Conair GS59 Manual

Conair Ikke kategoriseret GS59

Læs nedenfor 📖 manual på dansk for Conair GS59 (3 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/3

EXTREME

STEAM

H A N D H E L D F A B R I C S T E A M E R

Instruction Booklet

For your safety and continued enjoyment

of this product, always read the instruction

book carefully before using.

All GS59 Models

IMPORTANT SAFETY

INSTRUCTIONS

When using electric appliances, especially when

children are present, basic safety precautions

should always be taken, including the following:

READ ALL INSTRUCTIONS

BEFORE USING

DANGER – Any appliance is electrically

live even when the switch is off.

To reduce the risk of death by electric shock:

1. Always unplug appliance immediately

after use and before cleaning.

2. Do not place or store appliance where it can

fall or be pulled into a tub or sink.

3. Do not place in, or drop into water or

other liquids.

4. Do not reach for an appliance that has fallen

into water. Unplug immediately.

5. Use only in a dry area.

WARNING – To reduce the risk of

burns, electrocution, fire, or in

1. This appliance should nev

unattended when plugged in

2. This appliance is not a toy e

used by children.

3. Close supervision is necess

appliance is used near childre

with certain disabilities. Unsup d

result in fire or personal injury

4. Use this appliance only for its intended

use as described in this manual. Do not

use attachments not recommended by the

manufacturer.

5. Rest the appliance on a stable surface when

placing on its base.

6. Never operate this appliance if it has a

damaged cord or plug, if it is not working

properly, if it has been dropped or damaged,

or dropped into water. Do not attempt to

repair the appliance. Incorrect reassembly

or repair could cause a risk of fire, electric

shock, or injury to persons when the

appliance is used. Return the appliance to

an authorized service center for examination

and repair.

7. Keep the cord away from heated surfaces.

Do not allow cord to contact heated surfaces.

Do not pull or twist cord. Let appliance cool

completely before putting away. Loop cord

loosely around appliance when storing.

8. To reduce the risk of electric shock, this

appliance has a polarized plug (one blade is

wider than the other). As a safety feature, this

plug will fit in a polarized outlet only one way. If

the plug does not fit fully in the outlet, reverse

the plug. If it still does not fit, contact a qualified

electrician. Do not attempt to defeat this safety

feature.

9. Never drop or insert any object into

any opening.

10. Do not use outdoors or operate where

aerosol (spray) products are being used or

where oxygen is being administered.

11. If an extension cord is absolutely necessary,

a 15 ampere-rated cord should be used. Cords

rated for less amperage may overheat. Care

should be taken to arrange the cord so that the

cord cannot be pulled or tripped over.

12. Surfaces of this appliance are hot when

in use. Do not let heated surfaces touch eyes

or skin.

13. Do not place the steam nozzle directly on

any surface or on the appliance power cord

while it is hot or plugged in.

14. Unplug this appliance before filling or

emptying the water container and when not in

use.

15. Do not operate steamer without properly

filling the water container with distilled water.

16. Never yank cord to disconnect from

outlet; instead, grasp plug and pull

to disconnect.

17. Burns could occur from touching hot parts,

hot water, or steam. Use care when removing

water reservoir or when you turn a steam

appliance upside down – there may be hot

water in reservoir. Always position steamer

with head away from you and any other person

when turning on.

18. Do not hold hand in front of steam.

19. To reduce likelihood of circuit overload, do

not operate another high-wattage appliance on

the same circuit.

20. Use caution when installing or removing

an attachment as it may contain hot water

from condensation. Ensure that the unit is off,

attachment is dry or cooled off to avoid contact

with hot water.

21. Never steam clothes you, or someone else,

are wearing.

22. When emitting steam, this appliance may

cause burns if it is used too close to the skin

or eyes, or if it is used incorrectly. To reduce

the risk of contact with hot water emitting from

the steam vents, test appliance before use by

holding it away from the body.

SAVE THESE

INSTRUCTIONS

IMPORTANT

FOR HOUSEHOLD USE ONLY

FILLING INSTRUCTIONS

1. Make sure the unit is unplugged.

2. Stand the unit on a table and grasp

with one hand.

3. With other hand, move the release switch up

toward the STEAM button.

4. Pull the reservoir out, away from the steamer

body.

5. The rubber inlet cover is located on the top

of the water reservoir.

6. Open the inlet cover and fill the reservoir with

distilled water (which can be found in grocery

stores).

We recommend that you use distilled water

only, as this will prevent mineral deposits in the

boiler that can reduce performance or clog the

water system.

7. Close the inlet cover and return the reservoir

to its place, making sure that it snaps in place

and is secure.

Rubber Inlet Cover

GETTING TO KNOW YOUR STEAMER

ON/OFF

button and 9 ft.

power cord

3-in-1 Attachment

Silicone Band

Pulls fabric taut for

easier steaming.

Bristle Brush

Loosens ﬁbers for better

steam penetration.

Delicate Fabric

Spacer

Helps protect delicate

fabric and trims.

Steam nozzles

Built-in creaser clip

with garment guides

Ready light - Blue

Ceramic-coated

soleplate

r lights

Setting button

Steam button

Water reservoir

release switch

Easy-to-ﬁll

water reservoir

Steam setting indicato

OPERATING

INSTRUCTIONS

1. Fill water reservoir with distilled water.

2. Plug the unit into the electrical outlet.

3. Press the ON/OFF button to turn steamer ON.

4. The blue READY light will illuminate and

begin blinking. Allow 40 seconds for the unit to

warm up. The appliance is ready to use when

the READY light stops blinking and remains

solid. NOTE: Before first use or when the unit

has not been used for a long period of time, it

will be necessary to prime (i.e., fill with water)

the internal tank while the steamer prepares

to steam. You may hear a small tapping noise

during the heat-up process; this is normal.

5. Your steamer has 5

steam settings. Press the

SETTING button repeatedly

until you reach your desire

setting. One red light

indicates the minimum

steam rate for use on

delicate fabrics, while 5

red lights indicate TURBO

BOOST setting for use on

thicker fabrics and heavily wrinkled articles.

Always have the steam facing away from

you or anyone else in the room.

6. Press STEAM button to release the flow of

steam.

7. To stop the flow of steam, depress the

STEAM button.

8. When first using the device, test on an old

cloth, as there may be sediment left from the

manufacturing process or transportation.

9. Press ON/OFF button to turn unit OFF.

10. Unplug the device when it is not in use

USING CREASER

This garment steamer has

a built-in creaser on the top

of the unit. To use, slide

garment under the clip and

align edge with the pattern

as marked on the creaser.

Press the button STEAM

and steam will issue from

the port on the top of the

unit. Slide the steamer along

the edge of the garment to

create a sharp crease. NOTE:

Steam will continue to emit

from the steam nozzle on the front of the unit

during creaser use.

USING 3-IN-1 ATTACHMENT

Fig. 1

Fig. 3

Fig. 2

With the garment steamer

off and cool, snap the

Silicone Band attachment

(Fig. 1) over the steam

head, ensuring it is firmly

affixed. At this point the

Silicone Band can be used

or you can choose to affix

either the Bristle Brush (Fig.

2)) or Delicate Fabric Spac

(Fig. 3) inserts into the

channel on the top of the

Silicone Band attachment

as desired. NOTE: Only

one function of the 3-In-1

attachment can be used at

a time.

CAUTION: Use extreme care when changing

the attachments after the unit has been in

use, as the steam head will continue to be

hot.

STEAMING TIPS

1.. First, test unit on an inconspicuous area

the item to be steamed using the Steamlowest

setting to ensure fabric can tolerate the effects

of steam. If there is no evidence of damage, you

can proceed to use the steamer on that item.

2.. To prepare your fabric for steaming, brush

with the brush attachment. This will loosen the

fibers and allow better steam penetration.

3.. Hang your garment or fabric AvoidNOTE:

using metal clothes hangers, if possible.

CAUTION: If hanging garment on a door while

steaming, be careful not to damage the door

with steam.

4.. Pass the steam jets just above the fabr

where the wrinkles are. It may take a few passes

to remove the wrinkles completely.

5.. For heavier fabrics or severely wrinkl

fabrics, you may position the steamer head

directly on the fabric for a few seconds to

remove wrinkles. Be cautious when working with

delicate fabrics.

6.. After use, turn uni by depressing theOFF

STEAM button. Then press the ON/OFF button

to the OFF position. With dry hands, unplug your

garment steamer from the outlet. Empty any

remaining water from the tank to avoid leakage.

BE SURE TO PRESS THE BUTTON TOON/OFF

THE OFF POSITION PRIOR TO UNPLUGGING

THE UNIT.

7.. When steaming, always keep the unit

motion. Do not continuously hold steamer over

an area or touch steamer jets directly to fabric

for more than a few seconds, as this can cause

damage, including shrinkage, melting, or color

shift on certain types of material.

8.. In the case of heavier, durable fabrics su

as wool coats or bedding, the BOOSTTURBO

setting (5 red indicator lights) and slower

passes with the steamer may be necessary

to achieve desired results. As always, start by

testing on an inconspicuous area of the item to

be steamed, using the regular Steam setting to

ensure fabric can tolerate the effects of steam,

and adjust your technique as needed to obtain

the results desired.

TO KILL BEDBUGS

OR DUST MITES

Steam is a contact killer that can kill dust

mites, bedbugs and eggs. It must hit bugs

directly. When steaming to kill bedbugs, areas

to concentrate on are seams, edges, and folds

in the fabric. Direct the steamer nozzle about

half of an inch from the fabric to be steamed.

Hold the steamer head at a minor angle up off

of the surface. Do not hold flush against the

surface. Move at about an inch per second and

steam the entire area that is infested. Check

the surface behind the steamed section after

steaming. The surface should be warm to

the touch. If it’s cool, you’re moving too fast.

Move the steamer head from top to bottom of

the object you’re steaming. (Steam rises!) Be

cautious of surfaces that you can’t steam, such

as finishes on furniture, leather, certain paints.

Test on an inconspicuous area before steaming

the entire object. Please note: You may have to

repeat the process for best results.

LIMITED ONE-YEAR WARRANTY

(U.S. AND CANADA ONLY)

Conair will repair or replace (at our option)

your unit free of charge for 12 months from the

date of purchase if the appliance is defective in

workmanship or materials.

To obtain service under this warranty, return the

defective product to either service center listed

below, together with your purchase receipt and

$12.00 for postage and handling.

California residents need only provide proof of

purchase and should call 1-800-3-CONAIR

for shipping instructions. In the absence of a

purchase receipt, the warranty period shall be

12 months from the date of manufacture.

ANY IMPLIED WARRANTIES, INCLUDING BUT

NOT LIMITED TO THE IMPLIED WARRANTY

OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED IN

DURATION TO THE 12-MONTH DURATION OF

THIS WRITTEN, LIMITED WARRANTY. Some

states do not allow limitations on how long an

implied warranty lasts, so the above limitations

may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE

FOR ANY SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES FOR BREACH OF

THIS OR ANY OTHER WARRANTY, EXPRESS

OR IMPLIED, WHATSOEVER. Some states do

not allow the exclusion or limitation of special,

incidental, or consequential damages, so the

above limitation may not apply to you. This

warranty gives you specific legal rights, and you

may also have other rights, which vary from

state to state.

Due to continuing product improvements, the

actual product purchased may differ slightly

from the one shown.

Service Centers

Conair Corporation Conair Corporation

Service Department Service Department

150 Milford Road 7475 N. Glen Harbor Blvd.

East Windsor, NJ 08520 Glendale, AZ 85307

For information on any Conair product, call

1-800-3-CONAIR or visit us on the web at

www.conair.com

Please register this product at

www.conair.com/registration

East Windsor, NJ 08520

Glendale, AZ 85307

Made in China

18PA053085 IB-15663A

Produkt Specifikationer

Mærke:	Conair
Kategori:	Ikke kategoriseret
Model:	GS59

Har du brug for hjælp?

Hvis du har brug for hjælp til Conair GS59 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Conair Manualer

Conair MiniPRO CS80N Manual

1 Oktober 2024

Conair MASK2 Manual

1 Oktober 2024

Conair skn SFB11GK Manual

1 Oktober 2024

Conair Man GMTL6000 Manual

6 September 2024

Conair LNT1 Manual

6 September 2024

Conair Man GMT189R Manual

6 September 2024

Conair InfinitiPRO 998 Manual

3 September 2024

Conair CD117NN Manual

2 September 2024

Conair LLT2 Manual

2 September 2024

Conair CLS1X Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron Overbridge Manual

26 November 2024

Elektron Sidstation Manual

26 November 2024

SKROSS World Adapter Pro+ Manual

26 November 2024

SKROSS PRO – World & USB Manual

26 November 2024

SoundTube IPD-RS82-EZ Manual

26 November 2024

Kramer 4x1VB Manual

26 November 2024

Kramer RC-63A Manual

26 November 2024

SoundTube IPD-HP82-EZ Manual

26 November 2024

Kramer RK-KVM-1U-PP3 Manual

26 November 2024

Gioteck VX-2 (PS3) Manual

26 November 2024