Conair GS39 Manual

Conair Ikke kategoriseret GS39

Læs nedenfor 📖 manual på dansk for Conair GS39 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

gs39_19pa059678_ib_all_models_final.indd 1 1/7/19 3:41 PM

HANDHELD FABRIC T S EAMER

Instruction Booklet

For your safety and continued

enjoyment of this product,

always read the instruction

book carefully before using.

All GS39 Models

IMPORTANT

SAFETY

INSTRUCTIONS

When using electrical appliances, especially

when children are present, basic safety pre-

cautions should always be taken, including

the following:

READ ALL INSTRUCTIONS

BEFORE USING

DANGER – Any appliance is electri-

cally live even when the switch is off.

To reduce the risk of death by electric shock:

1. Always unplug appliance immediately

after using and before cleaning.

2. Do not place or store appliance where it

can fall or be pulled into a tub or sink.

3. Do not place in, or drop into water or other

liquids.

4. If an appliance falls into water, unplug it

immediately. Do not reach into the water.

WARNING –

To reduce the risk of

burns,

electrocution, fire, or injury to persons:

1. This appliance should never be left un-

attended when plugged in.

2. This appliance is not a toy! Keep away

from children.

3. Close supervision is necessary when this

appliance is used by or near children or indi-

viduals with certain disabilities. Unsupervised

use could result in fire or personal injury.

4. Use this appliance only for its intended

use as described in this manual. Do not use

attachments not recommended by the

manufacturer.

5. Never operate this appliance if it has a

damaged cord or plug, if it is not work-

ing properly, or if it has been dropped or

damaged, or dropped into water. Do not

attempt to repair the appliance. Incorrect

reassembly or repair could cause a risk

of fire, electric shock, or injury to per-

sons when the appliance is used. Return

the appliance to an authorized service

center for examination and repair.

6. Keep the cord away from heated surfaces.

Do not allow cord to contact heated surfaces.

Do not pull or twist cord. Let appliance cool

completely before putting away. Loop cord

loosely around appliance when storing.

7. To reduce the risk of electric shock, this

appliance has a polarized plug (one blade is

wider than the other). As a safety feature,

this plug will fit in a polarized outlet only

one way. If the plug does not fit fully in the

outlet, reverse the plug. If it still does not fit,

contact a qualified electrician to install the

proper outlet. Do not attempt to defeat this

safety feature.

8. Never drop or insert any object into any

opening.

9. Do not use outdoors or operate where

aerosol (spray) products are being used or

where oxygen is being administered.

10. Do not handle plug with wet hands.

11. If an extension cord is absolutely neces-

sary, a 15 ampere rated cord should be used.

Cords rated for less amperage may overheat.

Care should be taken to arrange the cord

so that the cord cannot be pulled or tripped

over.

12. Surfaces of this appliance may be hot

when in use. Do not let heated surfaces

touch eyes or skin.

13. Do not place the steam nozzle directly on

any surface or on the appliance power cord

while it is hot or plugged in.

14. Always disconnect appliance from

electrical outlet when filling with water or

emptying, and when not in use.

15. Do not operate steamer without properly

filling the water container with tap water.

16. Never yank cord to disconnect from

outlet; instead, grasp plug and pull to

disconnect.

17. Burns could occur from touching hot

parts, hot water, or steam. Use care when

removing water reservoir or when you turn

a steam appliance upside down – there may

be hot water in reservoir. Always position

steamer with head away from you and any

other person when turning on.

18. To reduce likelihood of circuit overload,

do not operate another high-wattage appli-

ance on the same circuit.

19. Use caution when installing or removing

an attachment as it may contain hot water

from condensation. Ensure that the attach-

ment is dry or cooled off to avoid contact

with hot water.

20. Never steam clothes you, or someone

else, are wearing.

21. Do not hold hand in front of steam.

22. When emitting steam, appliance may

cause burns if it is used too close to the skin

or eyes, or if it is used incorrectly. To reduce

the risk of contact with hot water emitting

from the steam vents, test appliance before

use by holding it away from the body.

SAVE THESE

INSTRUCTIONS

IMPORTANT

FOR HOUSEHOLD USE ONLY

FILLING INSTRUCTIONS

1. Make sure unit is unplugged.

2. Place the unit on its back on a flat and

stable surface.

3. While holding the top of the water reservoir

with one hand, and the other hand holding the

steamer just below the head, pull the reservoir

straight out.

4. Open the inlet cover and fill the reservoir

with tap water.

5. Close the inlet cover and return the

reservoir to its place, making sure that it

snaps in place.

GETTING TO KNOW

YOUR STEAMER

(not shown)

Steam Reset But ton

(remove water tank

to access button)

Ind

Anti-Calc

Fil

3 Removable Attachments

Creaser

For Per fect

Pleats And Folds

Bonnet

Helps Protect

Delicate Fabrics

Silicone Band

Pulls Fabric

Taut For Easier

Steaming

OPERATING

INSTRUCTIONS

1. Your garment steamer has a built-in

anti-calcium filter. You may fill the water

reservoir with tap water.

2. Plug the unit into the electrical outlet.

3. Press the power button, the light will start

to flash. Allow approximately 40 seconds for

the unit to warm up. The appliance is ready

to use when the flashing light turns solid.

4. Pointing the steam jets away from you,

and anyone else in the room, select the

steam rate by pressing the button on the

back of the steamer to either HI or LOW.

Always have steam facing away from you

or anyone in the room.

5. When first using the device, test on an

old cloth, as there may be sediment left from

the manufacturing process or transportation.

6. On the back of the steamer there is a

switch for HI and LOW settings. HI is for

heavier and badly wrinkled fabric and pro-

vides faster results. LOW should be used

for delicate fabrics in combination with the

delicate bonnet attachment.

7. To stop the flow of steam, move the switch

to the middle position for OFF.

8. The unit has a red Steam Reset button

located under the water tank. Only press it

if the unit does not steam after 15 seconds.

NOTE: The Steam Reset button does NOT

need to be pressed before each use.

9. Unplug the device when it is not in use.

ANTI-CALC SYSTEM

A resin filter inside the water reservoir

softens the water scale and prevents scale

buildup. The filter is permanent and does not

need replacing.

USING ATTACHMENTS

With the garment steamer off and cool,

insert the tab on the creaser attachment

into the underside of the garment steamer

head. The silicone band and steam bonnet

attachments snap into the top portion of the

creaser attachment. To apply one of these

attachments, simply line up the pins with the

holes on the creaser attachment and push in

until you hear a snap.

CAUTION: Use extreme care when changing

the attachments after the unit has been in use,

as the steam head will continue to be hot.

STEAMING TIPS

FOR DE-WRINKLING

1. To prepare your fabric for steaming, hang

your garment or fabric. NOTE: Avoid using

metal clothes hangers, if possible.

2. Pass the steam jets just above the fabric

where the wrinkles are. It may take a few

passes to remove the wrinkles completely.

3. After use, unplug steamer and empty any

remaining water from the tank to avoid leak-

age.

4. CAUTION: When hanging garment on a

door while steaming, be careful not to

damage the door with steam.

5. First test unit on an inconspicuous area of

the item to be steamed using the LOW setting

to ensure fabric can tolerate the effects of

steam. If there is no evidence of damage, you

can proceed to use the steamer on that item.

6. When steaming, always keep the unit in

motion and about one inch from the surface

of the item being steamed to avoid potential

damage. Do not continuously hold steamer

over an area or touch steamer jets directly to

fabric, as this can cause damage, including

shrinkage, melting, or color shift to certain

types of material.

7. In the case of heavier, durable fabrics, such

as wool coats or bedding, slower passes with

the steamer may be necessary to achieve

desired results. As always, start by testing

on an inconspicuous area of the item to be

steamed using the LOW setting to ensure

fabric can tolerate the effects of steam, and

adjust your technique as needed to obtain the

results desired.

TO KILL BEDBUGS

OR DUST MITES

Steam is a contact killer that can kill dust

mites, bedbugs and eggs. It must hit bugs

directly. When steaming to kill bedbugs, areas

to concentrate on are seams, edges, and folds

in the fabric. Direct the steamer nozzle about

half of an inch from the fabric to be steamed.

Hold the steamer head at a minor angle up off

of the surface. Do not hold flush against the

surface. Move at about an inch per second

and steam the entire area that is infested.

Check the surface behind the steamed sec-

tion after steaming. The surface should be

warm to the touch. If it’s cool, you’re moving

too fast. Move the steamer head from top to

bottom of the object you’re steaming. (Steam

rises!) Be cautious of surfaces that you can’t

steam, such as finishes on furniture, leather,

certain paints.Test on an inconspicuous area

before steaming the entire object.

NOTE: You may have to repeat the process

for best results.

LIMITED ONE-YEAR WARRANTY

(U.S. AND CANADA ONLY)

Conair will repair or replace (at our option)

your unit free of charge for 12 months from

the date of purchase if the appliance is defec-

tive in workmanship or materials.

To obtain service under this warranty, return

the defective product to either service center

listed below, together with your purchase

receipt and $12.00 for postage and handling.

Conair Corporation Conair Corporation

Service Department Service Department

150 Milford Road 7475 N. Glen Harbor Blvd.

East Windsor, NJ 08520 Glendale, AZ 85307

California residents need only provide proof of

purchase and should call 1-800-3-CONAIR

for shipping instructions. In the absence of a

purchase receipt, the warranty period shall be

12 months from the date of manufacture.

ANY IMPLIED WARRANTIES, INCLUDING BUT

NOT LIMITED TO THE IMPLIED WARRANTY

OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED

IN DURATION TO THE 12-MONTH DURATION

OF THIS WRITTEN, LIMITED WARRANTY.

Some states do not allow limitations on how

long an implied warranty lasts, so the above

limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE

FOR ANY SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES FOR BREACH OF

THIS OR ANY OTHER WARRANTY, EXPRESS

OR IMPLIED, WHATSOEVER.

Some states do not allow the exclusion or

limitation of special, incidental, or consequen-

tial damages, so the above limitation may not

apply to you.

This warranty gives you specific legal rights,

and you may also have other rights, which

vary from state to state.

Service Centers

Conair Corporation Conair Corporation

Service Department Service Department

150 Milford Road 7475 N. Glen Harbor Blvd.

East Windsor, NJ 08520 Glendale, AZ 85307

For information on any Conair product, call

1-800-3-CONAIR or visit us on the web at

www.conair.com

Please register this product at

www.conair.com/registration

East Windsor, NJ 08520

Glendale, AZ 85307

Made in China

19PA059678 IB-16177

Produkt Specifikationer

Mærke:	Conair
Kategori:	Ikke kategoriseret
Model:	GS39

Har du brug for hjælp?

Hvis du har brug for hjælp til Conair GS39 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Conair Manualer

Conair NPTCCA01 Manual

10 December 2024

Conair True Glow PB8NPRF Manual

10 December 2024

Conair NPTCCA02 Manual

10 December 2024

Conair MiniPRO CS80N Manual

1 Oktober 2024

Conair MASK2 Manual

1 Oktober 2024

Conair skn SFB11GK Manual

1 Oktober 2024

Conair Man GMTL6000 Manual

6 September 2024

Conair LNT1 Manual

6 September 2024

Conair Man GMT189R Manual

6 September 2024

Conair InfinitiPRO 998 Manual

3 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg KIT6PX Manual

23 December 2024

Smeg KIT6CX Manual

23 December 2024

Smeg GTA-6 Manual

23 December 2024

Lucide Casper i 79166/19/12 Manual

23 December 2024

Lucide Merlina 78193/30/66 Manual

23 December 2024

Lucide Pippa 77583/81/30 Manual

23 December 2024

Lucide Pia 45380/04/30 Manual

23 December 2024

Lucide Pia 45280/01/30 Manual

23 December 2024

Lucide Anaka 45179/03/30 Manual

23 December 2024

Lucide Zych 45156/01/97 Manual

23 December 2024