Conair GS51 Manual

Conair niet gecategoriseerd GS51

Læs nedenfor 📖 manual på dansk for Conair GS51 (2 sider) i kategorien niet gecategoriseerd. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

INSTRUCTION BOOKLET

For your safety and continued enjoyment

of this product, always read the instruction

book carefully before using.

FABRIC STEAMER

ALL GS51 MODELS

IMPORTANT

SAFETY

INSTRUCTIONS

When using electrical appliances, especially

when children are present, basic safety

precautions should always be taken,

including the following:

READ ALL INSTRUCTIONS

BEFORE USING

DANGER – Any appliance is

electrically live even when the switch is off.

To reduce the risk of death by electric shock:

1. Always unplug appliance immediately

after use and before cleaning.

2. Do not place or store appliance where it

can fall or be pulled into a tub or sink.

3. Do not place in or drop into water or

other liquids.

4. Do not reach for an appliance that has

fallen into water. Unplug immediately.

5. Use only in a dry area.

WARNING –

To reduce the risk

of burns,

electric shock, fire, or injury to

persons:

1. This appliance should never be left

unattended when plugged in.

2. This appliance is not a toy and is not to

be used by children.

3. Close supervision is necessary when this

appliance is used near children or individuals

with certain disabilities. Unsupervised use

could result in fire or personal injury.

4. Use this appliance only for its intended

use as described in this manual. Do not

use attachments not recommended by the

manufacturer.

5. Rest the appliance on a stable surface

when placing on its base.

6. Never operate this appliance if it has a

damaged cord or plug, if it is not working

properly, or if it has been dropped or

damaged or dropped into water. Do not

attempt to repair the appliance. Incorrect

reassembly or repair could cause a risk

of fire, electric shock, or injury to persons

when the appliance is used. Return the

appliance to an authorized service center

for examination and repair.

7. Do not allow cord to contact heated

surfaces. Do not pull or twist cord. Let

appliance cool completely before putting

away. Loop cord loosely around appliance

when storing.

8. This appliance has a polarized plug (one

blade is wider than the other). As a safety

feature, this plug will fit in a polarized outlet

only one way. If the plug does not fit fully

in the outlet, reverse the plug. If it still does

not fit, contact a qualified electrician. Do not

attempt to defeat this safety feature.

9. Never drop or insert any object into any

opening.

10. Do not use outdoors or operate where

aerosol (spray) products are being used or

where oxygen is being administered.

11. Do not use an extension cord to operate

appliance.

12. Surfaces of this appliance are hot when

in use. Do not let heated surfaces touch eyes

or skin.

13. Do not place the steam nozzle directly on

any surface or on the appliance power cord

while it is hot or plugged in.

14. Unplug this appliance before filling or

emptying the water reservoir.

15. Do not operate steamer without properly

filling the water container with distilled water.

16. Never yank cord to disconnect from

outlet; instead, grasp plug and pull to

disconnect.

17. Burns could occur from touching hot

parts, hot water, or steam. Use care when

removing water reservoir or when you turn

a steam appliance upside down – there may

be hot water in reservoir. Always position

steamer with head away from you and any

other person when turning it on.

18. Do not hold hand in front of steam.

19. To reduce likelihood of circuit overload,

do not operate another high-wattage

appliance on the same circuit.

20. Use caution when installing or removing

an attachment as unit may contain hot water

from condensation. Ensure that the unit is off

and attachment is dry or cooled off to avoid

contact with hot water.

21. Never steam clothes you, or someone

else, are wearing.

22. When emitting steam, this appliance may

cause burns if it is used too close to the skin

or eyes or if it is used incorrectly. To reduce

the risk of contact with hot water emitting

from the steam vents, test appliance before

use by holding it away from the body.

SAVE THESE

INSTRUCTIONS

IMPORTANT

FOR HOUSEHOLD USE ONLY

FILLING INSTRUCTIONS

1. Make sure the unit is unplugged.

2. Stand the unit on a

table and grasp with

one hand.

3. With other hand,

pull the reservoir

out, away from the

steamer body.

5. The rubber inlet

cover is located on

the top of the water

reservoir.

6. Open the inlet

cover and fill the reservoir with water

(preferably distilled, which can be found in

grocery stores). We recommend that you

use distilled water only as this will prevent

mineral deposits in the boiler that can reduce

performance or clog the water system.

7. Close the inlet cover and return the

reservoir to its place, making sure that it

snaps in place and is secure.

GETTING TO KNOW YOUR STEAMER

2-in-1

Silicone Ban

taut for easie

Bristle Brus

to let steam r

Mode

button

Aluminum sol

with nonstick

OPERATING

INSTRUCTIONS

1. Fill water reservoir with preferably distilled

water (See Filling Instructions.)

2. Plug the unit into the electrical outlet.

3. Press the button to turn steamer on.ON/OFF

4. The blue and red READY light will illuminate

and begin blinking. Allow 35 seconds for the

unit to warm up. The appliance is ready to use

when the red light stops blinking and remains

solid. NOTE: Before first use or when the unit

has not been used for a long period of time, it

will be necessary to prime (i.e., fill with water)

the internal tank while the steamer prepares

to steam. You may hear a small tapping noise

during the heat-up process; this is normal.

5. Your steamer has 3

options for steam: To

choose steam setting

press the +/- Mode button.

One light indicates Low

mode for delicate fabrics

or for freshening lightly

wrinkled garments. Two

lights indicate Medium

mode for everyday cottons

and polyester fabrics with moderate wrinkles.

Three lights indicate High Turbo mode for

thicker fabrics and heavily wrinkled fabrics.

6. Pointing the steam jets away from you, and

anyone else in the room, press the Steam

button to release steam. Always have steam

facing away from you or anyone in the

room.

7. When first using the device, test on an old

cloth, as there may be sediment left from the

manufacturing process or transportation.

8. To stop the flow of steam, depress the

Steam button.

9. Press ON/OFF button to turn unit off.

10. Unplug the device when it is not in use.

USING 2-IN-1 ATTACHMENT

With the garment

steamer off and cool,

snap the silicone band

attachment over the

steam head, ensuring it

is firmly affixed. At this

point, the silicone band

can be used, or you can choose to affix the

bristle brush insert into the channel on the

top of the silicone band attachment. Press

the ON/OFF button to turn steamer on. NOTE:

Only one function of the 2-in-1 attachment

can be used at a time.

CAUTION: Use extreme care when

changing the attachments after the unit

has been in use, as the steam head will

continue to be hot.

AUTO SHUTOFF FEATURE

When the machine is powered on continuously

for 15 minutes, it will enter the automatic

power-off mode. Power indicator light will flash

to indicate shutoff.

CONAIR GARMENT

STEAMING ACCESSORIES

(sold separately)

Steaming/Storage

Station

Model DH1

Steaming Mitt

Model GPP1

Door Press Pad

Model GDPP1

STEAMING TIPS FOR PRESSING

1. First, test unit on an inconspicuous area

of the item to be steamed, using the regular

Steam setting to ensure fabric can tolerate

the effects of steam. If there is no evidence of

damage, you can proceed to use the steamer

on that item.

2. To prepare your fabric for steaming, brush

it with the brush attachment. This will loosen

the fibers and allow better steam penetration.

3. Hang your garment or fabric. NOTE: Avoid

using metal clothes hangers, if possible.

4. Pass the steam jets just above the fabric

where the wrinkles are. It may take a few

passes to remove the wrinkles completely.

5. For heavier fabrics or severely wrinkled

fabrics, you may position the steamer head

directly on the fabric for a few seconds to

remove wrinkles. Be cautious when working

with delicate fabrics.

6. After use, turn unit off by depressing the

ON/OFF button. Empty any remaining water

from the tank to avoid leakage. With dry hands,

unplug your garment steamer from the outlet.

BE SURE TO PRESS THE ON/OFF BUTTON

PRIOR TO UNPLUGGING THE UNIT.

7. CAUTION: If hanging garment on a

door while steaming, be careful not to

damage the door with steam.

8. When steaming, always keep the unit in

motion. Do not continuously hold steamer over

an area or touch steamer jets directly to fabric

for more than a few seconds, as this can

cause damage, including shrinkage, melting,

or color shift on certain types of material.

9. In the case of heavier, durable fabrics such

as wool coats or bedding, the high setting

and slower passes with the steamer may be

necessary to achieve desired results. As always,

start by testing on an inconspicuous area of the

item to be steamed, using the regular Steam

setting to ensure fabric can tolerate the effects

of steam, and adjust your technique, as needed,

to obtain the results desired.

FEDERAL COMMUNICATIONS

COMMISSION NOTICE

WARNING: Changes or modifications to this

unit not expressly approved by the party

responsible for compliance could void the

user’s authority to operate the equipment.

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This device may not cause

harmful interference, and (2) This device must

accept any interference received, including

interference that may cause undesirable

operation.

NOTE: This equipment has been tested and

found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur

in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

SUPPLIER’S

DECLARATION OF

CONFORMITY

Brand: Conair

Model No.: GS51

Description: Handheld Garment Steamer

Responsible Party: Conair Corporation,

1 Cummings Point Road,

Stamford, CT 06902 (203) 351-9000

Standards: FCC Part 15 Subpart B,

ANSI C63.4-2014

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful

interference, and (2) This device must accept

any interference received, including interference

that may cause undesired operation.

DATE OF ISSUE: 12/12/2020

LIMITED ONE-YEAR WARRANTY

(U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your

unit free of charge for 12 months from the

date of purchase if the appliance is defective in

workmanship or materials.

To obtain service under this warranty, return the

defective product to the service center listed,

together with your purchase receipt.

California residents need only provide proof of

purchase and should call 1-800-3-CONAIR

for shipping instructions. In the absence of a

purchase receipt, the warranty period shall be

12 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR

LIABILITIES, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTY OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE,

SHALL BE LIMITED IN DURATION TO THE

12-MONTH DURATION OF THIS WRITTEN,

LIMITED WARRANTY. Some states do not allow

limitations on how long an implied warranty lasts,

so the above limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR

ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES FOR BREACH OF THIS OR ANY

OTHER WARRANTY, EXPRESS OR IMPLIED,

WHATSOEVER. Some states do not allow the

exclusion or limitation of special, incidental, or

consequential damages, so the above limitation

may not apply to you. This warranty gives you

specific legal rights, and you may also have other

rights, which vary from state to state.

Service Center

Conair Corporation

Service Department

7475 N. Glen Harbor Blvd.

Glendale, AZ 85307

For information on any Conair product, call

1-800-3-CONAIR or visit us on the web at

www.conair.com

Please register this product at

www.conair.com/registration

Made in China

IB-17040

20PA076530

Produkt Specifikationer

Mærke:	Conair
Kategori:	niet gecategoriseerd
Model:	GS51

Har du brug for hjælp?

Hvis du har brug for hjælp til Conair GS51 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

niet gecategoriseerd Conair Manualer

Conair Man GMTL6000 Manual

6 September 2024

Conair LNT1 Manual

6 September 2024

Conair Man GMT189R Manual

6 September 2024

Conair CD117NN Manual

2 September 2024

2 September 2024

2 September 2024

2 September 2024

2 September 2024

Conair PG1000L Manual

2 September 2024

Conair FR02 Manual

2 September 2024

niet gecategoriseerd Manualer

Nyeste niet gecategoriseerd Manualer

IFM O6T207 Manual

16 September 2024

Güde LG 18-30 Manual

16 September 2024

Uniden WPP 15W + D800 Manual

16 September 2024

JUNG BTCCD508 Manual

16 September 2024

Samsung AC036TN4PKC Manual

16 September 2024

Nedis ACON2503AT Manual

16 September 2024

16 September 2024

16 September 2024

16 September 2024

16 September 2024