily
wrinkled articles.
5. Pointing the steam jets away from you, and
anyone else in the room, press either the blue
Steam button or the red Turbo button to release
steam. Always have steam facing away from
you or anyone in the room.
6. When first using the device, test on an old
cloth, as there may be sediment left from the
manufacturing process or transportation.
7. To stop the flow of steam, depress the
button(s) that you have turned on, either the
red, blue, or both.
8. Unplug the device when it is not in use.
USING CREASER
This garment steamer has a built-in creaser
on the top of the unit. To use, slide garment
under the clip and align
edge with the pattern as
marked on the creaser.
Press the Steam button
and steam will issue from
the port on the top of the
unit. Slide the steamer
along the edge of the
garment to create a sharp
crease. Note: Steam will
continue to emit from the
steam slot on the
front of the unit during
creaser use!
USING 3-IN-1 ATTACHMENT
With the garment steamer off and cool, snap
the silicone brush attachment over the steam
head ensuring it is firmly affixed. At this point
the silicone brush can be used or you can
choose to affix either the Bristle Brush or
Delicate Fabric Guide inserts into the channel
on the top of the silicone Brush attachment as
desired. Note, only one function of the 3-In-1
attachment can be used at a time
CAUTION: Use extreme care when
changing the attachments after the unit
has been in use as the steam head will
continue to be hot.
STEAMING TIPS
1. First test unit on an inconspicuous area of
the item to be steamed using the regular Steam
setting to ensure fabric can tolerate the effects
of steam. If there is no evidence of damage, you
can proceed to use the steamer on that item.
2. To prepare your fabric for steaming, brush
it with the brush attachment. This will loosen
the fibers and allow better steam penetration.
3. Hang your garment or fabric. Note: Avoid
using metal clothes hangers, if possible.
4. Pass the steam jets just above the fabric
where the wrinkles are. It may take a few
passes to remove the wrinkles completely.
5. For heavier fabrics or severely wrinkled
fabrics, you may position the steamer head
directly on the fabric for a few seconds to
remove wrinkles. Be cautious when working
with delicate fabrics.
6. After use, turn unit off by depressing the
button(s) that you have turned on, either the
red, blue, or both. Empty any remaining water
from the tank to avoid leakage. With dry hands,
unplug your garment steamer from the outlet.
BE SURE TO PRESS THE BUTTONS “OFF
PRIOR TO UNPLUGGING THE UNIT.
7. CAUTION: If hanging garment on a door
while steaming, be careful not to
damage the door with steam.
8. When steaming, always keep the unit in
motion. Do not continuously hold steamer over
an area or touch steamer jets directly to fabric
for more than a few seconds as this can cause
damage, including shrinkage, melting, or color
shift on certain types of material.
9. In the case of heavier, durable fabrics such
as wool coats or bedding, the Turbo setting
and slower passes with the steamer may be
necessary to achieve desired results. As always,
start by testing on an inconspicuous area of the
item to be steamed using the regular Steam
setting to ensure fabric can tolerate the effects
of steam, and adjust your technique as needed
to obtain the results desired.
LIMITED ONE-YEAR WARRANTY
(U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your
unit free of charge for 12 months from the
date of purchase if the appliance is defective in
workmanship or materials.
To obtain service under this warranty, return the
defective product to either service center listed
below, together with your purchase receipt and
$12.00 for postage and handling.
Conair Corporation Conair Corporation
Service Department Service Department
150 Milford Road 7475 N. Glen Harbor Blvd.
East Windsor, NJ 08520 Glendale, AZ 85307
California residents need only provide proof of
purchase and should call 1-800-3-CONAIR
for shipping instructions. In the absence of a
purchase receipt, the warranty period shall be
12 months from the date of manufacture.
ANY IMPLIED WARRANTIES, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTY
OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE 12-MONTH DURATION OF
THIS WRITTEN, LIMITED WARRANTY. Some
states do not allow limitations on how long an
implied warranty lasts, so the above limitations
may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR
ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY, EXPRESS OR IMPLIED,
WHATSOEVER. Some states do not allow the
exclusion or limitation of special, incidental, or
consequential damages, so the above limitation
may not apply to you. This warranty gives you
specific legal rights, and you may also have other
rights, which vary from state to state.
Service Centers
Conair Corporation Conair Corporation
Service Department Service Department
150 Milford Road 7475 N. Glen Harbor Blvd.
East Windsor, NJ 08520 Glendale, AZ 85307
For information on any Conair product, call
1-800-3-CONAIR or visit us on the web at
www.conair.com
Please register this product at:
www.conair.com/registration
©2016 Conair Corporation
East Windsor, NJ 08520
Glendale, AZ 85307
Made in China
15PA016551 IB-13950


Produkt Specifikationer

Mærke: Conair
Kategori: Ikke kategoriseret
Model: GS38R

Har du brug for hjælp?

Hvis du har brug for hjælp til Conair GS38R stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Conair Manualer

Conair

Conair NPTCCA01 Manual

10 December 2024
Conair

Conair NPTCCA02 Manual

10 December 2024
Conair

Conair MASK2 Manual

1 Oktober 2024
Conair

Conair skn SFB11GK Manual

1 Oktober 2024
Conair

Conair Man GMTL6000 Manual

6 September 2024
Conair

Conair LNT1 Manual

6 September 2024
Conair

Conair Man GMT189R Manual

6 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024